FlySpark Mothership Drone Release Mount | Child-Drone Air-Launch Dropper for 8-inch FPV-Class Drones, Single-Lock Servo Latch, 130×48×52 mm, 5 V PWM & ~90 g — view 1

FlySpark Mothership Drone Release Mount | Child-Drone Air-Launch Dropper for 8-inch FPV-Class Drones, Single-Lock Servo Latch, 130×48×52 mm, 5 V PWM & ~90 g

Auf Lager
FlySpark

FlySpark Mothership Drone Release Mount | Child-Drone Air-Launch Dropper for 8-inch FPV-Class Drones, Single-Lock Servo Latch, 130×48×52 mm, 5 V PWM & ~90 g — verfügbar für den Export nach Deutschland. Indikativer Preis Preis auf Anfrage (EUR, ab Werk). Verbindliches Angebot, Lieferzeit und Endverbleibsdokumente per WhatsApp.

Grundpreis — FlySpark Mothership Release - Single-Lock PWM (130 × 48 × 52 mm, 5 V, approx. 90 g)
POA
Zzgl. MwSt. · Endpreis abhängig von Konfiguration und Menge

FlySpark mothership drone release: air-launch an 8-inch FPV-class child drone from a large carrier. 130×48×52 mm, ~90 g, 5 V PWM. India supply & export.

Konfiguration : FlySpark Mothership Release - Single-Lock PWM (130 × 48 × 52 mm, 5 V, approx. 90 g)

Bestellungen werden von unserem Vertrieb per WhatsApp mit einem Angebot in EUR bestätigt.

Menge

Preis auf Anfrage – schreiben Sie uns auf WhatsApp für Preis und Lieferzeit.

verified_user

Qualitätssicherung nach Militärstandard

lock

Exportkonforme Dokumentation

headset_mic

Technischer Support rund um die Uhr

Vertrieb kontaktieren

Mon – Sun · 19:30 – 03:30 IST · [email protected]

FSP-DRP-MOTHERSHIP-PWM
Aktiv
2
32
  • flyspark
  • flyspark-mothership
  • mothership-drone
  • mothership-drone-release
  • child-drone-release
  • drone-air-launch
  • air-launched-drone
  • drone-dropper
  • drone-payload-dropper
  • drone-payload-release
  • payload-release-mount
  • drone-release-mechanism

Key facts

At a glance

The FlySpark Mothership Release is a single-lock servo-latch mount that lets a large carrier multirotor air-launch an FPV-class child drone of 8 inches or smaller, or a payload of similar size. It measures 130 × 48 × 52 mm, weighs about 90 g and is triggered by a 5 V PWM signal over a 3-pin servo lead. It comes in strap-mount and quick-release versions.

FlySpark Mothership Drone Release Mount | Child-Drone Air-Launch Dropper for 8-inch FPV-Class Drones, Single-Lock Servo Latch, 130×48×52 mm, 5 V PWM & ~90 g — key specifications
Child aircraft / payloadFPV-class drone of 8 inches or smaller, or similar-size payload
Mother aircraftLarge multirotors (enterprise hexacopters, heavy-lift quadcopters) with a spare 5 V PWM output
LatchSingle-lock servo latch
Dimensions (L × W × H)130 × 48 × 52 mm
WeightApprox. 90 g (single-lock unit)
Supply voltage5 V from servo rail
Connector / signal3-pin servo lead (signal, +5 V, ground); PWM
VersionsSingle-lock PWM (strap/zip-tie mount); single-lock SQ (quick-release interface, base sold separately)
PriceOn request

Use cases

  • Air-launching a small FPV drone from a heavy-lift carrier to extend its reach
  • Release of 8-inch-class payloads from enterprise multirotors
  • Mothership / child-drone concept testing in R&D

Standards & references

Sources: FlySpark catalog data; FlySpark product page. Updated .

Intelligence Brief

Missionsübersicht

FlySpark Mothership Drone Release Mount is a single-lock child-drone air-launch dropper that lets a large carrier drone lift a smaller FPV-class drone of 8 inches or less, fly it to the work area and release it in flight. The 130 × 48 × 52 mm mount weighs approximately 90 g, runs on 5 V and opens its servo-driven latch on a standard PWM signal from the mother aircraft’s flight controller or receiver.

FlySpark Mothership drone release mount product overview video
FlySpark Mothership drone release mount under a large hexacopter carrying a 7-inch FPV-class child drone over a training field
FlySpark Mothership drone release mount under a large hexacopter carrying a 7-inch FPV-class child drone over a training field

The Mothership release is part of the FlySpark UAV Payload Droppers & Release Systems range, supplied and supported in India by AnuShakti Infotech Pvt. Ltd., with export enquiries welcome from verified end users.

Small FPV-class drones are agile and inexpensive but limited in range, endurance and radio line of sight. Carrying one on a mothership saves the child drone’s battery for the task itself, lifts it above terrain masking and lets a single crew deploy it into valleys, over water, behind structures or far beyond its ground-launch range. The same mount can also release other payloads in the same size class, such as sensor pods, relay nodes, marker smoke canisters or rescue pouches.

FlySpark Mothership drone release mount specification sheet – 130 × 48 × 52 mm, approx. 90 g, 5 V PWM single-lock latch for 8-inch FPV-class child drones
FlySpark Mothership drone release mount specification sheet – 130 × 48 × 52 mm, approx. 90 g, 5 V PWM single-lock latch for 8-inch FPV-class child drones

WHY CHOOSE THE FLYSPARK MOTHERSHIP DRONE RELEASE

The mount is deliberately simple: one servo, one lock and one standard 3-pin PWM lead. There is no proprietary controller to integrate, so it works with almost any flight controller or receiver that can drive a servo, and with CRSF / ELRS-only aircraft through the FlySpark ELRS-to-PWM output module. At about 90 g it barely affects the carrier’s payload budget, leaving the lift margin for the child drone itself.

Two versions share the same body. The single-lock PWM version straps or zip-ties directly to the mother aircraft for a dedicated mothership airframe. The single-lock SQ version uses a quick-release interface so the same mount can be moved between carrier aircraft in seconds; the aircraft-side quick-release base is sold separately.

FlySpark Mothership drone release mount three-quarter view – grey single-lock body, micro servo, top latch lugs and hook-and-loop strap
FlySpark Mothership drone release mount three-quarter view – grey single-lock body, micro servo, top latch lugs and hook-and-loop strap

MOTHERSHIP DRONE RELEASE KEY FEATURES

  • • Carries and air-releases an 8-inch-or-smaller FPV-class child drone
  • • Also releases other payloads in the same size class
  • • Single servo-driven lock for one clean release per sortie
  • • Compact 130 × 48 × 52 mm body
  • • Lightweight: approx. 90 g
  • • 5 V supply from the servo rail
  • • Standard PWM trigger from flight controller or receiver
  • • Hook-and-loop strap and zip-tie mounting (PWM version)
  • • Quick-release interface for fast aircraft swaps (SQ version)
  • • Works with CRSF / ELRS-only aircraft via the ELRS-to-PWM module (sold separately)
  • • Child drone keeps its own radio, video and flight controller
  • • Hanger fit confirmed by FlySpark for the end user’s approved payload
FlySpark Mothership drone release mount dimensions drawing – 130 × 48 × 52 mm (L × W × H), approx. 90 g
FlySpark Mothership drone release mount dimensions drawing – 130 × 48 × 52 mm (L × W × H), approx. 90 g

HOW THE MOTHERSHIP RELEASE WORKS

The mount sits under the mother aircraft and its 3-pin lead plugs into a spare PWM output on the flight controller or receiver, which also supplies the 5 V servo rail. The pilot assigns a two-position switch, or a servo command from the ground control software, to that output. With the switch in the locked position the servo holds the latch closed around the child drone’s hanger point. Moving the switch opens the latch and the child drone drops clear of the carrier, after which the child pilot flies it on its own control and video link.

Before every mission, bench-test the latch with propellers removed, confirm the PWM endpoints, load the child drone and carry out a pull test on the latch.

FlySpark Mothership drone release mount latch close-up – single servo-driven lock, steel D-ring and hook-and-loop strap tab on the grey printed housing
FlySpark Mothership drone release mount latch close-up – single servo-driven lock, steel D-ring and hook-and-loop strap tab on the grey printed housing
FlySpark Mothership drone release wiring diagram – 3-pin PWM servo lead, 5 V supply, flight controller or receiver output and ELRS-to-PWM option
FlySpark Mothership drone release wiring diagram – 3-pin PWM servo lead, 5 V supply, flight controller or receiver output and ELRS-to-PWM option

COMPATIBLE AIRCRAFT & MOUNTING

Mother aircraft: large multirotors such as enterprise hexacopters and heavy-lift quadcopters with enough lift margin for the 90 g mount plus the child drone and its battery, a spare 5 V PWM servo output or receiver channel, and a flat underside or landing-gear rail for the strap or quick-release base.

Child aircraft: FPV-class drones of 8 inches or smaller, or other payloads in the same size class. Payload fit confirmed by FlySpark for the end user’s approved payload, including the hanger point that engages the latch.

FlySpark Mothership release mount under a heavy-lift hexacopter on the launch pad with an 8-inch FPV-class child drone hooked to the latch before take-off
FlySpark Mothership release mount under a heavy-lift hexacopter on the launch pad with an 8-inch FPV-class child drone hooked to the latch before take-off
FlySpark Mothership child-drone air-launch sequence – mount, load, transit, arm and release from a large carrier drone
FlySpark Mothership child-drone air-launch sequence – mount, load, transit, arm and release from a large carrier drone
FlySpark Mothership drone release mount air-launching a small FPV-class search drone from a large carrier drone over hills and a river valley
FlySpark Mothership drone release mount air-launching a small FPV-class search drone from a large carrier drone over hills and a river valley

MOTHERSHIP RELEASE VARIANTS

  • • Single-lock PWM – 130 × 48 × 52 mm, 5 V, PWM, approx. 90 g; strap / zip-tie mounting to the mother aircraft
  • • Single-lock SQ – same 130 × 48 × 52 mm, 5 V, PWM body with a quick-release interface; aircraft-side quick-release base sold separately
FlySpark Mothership drone release variant comparison – single-lock PWM vs single-lock SQ quick-release
FlySpark Mothership drone release variant comparison – single-lock PWM vs single-lock SQ quick-release

DEFENCE & MILITARY APPLICATIONS

For armed forces, paramilitary units, border and internal-security agencies, the Mothership release turns a heavy-lift drone into a carrier that places small drones, relays and sensors exactly where they are needed, without sending personnel forward.

  • • Mothership deployment of small ISR drones beyond their ground-launch range
  • • Communications relay: carry a small relay drone to altitude and release it over terrain masking
  • • Sensor, beacon and relay-node emplacement in valleys, forests and across water
  • • Perimeter-sensor seeding along borders and around temporary bases
  • • Marker and screening smoke from M18-class smoke canisters (size permitting)
  • • Search and rescue of personnel in mountains, jungle and maritime zones
  • • Emergency resupply of light items: tourniquet kits, radios, batteries and water purification tabs
  • • Decoy and reflector release for training and signature-management exercises
  • • ISR training, EOD and CBRN team training with inert training payload drops
  • • Integration of other authorised payloads by the end user in accordance with national law and procurement rules

CIVILIAN & COMMERCIAL APPLICATIONS

For rescue services, utilities, researchers and media teams, an air-launched child drone reaches places a ground-launched small drone cannot, while the carrier keeps a strong link overhead.

  • • Search and rescue: deploy a small search drone into ravines, collapsed structures or flooded areas
  • • Mountain and maritime rescue: extend the reach of small camera drones over water and ridgelines
  • • Bridge, dam, tower and power-line inspection with a small drone launched close to the structure
  • • Utility pilot-line drops for power-line stringing (light lines, size permitting)
  • • Disaster response: drop radios, flotation aids or first-aid pouches to stranded people
  • • Wildlife research: release small tracking or survey drones and sensor pods in remote habitat
  • • Agriculture: seed balls and bio-control capsule drops over hard-to-reach plots
  • • Film, events and sports coverage with an air-launched FPV-class camera drone
  • • University and R&D research into cooperative and multi-drone (mothership / swarm) operations
FlySpark Mothership release mount carrying a small FPV-class inspection drone to a high-voltage transmission tower for close-up utility inspection
FlySpark Mothership release mount carrying a small FPV-class inspection drone to a high-voltage transmission tower for close-up utility inspection
FlySpark Mothership drone release mount carrying a small FPV-class inspection drone toward a coastal bridge
FlySpark Mothership drone release mount carrying a small FPV-class inspection drone toward a coastal bridge

COMPARE THE FLYSPARK DROPPER RANGE

The Mothership release is the FlySpark option for carrying and air-launching a complete child drone. For dropping small payloads directly from a camera drone or FPV-class drone, or for releasing several payloads in sequence, choose one of the sibling droppers below.

  • • FlySpark ZD1-V3 – single-channel lightweight dropper for camera drones and FPV-class drones (LED, PWM and SQ)
  • • FlySpark ZD2-V3 – dual-channel dropper with two independently controlled release points
  • • FlySpark ZD4 / ZD6 / ZD8 – 4-, 6- and 8-channel multi-payload droppers for larger custom-built drones
  • • FlySpark XD2 / XD4 – pin-pull release droppers for light payloads on camera and FPV-class drones
  • • FlySpark M18SD – parallel-rack dropper for M18-class smoke canisters
  • • FlySpark ELRS-to-PWM output module – converts a CRSF / ELRS receiver signal into a PWM servo output for any dropper
FlySpark Mothership drone release mount rear three-quarter view showing the strap, cradle and latch lugs
FlySpark Mothership drone release mount rear three-quarter view showing the strap, cradle and latch lugs

STANDARD SUPPLY

  • • FlySpark Mothership single-lock release mount (PWM or SQ version as ordered)
  • • Integrated micro servo with 3-pin PWM lead
  • • Hook-and-loop mounting strap
  • • Quick-start wiring and set-up guide
  • • Aircraft-side quick-release base for SQ, child drone, mother aircraft and ELRS-to-PWM module sold separately

IMPORTANT USE NOTE

The FlySpark Mothership Drone Release Mount is supplied only to verified end users. The buyer is responsible for using lawful payloads, obtaining airspace permissions and complying with drone regulations and export controls. Release child drones and payloads only over a cleared area, never fly or release over people, and keep within the mother aircraft’s rated payload.

FREQUENTLY ASKED QUESTIONS

Missionskonfigurationen

Konfiguration (2)

Select your operational configuration. Pricing may vary — request a formal quote for deployment quantities.

Single-lock child-drone release with PWM trigger and strap / zip-tie mounting to the mother aircraft.

SKU: FSP-DRP-MOTHERSHIP-PWM

Unit Price (EUR, ab Werk)POAAvailable

Single-lock child-drone release with PWM trigger and quick-release interface; aircraft-side quick-release base sold separately.

SKU: FSP-DRP-MOTHERSHIP-SQ

Unit Price (EUR, ab Werk)POAAvailable

Aktive Konfiguration

FlySpark Mothership Release - Single-Lock PWM (130 × 48 × 52 mm, 5 V, approx. 90 g)

Single-lock child-drone release with PWM trigger and strap / zip-tie mounting to the mother aircraft.

POA

EUR · indikativ ab Werk

SKU: FSP-DRP-MOTHERSHIP-PWM

Konfigurationsmatrix

Alle Varianten vergleichen

Spezifikationen im direkten Vergleich – klicken Sie auf eine Spalte, um sie auszuwählen

Parameter
Unit Price (EUR, ab Werk)POAPOA
StockAvailableAvailable
SKUFSP-DRP-MOTHERSHIP-PWMFSP-DRP-MOTHERSHIP-SQ

Technical Data Sheet

System Specifications

32 parameters across 7 categories

Electrical & Control5 fields

Supply Voltage
5 V
Signal
PWM servo signal from flight controller or receiver
Connector
3-pin servo lead (signal, +5 V, ground)
Trigger
Radio switch or ground-control servo command on a spare PWM channel
CRSF / ELRS-only Aircraft
Use the FlySpark ELRS-to-PWM output module (sold separately)

Complete specification index

Häufig gestellte Fragen

Kauf von FlySpark Mothership Drone Release Mount | Child-Drone Air-Launch Dropper for 8-inch FPV-Class Drones, Single-Lock Servo Latch, 130×48×52 mm, 5 V PWM & ~90 g aus Deutschland

FlySpark exportiert FlySpark Mothership Drone Release Mount | Child-Drone Air-Launch Dropper for 8-inch FPV-Class Drones, Single-Lock Servo Latch, 130×48×52 mm, 5 V PWM & ~90 g nach Deutschland von unserem Standort in Gandhinagar, Indien. Die Systeme werden über die Luftfracht Indien → Europa-Route versendet, die übliche Transitzeit beträgt nach Dokumentenfreigabe 7–12 Tage. Angebote werden in EUR (EXW Gandhinagar; DAP/CIF auf Anfrage) erstellt, und jede Sendung enthält eine Handelsrechnung, eine Packliste und ein Ursprungszeugnis.

  • Lieferzeit: 3–6 Wochen ab Werk, zuzüglich 7–12 Tage Transportzeit nach Deutschland
  • Einfuhrzölle und Mehrwertsteuer/GST in Deutschland sind vom Käufer zu entrichten; wir geben korrekte HS-Codes und Werte an.
  • Zahlung: Banküberweisung (TT) oder Akkreditiv; 50 % Anzahlung, Restzahlung vor Versand
  • Ferninbetriebnahme, Bedienerschulung und Ersatzteilversorgung in Deutschland per Videoanruf und Kurier

HF- und Drohnenabwehrgeräte werden ausschließlich an autorisierte Endnutzer geliefert. Je nach den Bestimmungen Deutschland können eine Einfuhrgenehmigung und eine Endbenutzerbescheinigung (EUC) erforderlich sein – unser Exportteam bereitet die entsprechenden Dokumente vor dem Versand gemeinsam mit Ihnen vor.

Global export · local pricing

FlySpark Mothership Drone Release Mount | Child-Drone Air-Launch Dropper for 8-inch FPV-Class Drones, Single-Lock Servo Latch, 130×48×52 mm, 5 V PWM & ~90 g — priced in 15 country editions

FlySpark exports this system worldwide with end-user certification, dual-use classification, and destination-specific compliance. Open your country edition for indicative local pricing; the binding quote is issued on WhatsApp in your currency.

All export markets

Gleiche Kategorie

Verwandte Systeme

Einsatzbereit

Bereit für den Einsatz?

Kontaktieren Sie unser Verteidigungstechnik-Team für Großbestellungen, Anpassungen, Konformitätsdokumentation und Unterstützung bei der Feldeinsätze.