FlySpark QD82 Heavy-Lift Multi-Tube Drone Payload Dropper | 2/4/6/8-Tube Parallel Rack for Ø82 mm-Class Payloads, PWM & Remote Trigger, 5 V, Aluminium + Carbon Fibre & Single or Half-Load Salvo — available for export to United States. Indicative price Quote on request (USD, ex-works). Formal quote, lead time and end-user documentation on WhatsApp.
Base price — FlySpark QD82-2 Heavy-Lift Dropper - 2 Tubes (232 × 92 × 254 mm, approx. 1000 g)
POA
Excl. GST · Final pricing subject to configuration & quantity
FlySpark QD82 heavy-lift drone payload dropper: 2–8 tube rack for Ø82 mm-class payloads, PWM/remote, 5 V, single or salvo release. India supply & export.
The FlySpark QD82 is a heavy-lift parallel tube-rack payload dropper for large multirotors, holding 2, 4, 6 or 8 Ø82 mm-class payloads, one per tube. All variants are 232 mm long and 254 mm high, with width and weight growing from 92 mm / approx. 1000 g (2 tubes) to 378 mm / approx. 4000 g (8 tubes). It runs on 5 V, is triggered by a PWM servo signal or RC switch, and can release one tube or a half-load salvo per command; price is on request.
approx. 1000 / 2000 / 3000 / 4000 g for 2 / 4 / 6 / 8 tubes
Material
Aluminium alloy tubes and clamps, carbon-fibre base plate
Operating voltage
5 V
Trigger
PWM servo signal or remote-control switch
Release modes
Single tube, or half-load salvo (1 / 2 / 3 / 4 tubes per command)
Build options
PWM or SQ (quick-release)
Compatible aircraft
Matrice 300/350-class, heavy hexacopters, octocopters and custom heavy-lift frames
Mounting
User-fitted rack (not included)
Warranty
1 year manufacturing defect support
Price
On request
Use cases
Multiple marker or signal smoke drops per sortie for training
Search-and-rescue and disaster-relief drops of first-aid pouches and radios
Sensor, beacon and relay emplacement in hard-to-reach terrain
Utility pilot-line drops and extinguisher-ball drops where size fits
University and R&D payload-release research
Standards & references
Drone Rules, 2021 (Ministry of Civil Aviation, India) — Indian rules for drone operation; the catalog makes the buyer responsible for airspace permissions, and the added dropper and payload mass affects the aircraft's all-up weight.
FlySpark QD82 Heavy-Lift Multi-Tube Drone Payload Dropper is a parallel tube-rack release system for Ø82 mm-class payloads, built for large multirotors that must carry several payloads and place them one at a time or in salvos. Offered in 2-, 4-, 6- and 8-tube versions, the QD82 is made from aluminium alloy and carbon fibre, runs on 5 V and is triggered by a standard PWM servo signal or directly from the remote control.
FlySpark QD82 heavy-lift multi-tube drone dropper product overview videoFlySpark QD82 heavy-lift multi-tube drone dropper mounted under a large hexacopter over a training ground
The QD82 is part of the FlySpark UAV Payload Droppers & Release Systems range, supplied and supported in India by AnuShakti Infotech Pvt. Ltd. for defence, government security, public-safety and professional integrator customers, with export enquiries welcome from verified end users.
Every variant shares the same 232 mm length and 254 mm height; only the width grows with the number of tube pairs: 92 mm for the QD82-2, 187 mm for the QD82-4, 282 mm for the QD82-6 and 378 mm for the QD82-8, at approximately 1000, 2000, 3000 and 4000 g. Each command releases either a single tube or half of the loaded tubes, and the user fits the dropper to their own mounting rack so it can be adapted to almost any suitable heavy-lift airframe.
FlySpark QD82 heavy-lift multi-tube drone dropper specification sheet – 2 to 8 tubes, 5 V, PWM / remote, 1000–4000 g
WHY CHOOSE THE QD82 HEAVY-LIFT DRONE DROPPER
The QD82 is designed for missions where one payload per sortie is not enough. Its parallel tubes keep each Ø82 mm-class payload upright, guided and separated, so the aircraft can make several precise drops, or a half-load salvo, without landing to reload. The aluminium-alloy tubes and carbon-fibre base plate keep the rack stiff under load while holding dropper weight to about 500 g per tube.
Integration is deliberately simple: one 5 V supply and one PWM channel from the flight controller or receiver, or a switch on the RC transmitter. Because the mounting rack is user-fitted, integrators can match the dropper to Matrice 300 / 350-class enterprise airframes, heavy hexacopters or custom octocopters without waiting for an airframe-specific bracket.
• Aluminium alloy tubes and clamps with carbon-fibre base plate
• PWM servo signal or remote-control trigger
• 5 V release electronics
• Single release or half-load salvo per command
• User-fitted mounting rack for any suitable heavy-lift airframe
• PWM and SQ (quick-release) build options
• Payload fit confirmed by FlySpark for the end user’s approved payload
FlySpark QD82 multi-tube drone payload dropper held by a gloved technician on a workbench, showing real-world size of the 232 × 254 mm tube rackFlySpark QD82-6 multi-tube drone payload dropper front view with six aluminium tubes in a 2 × 3 rack
HOW IT WORKS: TRIGGER AND RELEASE
The QD82 release electronics take a standard PWM servo signal from a spare flight-controller or receiver output, so a drop can be commanded from a transmitter switch, a ground-station payload button or an autopilot mission step. Each tube has its own retaining release at the base; when commanded, the payload exits downward under gravity, clear of the tube.
FlySpark QD82 drone dropper trigger and wiring diagram – PWM servo signal or remote control, 5 V supply
Two release modes are available. In single release, each command lets go of one tube for precise, sequential placement. In half-load salvo, each command releases half of the total tubes, so two commands empty the rack: 1 tube per command on the QD82-2, 2 on the QD82-4, 3 on the QD82-6 and 4 on the QD82-8. Channel assignment, failsafe behaviour and release sequence are configured and bench-tested at commissioning.
FlySpark QD82 multi-tube dropper release modes – single release or half-load salvo per command
COMPATIBLE AIRCRAFT & MOUNTING
The QD82 is intended for large multirotors with genuine heavy-lift capacity: Matrice 300 / 350-class enterprise drones, heavy hexacopters, octocopters and custom heavy-lift frames. Add the dropper weight (1000 to 4000 g) and the full payload mass to the take-off weight and stay within the aircraft maker’s limit. The dropper is supplied without an airframe-specific bracket; fit it on your own rack or payload rails, centred under the centre of gravity, with clearance below the tube mouths for clean separation.
FlySpark QD82 heavy-lift dropper mounting and aircraft compatibility – user-fitted rack under large multirotorsFlySpark QD82 heavy-lift tube-rack dropper mounted on rails under a large hexacopter during pre-flight checks at a field site
VARIANTS
• QD82-2 – 2 tubes (2 × 1), 232 × 92 × 254 mm, approx. 1000 g
• QD82-4 – 4 tubes (2 × 2), 232 × 187 × 254 mm, approx. 2000 g
• QD82-6 – 6 tubes (2 × 3), 232 × 282 × 254 mm, approx. 3000 g
• QD82-8 – 8 tubes (2 × 4), 232 × 378 × 254 mm, approx. 4000 g
All variants are listed in PWM and SQ (quick-release) builds; FlySpark confirms the build and mounting interface with each order.
FlySpark QD82 drone dropper side view showing aluminium tube clamps and carbon-fibre electronics enclosure
DEFENCE & MILITARY APPLICATIONS
For armed forces, paramilitary units and government security agencies, the QD82 turns a heavy-lift multirotor into a multi-drop delivery platform for signalling, training and support payloads, placing several items per sortie without exposing personnel.
• Marker and screening smoke deployment for training and signalling
• Signalling and ground-marking drops for air–ground coordination
• Inert training payload drops on ranges and in exercises
• Sensor, beacon and radio-relay emplacement in hard-to-reach terrain
• Emergency resupply: tourniquet kits, batteries, radios and water purification tabs
• Decoy and reflector release for training scenarios
• Perimeter-sensor seeding along borders and installations
• EOD and CBRN team training with inert payloads
• Search and rescue of personnel in mountains, jungle and water
• Integration of other authorised payloads by the end user in accordance with national law and procurement rules
CIVILIAN & COMMERCIAL APPLICATIONS
For rescue services, utilities, agriculture and research teams, the QD82 delivers several payloads per flight to places that are slow, costly or dangerous to reach on foot or by boat.
• Search and rescue drops of radios, flotation aids and medical kits
• Mountain and maritime rescue support from heavy-lift drones
• Flood and disaster-relief delivery of first-aid pouches and supplies
• Utility pilot-line drops for power-line stringing
• Firefighting extinguisher-ball drops where size fits the tubes
• Agriculture: seed balls and bio-control capsules
• Wildlife research, tagging and sampling-kit delivery
• Fishing bait drops from heavy-lift multirotors
• Events and controlled demonstration drops
• University and R&D payload-release research
FlySpark QD82 heavy-lift drone dropper releasing a first-aid kit over a snowy mountain slope during a mountain rescue missionFlySpark QD82 heavy-lift drone dropper releasing orange first-aid pouches over a flood zone
COMPARE THE FLYSPARK DROPPER RANGE
The QD82 is the heavy-lift option in the FlySpark dropper range, sized for Ø82 mm-class payloads and large multirotors. For lighter payloads or smaller aircraft, the SD, WD, LD and ZD series offer clip-on and multi-channel droppers for FPV-class drones, camera drones and mid-size multirotors.
• FlySpark QD60 – parallel tube-rack dropper for Ø60 mm-class cylindrical payloads, 2 to 8 tubes, for large multirotors
• FlySpark SDA / SDC series – multi-channel CRSF / light-sensor dropper for compact ovoid payloads with dual safety lock, 2 to 8 channels
• FlySpark ZD1 – single-channel clip-on dropper for FPV-class drones and camera drones
• FlySpark QD82 – heavy-lift 2 to 8-tube rack for Ø82 mm-class payloads on large multirotors
FlySpark QD82-6 parallel tube-rack drone dropper high three-quarter view showing six open payload tubes
STANDARD SUPPLY:
• FlySpark QD82 tube-rack dropper in the selected variant (2, 4, 6 or 8 tubes)
• 5 V release electronics with PWM signal lead
• Aluminium-alloy tubes with clamps on carbon-fibre base plate
• Wiring and channel-setup guidance
• Commissioning and integration support from FlySpark
• Mounting rack not included (user-fitted)
IMPORTANT USE NOTE:
The QD82 is supplied only to verified end users. The buyer is responsible for using only lawful payloads, obtaining all airspace permissions and complying with export-control and end-use rules. Payload fit is confirmed by FlySpark for the end user’s approved payload. Never fly over people, keep the take-off mass within the aircraft maker’s limit and test the release on the ground before every mission.
FREQUENTLY ASKED QUESTIONS:
Q: What is a heavy-lift drone payload dropper?
A: A heavy-lift drone payload dropper is a release system mounted under a large multirotor that holds one or more payloads and lets them go on command. The FlySpark QD82 holds its payloads in parallel vertical tubes and releases them downward from the tube base when it receives a PWM or remote-control signal.
Q: What is the FlySpark QD82?
A: The FlySpark QD82 is a heavy-lift, multi-tube parallel-rack drone dropper for Ø82 mm-class payloads. It is built from aluminium alloy and carbon fibre, runs on 5 V, is triggered by a PWM servo signal or remote control, and is offered in 2-, 4-, 6- and 8-tube versions (QD82-2, QD82-4, QD82-6 and QD82-8).
Q: What sizes and weights are the QD82 variants?
A: QD82-2: 232 × 92 × 254 mm, approx. 1000 g. QD82-4: 232 × 187 × 254 mm, approx. 2000 g. QD82-6: 232 × 282 × 254 mm, approx. 3000 g. QD82-8: 232 × 378 × 254 mm, approx. 4000 g. Weights are for the dropper without payload.
Q: What payloads does the QD82 carry?
A: Each tube carries one Ø82 mm-class payload, so the rack holds 2, 4, 6 or 8 payloads depending on the variant. Typical lawful payloads include marker or screening smoke, inert training cylinders, sensors, beacons and compact emergency supply packs. Payload fit is confirmed by FlySpark for the end user’s approved payload.
Q: How is the QD82 triggered?
A: By a standard PWM servo signal from a spare flight-controller or receiver channel, or directly by the operator through a switch on the RC transmitter. The release electronics run on 5 V supplied by the aircraft.
Q: What are the release modes?
A: The QD82 supports single release, where each command lets go of one tube, and half-load salvo, where each command releases half of the total tubes (for example 3 tubes per command on the QD82-6). The mode and sequence are configured and bench-tested at commissioning.
Q: Which drones is the QD82 compatible with?
A: It is designed for large multirotors with real heavy-lift capacity, such as Matrice 300 / 350-class enterprise airframes and heavy hexacopters and octocopters. The take-off mass including the dropper and full payload must stay inside the aircraft maker’s limit.
Q: How is the QD82 mounted on the drone?
A: The QD82 is supplied without an airframe-specific bracket; the user fits it to their own mounting rack or payload rails under the aircraft belly. FlySpark can advise on rack design, centre-of-gravity placement and clearance below the tube mouths.
Q: What is the QD82 made of?
A: The tubes and clamps are aluminium alloy and the base plate and electronics enclosure are carbon fibre, giving a rigid, lightweight structure for heavy payload loads.
Q: What voltage does the QD82 need?
A: 5 V, typically from the aircraft BEC or a regulated power module, with a common ground to the PWM signal source.
Q: Which QD82 variant should I choose?
A: Choose the tube count to match your aircraft’s spare payload capacity and mission: the QD82-2 (approx. 1000 g) suits smaller heavy-lift frames or single-point drops, while the QD82-8 (approx. 4000 g) suits large octocopters that need eight payload positions per sortie.
Q: What does SQ mean in the build options?
A: The QD82 range is listed in PWM and SQ (quick-release) builds. FlySpark confirms the exact build and the mounting interface with your order.
Q: What is the QD82 drone dropper price in India?
A: Price is on request because each order is configured for the variant, build option and integration support required. Contact FlySpark on WhatsApp or email for a quotation in INR or for export.
Q: What is the lead time, and do you export?
A: Lead time is confirmed with the quotation. FlySpark supplies across India and handles export enquiries subject to end-user verification, export-control rules and the documentation required by the buyer’s country.
Q: Who can buy the QD82?
A: The QD82 is supplied only to verified end users such as defence and government agencies, public-safety organisations and professional integrators, after end-use details are provided.
Q: Can other payloads be integrated on the QD82?
A: FlySpark supplies the QD82 as a payload release system for lawful payloads. Integration of any other authorised payload is the responsibility of the end user, must comply with national law and procurement rules, and may require export and end-use licensing.
Q: Can the QD82 be used for search and rescue?
A: Yes. Rescue teams use multi-tube droppers to deliver radios, flotation aids, first-aid pouches and marker smoke to people stranded in water, on hillsides or in flood zones where size and weight fit the tubes.
Q: How do I check that the QD82 is ready before flight?
A: Confirm the tubes are seated in their clamps, the 5 V supply and PWM lead are secure, the release responds on the bench from the assigned channel, and the loaded aircraft hovers stably before the first operational drop.
Q: How does the QD82 compare with other FlySpark droppers?
A: The QD82 is the heavy-lift tube rack for Ø82 mm-class payloads. The QD60 covers Ø60 mm-class payloads in a lighter rack, while the SD, WD and ZD series are lighter clip-on droppers for FPV-class drones and smaller multirotors.
Q: What warranty is included?
A: Warranty covers manufacturing defects for 1 year under approved use and normal operating conditions. Damage from crashes, overload, wrong wiring or unauthorised modification may not be covered.
Mission configurations
Configuration (4)
Select your operational configuration. Pricing may vary — request a formal quote for deployment quantities.
2-tube (2 × 1) parallel rack for Ø82 mm-class payloads, 5 V, PWM / remote trigger, single or half-load salvo release.
SKU: FSP-DRP-QD82-2
Unit Price (USD, ex-works)POAAvailable
4-tube (2 × 2) parallel rack for Ø82 mm-class payloads, 5 V, PWM / remote trigger, single or half-load salvo release.
SKU: FSP-DRP-QD82-4
Unit Price (USD, ex-works)POAAvailable
6-tube (2 × 3) parallel rack for Ø82 mm-class payloads, 5 V, PWM / remote trigger, single or half-load salvo release.
SKU: FSP-DRP-QD82-6
Unit Price (USD, ex-works)POAAvailable
8-tube (2 × 4) parallel rack for Ø82 mm-class payloads, 5 V, PWM / remote trigger, single or half-load salvo release.
Payload fit confirmed by FlySpark for the end user’s approved payload
settingsDimensions & Weight 6
QD82-2 Size (L × W × H)
232 × 92 × 254mm
QD82-4 Size (L × W × H)
232 × 187 × 254mm
QD82-6 Size (L × W × H)
232 × 282 × 254mm
QD82-8 Size (L × W × H)
232 × 378 × 254mm
Weight (2 / 4 / 6 / 8 tubes)
Approx. 1000 / 2000 / 3000 / 4000g
Material
Aluminium alloy + carbon fibre
settingsElectrical & Trigger 4
Operating Voltage
5V
Trigger Signal
PWM servo signal / remote control
Signal Source
Spare flight-controller or receiver PWM channel, or RC transmitter switch
Build Options
PWM / SQ (quick-release) — confirmed with order
settingsRelease System 4
Release Mode
Single release or half-load salvo (half of total tubes per command)
Release per Command (salvo)
1 / 2 / 3 / 4 tubes for QD82-2 / -4 / -6 / -8
Release Direction
Downward from the tube base
Configuration
Mode, channel and failsafe set and bench-tested at commissioning
settingsCompatibility & Mounting 4
Compatible Aircraft
Large multirotors (Matrice 300 / 350-class, heavy hexacopters and octocopters)
Mounting
User fits own mounting rack
Accessories Sold Separately
Airframe mounting rack / payload rails
Take-off Mass
Dropper + payload must stay within the aircraft maker’s limit
settingsSafety & Compliance 6
Lawful use only
Supplied only to verified end users for lawful payloads
Payload rule
Payload fit confirmed by FlySpark for the end user’s approved payload
Airspace & export
Buyer responsible for airspace permissions and export-control compliance
Flight safety
Never fly over people; ground-test the release before each mission
Warranty
1 Year manufacturing defect support under approved use and normal operating conditions
Supplier
FlySpark / AnuShakti Infotech Pvt. Ltd.
Frequently asked questions
What size payloads does the QD82 take?
Ø82 mm-class payloads, one per tube. FlySpark confirms payload fit for the end user's approved payload before supply.
How heavy is the QD82?
Approximately 1000 g (2 tubes), 2000 g (4 tubes), 3000 g (6 tubes) or 4000 g (8 tubes), before payload. Dropper plus payload must stay within the aircraft maker's take-off mass limit.
How is the QD82 triggered?
With a standard PWM servo signal from a spare flight-controller or receiver output, or an RC transmitter switch. The release electronics run on 5 V.
Can the QD82 drop several payloads at once?
Yes. In half-load salvo mode each command releases half the tubes (1, 2, 3 or 4 for the 2-, 4-, 6- and 8-tube versions). Single-release mode drops one tube per command.
Is a mounting rack included?
No. The QD82 is fitted by the user to their own mounting rack or payload rails, which are sold separately.
Can FlySpark export the FlySpark QD82 Heavy-Lift Multi-Tube Drone Payload Dropper internationally?
Yes. The FlySpark QD82 Heavy-Lift Multi-Tube Drone Payload Dropper ships to defense, security, and critical-infrastructure buyers in our 10 export markets and other authorized destinations, with full export documentation — end-user certification, dual-use classification, and destination-specific compliance handled before dispatch.
What configurations of the FlySpark QD82 Heavy-Lift Multi-Tube Drone Payload Dropper are available?
The FlySpark QD82 Heavy-Lift Multi-Tube Drone Payload Dropper is offered in 4 configurations so you can match range, payload, and integration requirements. Custom builds are available for volume orders.
Do you provide technical support and documentation for the FlySpark QD82 Heavy-Lift Multi-Tube Drone Payload Dropper?
Every FlySpark QD82 Heavy-Lift Multi-Tube Drone Payload Dropper order includes datasheets, integration guidance, and compliance paperwork. Our engineering team supports commissioning, spares, and field deployment.
How do I request a quote for the FlySpark QD82 Heavy-Lift Multi-Tube Drone Payload Dropper?
Pricing for the FlySpark QD82 Heavy-Lift Multi-Tube Drone Payload Dropper is quoted on request. Contact the export desk with your quantity and destination for a formal quote that includes export documentation, compliance handling, and freight.
Can FlySpark export FlySpark QD82 Heavy-Lift Multi-Tube Drone Payload Dropper | 2/4/6/8-Tube Parallel Rack for Ø82 mm-Class Payloads, PWM & Remote Trigger, 5 V, Aluminium + Carbon Fibre & Single or Half-Load Salvo to United States?
Yes. FlySpark ships to United States on the India → North America air freight lane; transit is typically 8–14 days. Counter-UAS and RF items require an authorized end user and may need an import permit — we handle the export documentation with you.
What does FlySpark QD82 Heavy-Lift Multi-Tube Drone Payload Dropper | 2/4/6/8-Tube Parallel Rack for Ø82 mm-Class Payloads, PWM & Remote Trigger, 5 V, Aluminium + Carbon Fibre & Single or Half-Load Salvo cost in United States?
The indicative price is Quote on request (USD, ex-works India, converted from INR on 2026-11-20). Freight, insurance and United States import duties are quoted separately; the formal offer is issued in USD on WhatsApp or email.
How long does delivery to United States take?
Standard configurations ship in 3–6 weeks after order confirmation; air freight to United States then takes 8–14 days. Custom builds and larger quantities are scheduled at quotation.
publicBuying FlySpark QD82 Heavy-Lift Multi-Tube Drone Payload Dropper | 2/4/6/8-Tube Parallel Rack for Ø82 mm-Class Payloads, PWM & Remote Trigger, 5 V, Aluminium + Carbon Fibre & Single or Half-Load Salvo from United States
FlySpark exports FlySpark QD82 Heavy-Lift Multi-Tube Drone Payload Dropper | 2/4/6/8-Tube Parallel Rack for Ø82 mm-Class Payloads, PWM & Remote Trigger, 5 V, Aluminium + Carbon Fibre & Single or Half-Load Salvo to United States from our facility in Gandhinagar, India. Systems ship on the India → North America air freight lane with a typical transit time of 8–14 days once documentation clears. Quotes are issued in USD (EXW Gandhinagar; DAP/CIF on request), and every shipment includes a commercial invoice, packing list and certificate of origin.
Lead time: 3–6 weeks ex-works, plus 8–14 days transit to United States
Import duty and VAT/GST in United States are payable by the buyer; we declare accurate HS codes and values
Payment: bank transfer (TT) or letter of credit; 50% advance, balance before dispatch
Remote commissioning, operator training and spares support in United States via video call and courier
verified_userRF and counter-UAS equipment is supplied to authorized end users only. Depending on United States regulations an import permit and an end-user certificate (EUC) may be required — our export desk prepares the paperwork with you before dispatch.
Global export · local pricing
FlySpark QD82 Heavy-Lift Multi-Tube Drone Payload Dropper | 2/4/6/8-Tube Parallel Rack for Ø82 mm-Class Payloads, PWM & Remote Trigger, 5 V, Aluminium + Carbon Fibre & Single or Half-Load Salvo — priced in 15 country editions
FlySpark exports this system worldwide with end-user certification, dual-use classification, and destination-specific compliance. Open your country edition for indicative local pricing; the binding quote is issued on WhatsApp in your currency.