FlySpark Mothership Drone Release Mount | Child-Drone Air-Launch Dropper for 8-inch FPV-Class Drones, Single-Lock Servo Latch, 130×48×52 mm, 5 V PWM & ~90 g
FlySpark Mothership Drone Release Mount | Child-Drone Air-Launch Dropper for 8-inch FPV-Class Drones, Single-Lock Servo Latch, 130×48×52 mm, 5 V PWM & ~90 g — dostępny na eksport do Polska. Orientacyjna cena Cena na zapytanie (PLN, ex-works). Wiążąca oferta, termin i dokumentacja użytkownika końcowego na WhatsApp.
Cena podstawowa — FlySpark Mothership Release - Single-Lock PWM (130 × 48 × 52 mm, 5 V, approx. 90 g)
POA
Bez podatku GST · Cena końcowa zależna od konfiguracji i ilości
FlySpark mothership drone release: air-launch an 8-inch FPV-class child drone from a large carrier. 130×48×52 mm, ~90 g, 5 V PWM. India supply & export.
The FlySpark Mothership Release is a single-lock servo-latch mount that lets a large carrier multirotor air-launch an FPV-class child drone of 8 inches or smaller, or a payload of similar size. It measures 130 × 48 × 52 mm, weighs about 90 g and is triggered by a 5 V PWM signal over a 3-pin servo lead. It comes in strap-mount and quick-release versions.
FlySpark Mothership Drone Release Mount | Child-Drone Air-Launch Dropper for 8-inch FPV-Class Drones, Single-Lock Servo Latch, 130×48×52 mm, 5 V PWM & ~90 g — key specifications
Child aircraft / payload
FPV-class drone of 8 inches or smaller, or similar-size payload
Mother aircraft
Large multirotors (enterprise hexacopters, heavy-lift quadcopters) with a spare 5 V PWM output
Latch
Single-lock servo latch
Dimensions (L × W × H)
130 × 48 × 52 mm
Weight
Approx. 90 g (single-lock unit)
Supply voltage
5 V from servo rail
Connector / signal
3-pin servo lead (signal, +5 V, ground); PWM
Versions
Single-lock PWM (strap/zip-tie mount); single-lock SQ (quick-release interface, base sold separately)
Price
On request
Use cases
Air-launching a small FPV drone from a heavy-lift carrier to extend its reach
Release of 8-inch-class payloads from enterprise multirotors
Mothership / child-drone concept testing in R&D
Standards & references
India Drone Rules, 2021 (G.S.R. 589(E)) — Both the carrier and the released child drone are unmanned aircraft; each must be registered and operated under the Rules.
FlySpark Mothership Drone Release Mount is a single-lock child-drone air-launch dropper that lets a large carrier drone lift a smaller FPV-class drone of 8 inches or less, fly it to the work area and release it in flight. The 130 × 48 × 52 mm mount weighs approximately 90 g, runs on 5 V and opens its servo-driven latch on a standard PWM signal from the mother aircraft’s flight controller or receiver.
FlySpark Mothership drone release mount product overview videoFlySpark Mothership drone release mount under a large hexacopter carrying a 7-inch FPV-class child drone over a training field
The Mothership release is part of the FlySpark UAV Payload Droppers & Release Systems range, supplied and supported in India by AnuShakti Infotech Pvt. Ltd., with export enquiries welcome from verified end users.
Small FPV-class drones are agile and inexpensive but limited in range, endurance and radio line of sight. Carrying one on a mothership saves the child drone’s battery for the task itself, lifts it above terrain masking and lets a single crew deploy it into valleys, over water, behind structures or far beyond its ground-launch range. The same mount can also release other payloads in the same size class, such as sensor pods, relay nodes, marker smoke canisters or rescue pouches.
FlySpark Mothership drone release mount specification sheet – 130 × 48 × 52 mm, approx. 90 g, 5 V PWM single-lock latch for 8-inch FPV-class child drones
WHY CHOOSE THE FLYSPARK MOTHERSHIP DRONE RELEASE
The mount is deliberately simple: one servo, one lock and one standard 3-pin PWM lead. There is no proprietary controller to integrate, so it works with almost any flight controller or receiver that can drive a servo, and with CRSF / ELRS-only aircraft through the FlySpark ELRS-to-PWM output module. At about 90 g it barely affects the carrier’s payload budget, leaving the lift margin for the child drone itself.
Two versions share the same body. The single-lock PWM version straps or zip-ties directly to the mother aircraft for a dedicated mothership airframe. The single-lock SQ version uses a quick-release interface so the same mount can be moved between carrier aircraft in seconds; the aircraft-side quick-release base is sold separately.
FlySpark Mothership drone release mount three-quarter view – grey single-lock body, micro servo, top latch lugs and hook-and-loop strap
MOTHERSHIP DRONE RELEASE KEY FEATURES
• Carries and air-releases an 8-inch-or-smaller FPV-class child drone
• Also releases other payloads in the same size class
• Single servo-driven lock for one clean release per sortie
• Compact 130 × 48 × 52 mm body
• Lightweight: approx. 90 g
• 5 V supply from the servo rail
• Standard PWM trigger from flight controller or receiver
• Hook-and-loop strap and zip-tie mounting (PWM version)
• Quick-release interface for fast aircraft swaps (SQ version)
• Works with CRSF / ELRS-only aircraft via the ELRS-to-PWM module (sold separately)
• Child drone keeps its own radio, video and flight controller
• Hanger fit confirmed by FlySpark for the end user’s approved payload
FlySpark Mothership drone release mount dimensions drawing – 130 × 48 × 52 mm (L × W × H), approx. 90 g
HOW THE MOTHERSHIP RELEASE WORKS
The mount sits under the mother aircraft and its 3-pin lead plugs into a spare PWM output on the flight controller or receiver, which also supplies the 5 V servo rail. The pilot assigns a two-position switch, or a servo command from the ground control software, to that output. With the switch in the locked position the servo holds the latch closed around the child drone’s hanger point. Moving the switch opens the latch and the child drone drops clear of the carrier, after which the child pilot flies it on its own control and video link.
Before every mission, bench-test the latch with propellers removed, confirm the PWM endpoints, load the child drone and carry out a pull test on the latch.
FlySpark Mothership drone release mount latch close-up – single servo-driven lock, steel D-ring and hook-and-loop strap tab on the grey printed housingFlySpark Mothership drone release wiring diagram – 3-pin PWM servo lead, 5 V supply, flight controller or receiver output and ELRS-to-PWM option
COMPATIBLE AIRCRAFT & MOUNTING
Mother aircraft: large multirotors such as enterprise hexacopters and heavy-lift quadcopters with enough lift margin for the 90 g mount plus the child drone and its battery, a spare 5 V PWM servo output or receiver channel, and a flat underside or landing-gear rail for the strap or quick-release base.
Child aircraft: FPV-class drones of 8 inches or smaller, or other payloads in the same size class. Payload fit confirmed by FlySpark for the end user’s approved payload, including the hanger point that engages the latch.
FlySpark Mothership release mount under a heavy-lift hexacopter on the launch pad with an 8-inch FPV-class child drone hooked to the latch before take-offFlySpark Mothership child-drone air-launch sequence – mount, load, transit, arm and release from a large carrier droneFlySpark Mothership drone release mount air-launching a small FPV-class search drone from a large carrier drone over hills and a river valley
MOTHERSHIP RELEASE VARIANTS
• Single-lock PWM – 130 × 48 × 52 mm, 5 V, PWM, approx. 90 g; strap / zip-tie mounting to the mother aircraft
• Single-lock SQ – same 130 × 48 × 52 mm, 5 V, PWM body with a quick-release interface; aircraft-side quick-release base sold separately
For armed forces, paramilitary units, border and internal-security agencies, the Mothership release turns a heavy-lift drone into a carrier that places small drones, relays and sensors exactly where they are needed, without sending personnel forward.
• Mothership deployment of small ISR drones beyond their ground-launch range
• Communications relay: carry a small relay drone to altitude and release it over terrain masking
• Sensor, beacon and relay-node emplacement in valleys, forests and across water
• Perimeter-sensor seeding along borders and around temporary bases
• Marker and screening smoke from M18-class smoke canisters (size permitting)
• Search and rescue of personnel in mountains, jungle and maritime zones
• Emergency resupply of light items: tourniquet kits, radios, batteries and water purification tabs
• Decoy and reflector release for training and signature-management exercises
• ISR training, EOD and CBRN team training with inert training payload drops
• Integration of other authorised payloads by the end user in accordance with national law and procurement rules
CIVILIAN & COMMERCIAL APPLICATIONS
For rescue services, utilities, researchers and media teams, an air-launched child drone reaches places a ground-launched small drone cannot, while the carrier keeps a strong link overhead.
• Search and rescue: deploy a small search drone into ravines, collapsed structures or flooded areas
• Mountain and maritime rescue: extend the reach of small camera drones over water and ridgelines
• Bridge, dam, tower and power-line inspection with a small drone launched close to the structure
• Disaster response: drop radios, flotation aids or first-aid pouches to stranded people
• Wildlife research: release small tracking or survey drones and sensor pods in remote habitat
• Agriculture: seed balls and bio-control capsule drops over hard-to-reach plots
• Film, events and sports coverage with an air-launched FPV-class camera drone
• University and R&D research into cooperative and multi-drone (mothership / swarm) operations
FlySpark Mothership release mount carrying a small FPV-class inspection drone to a high-voltage transmission tower for close-up utility inspectionFlySpark Mothership drone release mount carrying a small FPV-class inspection drone toward a coastal bridge
COMPARE THE FLYSPARK DROPPER RANGE
The Mothership release is the FlySpark option for carrying and air-launching a complete child drone. For dropping small payloads directly from a camera drone or FPV-class drone, or for releasing several payloads in sequence, choose one of the sibling droppers below.
• FlySpark ZD1-V3 – single-channel lightweight dropper for camera drones and FPV-class drones (LED, PWM and SQ)
• FlySpark ZD2-V3 – dual-channel dropper with two independently controlled release points
• FlySpark ZD4 / ZD6 / ZD8 – 4-, 6- and 8-channel multi-payload droppers for larger custom-built drones
• FlySpark XD2 / XD4 – pin-pull release droppers for light payloads on camera and FPV-class drones
• FlySpark M18SD – parallel-rack dropper for M18-class smoke canisters
• FlySpark ELRS-to-PWM output module – converts a CRSF / ELRS receiver signal into a PWM servo output for any dropper
FlySpark Mothership drone release mount rear three-quarter view showing the strap, cradle and latch lugs
STANDARD SUPPLY
• FlySpark Mothership single-lock release mount (PWM or SQ version as ordered)
• Integrated micro servo with 3-pin PWM lead
• Hook-and-loop mounting strap
• Quick-start wiring and set-up guide
• Aircraft-side quick-release base for SQ, child drone, mother aircraft and ELRS-to-PWM module sold separately
IMPORTANT USE NOTE
The FlySpark Mothership Drone Release Mount is supplied only to verified end users. The buyer is responsible for using lawful payloads, obtaining airspace permissions and complying with drone regulations and export controls. Release child drones and payloads only over a cleared area, never fly or release over people, and keep within the mother aircraft’s rated payload.
FREQUENTLY ASKED QUESTIONS
Q: What is a mothership drone release mount?
A: It is a servo-operated release that fits under a large carrier drone (the mothership) and holds a smaller child drone or payload. On a switch command the latch opens and the child drone is released in flight, so it can start its own mission far from the launch point.
Q: What is the FlySpark Mothership Drone Release Mount?
A: It is a single-lock child-drone air-launch dropper measuring 130 × 48 × 52 mm and weighing approximately 90 g. It runs on 5 V and is triggered by a standard PWM servo signal from the mother aircraft’s flight controller or receiver.
Q: What size of child drone can it carry?
A: It is designed for FPV-class drones of 8 inches or smaller, or other payloads in that size class. Child-drone and payload fit is confirmed by FlySpark for the end user’s approved payload before supply.
Q: Which mother aircraft is it suitable for?
A: Any large multirotor with enough lift margin for the 90 g mount plus the child drone and its battery, a spare 5 V PWM output or receiver channel, and a flat underside or landing-gear rail for the strap or quick-release base. Typical carriers are enterprise hexacopters and heavy-lift quadcopters.
Q: How is the release triggered?
A: Assign a switch on the radio (or a servo command from the ground control software) to a spare PWM output. One switch position keeps the latch locked; the other opens it and releases the child drone.
Q: What is the difference between the PWM and SQ versions?
A: Both use the same 130 × 48 × 52 mm, 5 V, PWM single-lock body. The PWM version is strapped or zip-tied directly to the mother aircraft, while the SQ version uses a quick-release interface so the mount can be swapped between aircraft in seconds. The aircraft-side quick-release base for SQ is sold separately.
Q: My mother aircraft only has a CRSF / ELRS receiver. Can I still use it?
A: Yes. Add the FlySpark ELRS-to-PWM output module, which converts the receiver’s serial signal into a PWM servo output and includes a 5 V regulator. It is sold separately.
Q: Does the child drone fly on its own link?
A: Yes. The child drone keeps its own radio, video and flight controller. The mothership only carries and releases it; the child pilot arms and flies it after release according to the child drone’s own procedures.
Q: Why use a mothership instead of flying the small drone from the ground?
A: Small FPV-class drones have limited range and endurance. Carrying them on a large drone extends their reach, saves their battery for the task itself, lifts them above terrain masking for a better link, and lets one crew deploy them into valleys, over water or behind obstacles.
Q: What is the weight of the release mount?
A: Approximately 90 g for the single-lock unit. For the SQ version, add the weight of the aircraft-side quick-release base.
Q: What voltage does it need?
A: 5 V, taken from the servo rail of the flight controller or receiver output it is plugged into.
Q: Can it drop payloads other than drones?
A: Yes. It can release other payloads in the same size class, such as sensor or beacon pods, relay nodes, marker smoke canisters or rescue pouches, provided FlySpark confirms the hanger fit and the mother aircraft has enough lift margin.
Q: What is the price of the mothership drone release in India?
A: Price is on request and depends on the version (PWM or SQ), quantity and any custom hanger fit for your child drone. Contact FlySpark on WhatsApp or email for a quotation in INR or for export.
Q: What is the lead time, and do you export?
A: Lead time is confirmed with the quotation. FlySpark supplies across India and handles export enquiries subject to end-user verification, applicable export-control rules and documentation.
Q: Can the release be used to carry weapons?
A: No. FlySpark supplies this mount only to verified end users for lawful payloads such as drones, sensors, relays, marker smoke, training items and rescue supplies. Integration of any other payload is the end user’s responsibility and must comply with national law, procurement rules and export controls.
Q: Is it safe to release a child drone in flight?
A: It is safe when done over a cleared area, with airspace permission, with both pilots briefed, and after a ground bench test of the latch with propellers removed. Never release over people, roads or property.
Q: How do I test it before a mission?
A: With propellers removed, power the mother aircraft, toggle the release switch several times and confirm the latch opens and closes fully. Then load the child drone, do a pull test on the latch and check the PWM endpoint settings.
Q: Does the mount affect the mother aircraft’s flight?
A: The mount itself adds about 90 g. The child drone adds its own weight and drag below the centre of gravity, so check the mother aircraft’s payload limit, hover throttle and wind limits before flight.
Q: How does it compare with other FlySpark droppers?
A: Other FlySpark droppers release small payloads such as rescue pouches, smoke canisters or sensor pods from one or many channels. The mothership release is the dedicated option for carrying and air-launching a complete child drone of up to 8 inches.
Q: What warranty is included?
A: Warranty covers manufacturing defects for 1 year under approved use and normal operating conditions. Crash damage, overload, wrong wiring or unauthorised modification may not be covered.
Q: Does FlySpark provide integration support?
A: Yes. FlySpark / AnuShakti Infotech Pvt. Ltd. advises on carrier aircraft selection, PWM channel set-up, hanger fit for your child drone and safe release procedures.
Konfiguracje misji
Konfiguracja (2)
Select your operational configuration. Pricing may vary — request a formal quote for deployment quantities.
Single-lock child-drone release with PWM trigger and strap / zip-tie mounting to the mother aircraft.
SKU: FSP-DRP-MOTHERSHIP-PWM
Unit Price (PLN, ex-works)POAAvailable
Single-lock child-drone release with PWM trigger and quick-release interface; aircraft-side quick-release base sold separately.
Aircraft-side quick-release base (SQ), ELRS-to-PWM module, child drone, mother aircraft
settingsSafety & Compliance 6
End Users
Supplied only to verified end users
Lawful Use
Buyer responsible for lawful payloads, airspace permissions and export controls
Operation
Never fly or release over people; release only over a cleared area
Pre-flight Check
Bench-test latch with propellers removed and pull-test the loaded child drone
Warranty
1 Year manufacturing defect support under approved use and normal operating conditions
Supplier
FlySpark / AnuShakti Infotech Pvt. Ltd.
Często zadawane pytania
What size drone can the FlySpark Mothership Release carry?
An FPV-class child drone of 8 inches or smaller, or another payload in that size class. The carrier must lift the roughly 90 g mount plus the child drone and its battery.
How is the Mothership Release triggered?
By a 5 V PWM servo signal on a 3-pin lead (signal, +5 V, ground) from a spare output on the mother aircraft.
What are the size and weight of the Mothership Release?
130 × 48 × 52 mm and about 90 g for the single-lock unit.
Is there a quick-release version?
Yes. The single-lock SQ version has a quick-release interface; the aircraft-side base is sold separately.
Can FlySpark export the FlySpark Mothership Drone Release Mount internationally?
Yes. The FlySpark Mothership Drone Release Mount ships to defense, security, and critical-infrastructure buyers in our 10 export markets and other authorized destinations, with full export documentation — end-user certification, dual-use classification, and destination-specific compliance handled before dispatch.
What configurations of the FlySpark Mothership Drone Release Mount are available?
The FlySpark Mothership Drone Release Mount is offered in 2 configurations so you can match range, payload, and integration requirements. Custom builds are available for volume orders.
Do you provide technical support and documentation for the FlySpark Mothership Drone Release Mount?
Every FlySpark Mothership Drone Release Mount order includes datasheets, integration guidance, and compliance paperwork. Our engineering team supports commissioning, spares, and field deployment.
How do I request a quote for the FlySpark Mothership Drone Release Mount?
Pricing for the FlySpark Mothership Drone Release Mount is quoted on request. Contact the export desk with your quantity and destination for a formal quote that includes export documentation, compliance handling, and freight.
Czy FlySpark może eksportować FlySpark Mothership Drone Release Mount | Child-Drone Air-Launch Dropper for 8-inch FPV-Class Drones, Single-Lock Servo Latch, 130×48×52 mm, 5 V PWM & ~90 g do Polska?
Tak. FlySpark wysyła do Polska na trasie Indie → Europa transport lotniczy; tranzyt trwa zazwyczaj 7–12 dni. Przesyłki zwalczające bezzałogowe statki powietrzne i statki radiowe wymagają autoryzowanego użytkownika końcowego i mogą wymagać zezwolenia na import — zajmujemy się dokumentacją eksportową razem z Tobą.
Ile kosztuje FlySpark Mothership Drone Release Mount | Child-Drone Air-Launch Dropper for 8-inch FPV-Class Drones, Single-Lock Servo Latch, 130×48×52 mm, 5 V PWM & ~90 g w Polska ?
Cena orientacyjna to Cena na zapytanie (PLN, ex-works Indie, przeliczona z INR na 2026-11-20). Koszty transportu, ubezpieczenia i cła importowe Polska są podawane osobno; formalna oferta jest wystawiana w PLN na WhatsAppie lub e-mailu.
Jak długo trwa dostawa do Polska?
Standardowe konfiguracje są wysyłane w ciągu 3–6 tygodni od potwierdzenia zamówienia; transport lotniczy do Polska zajmuje 7–12 dni. Konstrukcje niestandardowe i większe ilości są planowane na podstawie wyceny.
publicKupuję FlySpark Mothership Drone Release Mount | Child-Drone Air-Launch Dropper for 8-inch FPV-Class Drones, Single-Lock Servo Latch, 130×48×52 mm, 5 V PWM & ~90 g z Polska
FlySpark eksportuje FlySpark Mothership Drone Release Mount | Child-Drone Air-Launch Dropper for 8-inch FPV-Class Drones, Single-Lock Servo Latch, 130×48×52 mm, 5 V PWM & ~90 g do Polska z naszego zakładu w Gandhinagarze w Indiach. Systemy są wysyłane na trasie Indie → Europa transport lotniczy , a typowy czas transportu wynosi 7–12 dni po otrzymaniu dokumentacji. Oferty są wystawiane w PLN ( EXW Gandhinagar; DAP/CIF na życzenie ), a każda przesyłka zawiera fakturę handlową, specyfikację pakowania i świadectwo pochodzenia.
Czas realizacji: 3–6 tygodni ex-works plus 7–12 dni tranzytu do Polska
Cło importowe i podatek VAT/GST w Polska są płatne przez kupującego; deklarujemy prawidłowe kody HS i wartości
Płatność: przelew bankowy (TT) lub akredytywa; zaliczka 50%, reszta przed wysyłką
Zdalne uruchomienie, szkolenie operatorów i pomoc w zakresie części zamiennych w Polska za pośrednictwem połączenia wideo i kuriera
verified_userSprzęt radiowy i przeciwukładowy (RF) jest dostarczany wyłącznie autoryzowanym użytkownikom końcowym. W zależności od przepisów Polska może być wymagane zezwolenie na import i certyfikat użytkownika końcowego (EUC) — nasz dział eksportu przygotowuje dokumenty przed wysyłką.
Global export · local pricing
FlySpark Mothership Drone Release Mount | Child-Drone Air-Launch Dropper for 8-inch FPV-Class Drones, Single-Lock Servo Latch, 130×48×52 mm, 5 V PWM & ~90 g — priced in 15 country editions
FlySpark exports this system worldwide with end-user certification, dual-use classification, and destination-specific compliance. Open your country edition for indicative local pricing; the binding quote is issued on WhatsApp in your currency.
Skontaktuj się z naszym zespołem ds. inżynierii obronnej w celu uzyskania wsparcia w zakresie zamówień hurtowych, personalizacji, dokumentacji zgodności i wdrożenia w terenie.