
FlySpark Mothership Drone Release Mount | Child-Drone Air-Launch Dropper for 8-inch FPV-Class Drones, Single-Lock Servo Latch, 130×48×52 mm, 5 V PWM & ~90 g
FlySpark Mothership Drone Release Mount | Child-Drone Air-Launch Dropper for 8-inch FPV-Class Drones, Single-Lock Servo Latch, 130×48×52 mm, 5 V PWM & ~90 g — 日本への輸出に対応。参考価格 価格はお問い合わせください(JPY、工場渡し)。正式見積もり、納期、エンドユーザー書類はWhatsAppで。
FlySpark mothership drone release: air-launch an 8-inch FPV-class child drone from a large carrier. 130×48×52 mm, ~90 g, 5 V PWM. India supply & export.
ご注文は営業デスクがWhatsAppでJPYの見積もりとともに確定します。
数量価格はお問い合わせください。価格と納期は WhatsApp でご案内します。
軍用規格の品質を保証
輸出規制に準拠した文書
24時間365日のエンジニアリングサポート
- flyspark
- flyspark-mothership
- mothership-drone
- mothership-drone-release
- child-drone-release
- drone-air-launch
- air-launched-drone
- drone-dropper
- drone-payload-dropper
- drone-payload-release
- payload-release-mount
- drone-release-mechanism
Key facts
At a glance
The FlySpark Mothership Release is a single-lock servo-latch mount that lets a large carrier multirotor air-launch an FPV-class child drone of 8 inches or smaller, or a payload of similar size. It measures 130 × 48 × 52 mm, weighs about 90 g and is triggered by a 5 V PWM signal over a 3-pin servo lead. It comes in strap-mount and quick-release versions.
| Child aircraft / payload | FPV-class drone of 8 inches or smaller, or similar-size payload |
|---|---|
| Mother aircraft | Large multirotors (enterprise hexacopters, heavy-lift quadcopters) with a spare 5 V PWM output |
| Latch | Single-lock servo latch |
| Dimensions (L × W × H) | 130 × 48 × 52 mm |
| Weight | Approx. 90 g (single-lock unit) |
| Supply voltage | 5 V from servo rail |
| Connector / signal | 3-pin servo lead (signal, +5 V, ground); PWM |
| Versions | Single-lock PWM (strap/zip-tie mount); single-lock SQ (quick-release interface, base sold separately) |
| Price | On request |
Use cases
- Air-launching a small FPV drone from a heavy-lift carrier to extend its reach
- Release of 8-inch-class payloads from enterprise multirotors
- Mothership / child-drone concept testing in R&D
Standards & references
- India Drone Rules, 2021 (G.S.R. 589(E)) — Both the carrier and the released child drone are unmanned aircraft; each must be registered and operated under the Rules.
Sources: FlySpark catalog data; FlySpark product page. Updated .
Intelligence Brief
ミッション概要
FlySpark Mothership Drone Release Mount is a single-lock child-drone air-launch dropper that lets a large carrier drone lift a smaller FPV-class drone of 8 inches or less, fly it to the work area and release it in flight. The 130 × 48 × 52 mm mount weighs approximately 90 g, runs on 5 V and opens its servo-driven latch on a standard PWM signal from the mother aircraft’s flight controller or receiver.

The Mothership release is part of the FlySpark UAV Payload Droppers & Release Systems range, supplied and supported in India by AnuShakti Infotech Pvt. Ltd., with export enquiries welcome from verified end users.
Small FPV-class drones are agile and inexpensive but limited in range, endurance and radio line of sight. Carrying one on a mothership saves the child drone’s battery for the task itself, lifts it above terrain masking and lets a single crew deploy it into valleys, over water, behind structures or far beyond its ground-launch range. The same mount can also release other payloads in the same size class, such as sensor pods, relay nodes, marker smoke canisters or rescue pouches.

WHY CHOOSE THE FLYSPARK MOTHERSHIP DRONE RELEASE
The mount is deliberately simple: one servo, one lock and one standard 3-pin PWM lead. There is no proprietary controller to integrate, so it works with almost any flight controller or receiver that can drive a servo, and with CRSF / ELRS-only aircraft through the FlySpark ELRS-to-PWM output module. At about 90 g it barely affects the carrier’s payload budget, leaving the lift margin for the child drone itself.
Two versions share the same body. The single-lock PWM version straps or zip-ties directly to the mother aircraft for a dedicated mothership airframe. The single-lock SQ version uses a quick-release interface so the same mount can be moved between carrier aircraft in seconds; the aircraft-side quick-release base is sold separately.

MOTHERSHIP DRONE RELEASE KEY FEATURES
- • Carries and air-releases an 8-inch-or-smaller FPV-class child drone
- • Also releases other payloads in the same size class
- • Single servo-driven lock for one clean release per sortie
- • Compact 130 × 48 × 52 mm body
- • Lightweight: approx. 90 g
- • 5 V supply from the servo rail
- • Standard PWM trigger from flight controller or receiver
- • Hook-and-loop strap and zip-tie mounting (PWM version)
- • Quick-release interface for fast aircraft swaps (SQ version)
- • Works with CRSF / ELRS-only aircraft via the ELRS-to-PWM module (sold separately)
- • Child drone keeps its own radio, video and flight controller
- • Hanger fit confirmed by FlySpark for the end user’s approved payload

HOW THE MOTHERSHIP RELEASE WORKS
The mount sits under the mother aircraft and its 3-pin lead plugs into a spare PWM output on the flight controller or receiver, which also supplies the 5 V servo rail. The pilot assigns a two-position switch, or a servo command from the ground control software, to that output. With the switch in the locked position the servo holds the latch closed around the child drone’s hanger point. Moving the switch opens the latch and the child drone drops clear of the carrier, after which the child pilot flies it on its own control and video link.
Before every mission, bench-test the latch with propellers removed, confirm the PWM endpoints, load the child drone and carry out a pull test on the latch.


COMPATIBLE AIRCRAFT & MOUNTING
Mother aircraft: large multirotors such as enterprise hexacopters and heavy-lift quadcopters with enough lift margin for the 90 g mount plus the child drone and its battery, a spare 5 V PWM servo output or receiver channel, and a flat underside or landing-gear rail for the strap or quick-release base.
Child aircraft: FPV-class drones of 8 inches or smaller, or other payloads in the same size class. Payload fit confirmed by FlySpark for the end user’s approved payload, including the hanger point that engages the latch.



MOTHERSHIP RELEASE VARIANTS
- • Single-lock PWM – 130 × 48 × 52 mm, 5 V, PWM, approx. 90 g; strap / zip-tie mounting to the mother aircraft
- • Single-lock SQ – same 130 × 48 × 52 mm, 5 V, PWM body with a quick-release interface; aircraft-side quick-release base sold separately

DEFENCE & MILITARY APPLICATIONS
For armed forces, paramilitary units, border and internal-security agencies, the Mothership release turns a heavy-lift drone into a carrier that places small drones, relays and sensors exactly where they are needed, without sending personnel forward.
- • Mothership deployment of small ISR drones beyond their ground-launch range
- • Communications relay: carry a small relay drone to altitude and release it over terrain masking
- • Sensor, beacon and relay-node emplacement in valleys, forests and across water
- • Perimeter-sensor seeding along borders and around temporary bases
- • Marker and screening smoke from M18-class smoke canisters (size permitting)
- • Search and rescue of personnel in mountains, jungle and maritime zones
- • Emergency resupply of light items: tourniquet kits, radios, batteries and water purification tabs
- • Decoy and reflector release for training and signature-management exercises
- • ISR training, EOD and CBRN team training with inert training payload drops
- • Integration of other authorised payloads by the end user in accordance with national law and procurement rules
CIVILIAN & COMMERCIAL APPLICATIONS
For rescue services, utilities, researchers and media teams, an air-launched child drone reaches places a ground-launched small drone cannot, while the carrier keeps a strong link overhead.
- • Search and rescue: deploy a small search drone into ravines, collapsed structures or flooded areas
- • Mountain and maritime rescue: extend the reach of small camera drones over water and ridgelines
- • Bridge, dam, tower and power-line inspection with a small drone launched close to the structure
- • Utility pilot-line drops for power-line stringing (light lines, size permitting)
- • Disaster response: drop radios, flotation aids or first-aid pouches to stranded people
- • Wildlife research: release small tracking or survey drones and sensor pods in remote habitat
- • Agriculture: seed balls and bio-control capsule drops over hard-to-reach plots
- • Film, events and sports coverage with an air-launched FPV-class camera drone
- • University and R&D research into cooperative and multi-drone (mothership / swarm) operations


COMPARE THE FLYSPARK DROPPER RANGE
The Mothership release is the FlySpark option for carrying and air-launching a complete child drone. For dropping small payloads directly from a camera drone or FPV-class drone, or for releasing several payloads in sequence, choose one of the sibling droppers below.
- • FlySpark ZD1-V3 – single-channel lightweight dropper for camera drones and FPV-class drones (LED, PWM and SQ)
- • FlySpark ZD2-V3 – dual-channel dropper with two independently controlled release points
- • FlySpark ZD4 / ZD6 / ZD8 – 4-, 6- and 8-channel multi-payload droppers for larger custom-built drones
- • FlySpark XD2 / XD4 – pin-pull release droppers for light payloads on camera and FPV-class drones
- • FlySpark M18SD – parallel-rack dropper for M18-class smoke canisters
- • FlySpark ELRS-to-PWM output module – converts a CRSF / ELRS receiver signal into a PWM servo output for any dropper

STANDARD SUPPLY
- • FlySpark Mothership single-lock release mount (PWM or SQ version as ordered)
- • Integrated micro servo with 3-pin PWM lead
- • Hook-and-loop mounting strap
- • Quick-start wiring and set-up guide
- • Aircraft-side quick-release base for SQ, child drone, mother aircraft and ELRS-to-PWM module sold separately
IMPORTANT USE NOTE
The FlySpark Mothership Drone Release Mount is supplied only to verified end users. The buyer is responsible for using lawful payloads, obtaining airspace permissions and complying with drone regulations and export controls. Release child drones and payloads only over a cleared area, never fly or release over people, and keep within the mother aircraft’s rated payload.
FREQUENTLY ASKED QUESTIONS
ミッション構成
構成 (2)
Select your operational configuration. Pricing may vary — request a formal quote for deployment quantities.
Single-lock child-drone release with PWM trigger and strap / zip-tie mounting to the mother aircraft. SKU: FSP-DRP-MOTHERSHIP-PWM | Unit Price (JPY, 工場渡し)POAAvailable | ||
Single-lock child-drone release with PWM trigger and quick-release interface; aircraft-side quick-release base sold separately. SKU: FSP-DRP-MOTHERSHIP-SQ | Unit Price (JPY, 工場渡し)POAAvailable |
アクティブ構成
FlySpark Mothership Release - Single-Lock PWM (130 × 48 × 52 mm, 5 V, approx. 90 g)
Single-lock child-drone release with PWM trigger and strap / zip-tie mounting to the mother aircraft.
POA
JPY · 参考 工場渡し
SKU: FSP-DRP-MOTHERSHIP-PWM
構成マトリックス
すべてのバリエーションを比較する
仕様を並べて表示するには、列をクリックして選択してください。
| Parameter | ||
|---|---|---|
| Unit Price (JPY, 工場渡し) | POA | POA |
| Stock | Available | Available |
| SKU | FSP-DRP-MOTHERSHIP-PWM | FSP-DRP-MOTHERSHIP-SQ |
Technical Data Sheet
System Specifications
32 parameters across 7 categories
settingsElectrical & Control5 fields
- Supply Voltage
- 5 V
- Signal
- PWM servo signal from flight controller or receiver
- Connector
- 3-pin servo lead (signal, +5 V, ground)
- Trigger
- Radio switch or ground-control servo command on a spare PWM channel
- CRSF / ELRS-only Aircraft
- Use the FlySpark ELRS-to-PWM output module (sold separately)
Complete specification index
よくある質問
public日本からFlySpark Mothership Drone Release Mount | Child-Drone Air-Launch Dropper for 8-inch FPV-Class Drones, Single-Lock Servo Latch, 130×48×52 mm, 5 V PWM & ~90 gを購入する
FlySparkは、インドのガンディナガルにある施設からFlySpark Mothership Drone Release Mount | Child-Drone Air-Launch Dropper for 8-inch FPV-Class Drones, Single-Lock Servo Latch, 130×48×52 mm, 5 V PWM & ~90 gを日本へ輸出しています。システムはインド → アジア太平洋航空貨物レーンで出荷され、書類手続き完了後、通常5~10日の輸送期間となります。見積もりはJPY(EXW ガンディナガル; DAP/CIF はご要望に応じて対応いたします)で発行され、すべての出荷には商業送り状、梱包明細書、原産地証明書が同梱されます。
- リードタイム:工場渡し価格3~6週間 、輸送期間5~10日 ( 日本まで)
- 日本における輸入関税およびVAT/GSTは購入者が負担します。当社は正確なHSコードと価格を申告します。
- 支払い方法:銀行振込(TT)または信用状。50%前払い、残金は発送前にお支払いください。
- ビデオ通話と宅配便による日本における遠隔試運転、オペレーター研修、スペアパーツサポート
verified_userRFおよび対UAS機器は、認可を受けたエンドユーザーのみに供給されます。日本の規制によっては、輸入許可証およびエンドユーザー証明書(EUC)が必要となる場合があります。弊社の輸出担当部署が、発送前に必要な書類をお客様と共に準備いたします。
Global export · local pricing
FlySpark Mothership Drone Release Mount | Child-Drone Air-Launch Dropper for 8-inch FPV-Class Drones, Single-Lock Servo Latch, 130×48×52 mm, 5 V PWM & ~90 g — priced in 15 country editions
FlySpark exports this system worldwide with end-user certification, dual-use classification, and destination-specific compliance. Open your country edition for indicative local pricing; the binding quote is issued on WhatsApp in your currency.
All export marketschevron_right| Market | Indicative price | Quote |
|---|---|---|
| India | INR | |
| United States | USD | Quote for United States → |
| United Kingdom | GBP | Quote for United Kingdom → |
| Germany | EUR | Quote for Germany → |
| France | EUR | Quote for France → |
| Ukraine | UAH | Quote for Ukraine → |
| United Arab Emirates | AED | Quote for United Arab Emirates → |
| Australia | AUD | |
| Brazil | BRL | |
| Canada | CAD | |
| Turkey | TRY | |
| Poland | PLN |
同じカテゴリー
関連システム





















