
FlySpark SMOKER2 Drone Smoke Generator Module | Twin-Canister Smoke-Trail Release for DJI Mavic / Air & FPV-Class Drones, Light-Sensor, PWM & Quick-Release, 5V & 91g
FlySpark SMOKER2 Drone Smoke Generator Module | Twin-Canister Smoke-Trail Release for DJI Mavic / Air & FPV-Class Drones, Light-Sensor, PWM & Quick-Release, 5V & 91g — 日本への輸出に対応。参考価格 価格はお問い合わせください(JPY、工場渡し)。正式見積もり、納期、エンドユーザー書類はWhatsAppで。
FlySpark SMOKER2 drone smoke generator: twin-canister smoke-trail module, 110×48×73 mm, 5 V, approx. 91 g, LED/PWM/SQ versions. India supply & export.
ご注文は営業デスクがWhatsAppでJPYの見積もりとともに確定します。
数量価格はお問い合わせください。価格と納期は WhatsApp でご案内します。
軍用規格の品質を保証
輸出規制に準拠した文書
24時間365日のエンジニアリングサポート
- flyspark
- smoker2
- flyspark-smoker2
- drone-smoke-generator
- drone-smoke-generators
- drone-smoke-module
- smoke-generator-for-drone
- drone-smoke-trail
- smoke-trail-module
- drone-smoke-marker
- smoke-marker-drone
- drone-signal-smoke
Key facts
At a glance
The FlySpark SMOKER2 is a compact smoke-generator module that carries two smoke canisters side by side under a small drone to lay an airborne smoke trail for signalling, marking, wind indication and training. It measures 110 × 48 × 73 mm, weighs about 91 g with strap (LED version) and runs on 5 V. The LED version is triggered by an optical sensor over the auxiliary light of DJI Mavic and Air drones with no wiring; the PWM and SQ versions take a PWM signal on FPV-class and custom drones. Price is on request.
| Function | Airborne smoke trail module (twin canister) |
|---|---|
| Dimensions (L × W × H) | 110 × 48 × 73 mm |
| Weight | approx. 91 g including strap (LED version) |
| Operating voltage | 5 V |
| Versions | SMOKER2-LED, SMOKER2-PWM, SMOKER2-SQ (quick-release) |
| LED version trigger | Optical sensor over the drone's bottom auxiliary light; no wiring |
| LED version aircraft | DJI Air 2 / Air 3, DJI Mavic 2 / Mavic 3 / Mavic 4 |
| PWM / SQ trigger | PWM signal from flight controller or receiver |
| Housing interfaces | USB-C port, power switch, two-pin canister connectors |
| Mounting | Strap under the aircraft (LED/PWM); quick-release mount (SQ) |
| Smoke colour and duration | Determined by the canister fitted; canisters sold separately |
| Price | On request |
Use cases
- Wind indication at height for drone and helicopter operations
- Signalling and marking for search-and-rescue teams
- Airshow and training smoke trails
- Marking positions for ground teams
Standards & references
- Drone Rules, 2021 (Ministry of Civil Aviation, India) — Indian rules for drone operation; adding the module changes take-off weight, and the catalog makes the buyer responsible for airspace permissions.
Sources: FlySpark catalog data (product description and specifications); Drone Rules, 2021 — Ministry of Civil Aviation. Updated .
Intelligence Brief
ミッション概要
FlySpark SMOKER2 Drone Smoke Generator is a compact twin-canister smoke-trail release module that turns a camera drone or FPV-class quadcopter into an airborne signalling and marking tool. It measures 110 × 48 × 73 mm, runs at 5 V and weighs approximately 91 g including the strap (LED version), so it can be carried by small drones without a dedicated payload bay.

The SMOKER2 is part of the FlySpark UAV Payload Droppers & Release Systems range, supplied and supported in India by AnuShakti Infotech Pvt. Ltd., with export enquiries welcome.
Two smoke canisters sit side by side in curved cradles that conform to the canister body, under a light, rigid housing with a foam mounting pad. Three versions cover the common aircraft types: SMOKER2-LED for DJI Mavic 2/3/4 and DJI Air 2/3 class drones, triggered by an optical sensor over the drone’s bottom auxiliary light with no wiring; SMOKER2-PWM for FPV-class and custom-built drones with a spare PWM output; and SMOKER2-SQ, the PWM version on a quick-release mount for fast turnaround between sorties.

WHY CHOOSE THE SMOKER2 DRONE SMOKE GENERATOR
Ground-launched smoke shows wind only at ground level and cannot follow a moving search. A drone smoke module puts the marker exactly where it is needed, at the height that matters, and can be moved within seconds. The SMOKER2 does this in a light, self-contained package: the LED version needs no wiring or firmware changes on DJI camera drones, and the PWM and SQ versions plug into the transmitter switch logic pilots already use on FPV-class and custom-built aircraft.

- SMOKER2 SMOKE MODULE KEY FEATURES:
- • Dedicated drone smoke generator for smoke-trail signalling and marking
- • Twin-canister layout with curved cradles that conform to the canister body
- • Compact 110 × 48 × 73 mm envelope
- • Approx. 91 g including strap (LED version)
- • 5 V operation on all versions
- • LED version: light-sensor trigger from the drone’s bottom auxiliary light, no wiring
- • Fits DJI Mavic 2/3/4 and DJI Air 2/3 class camera drones (LED version)
- • PWM version: triggered from a spare flight-controller or receiver PWM output
- • SQ version: quick-release mounting for fast canister turnaround
- • Foam mounting pad protects the aircraft belly
- • White two-pin connectors on the housing for canister connection
- • Lightweight, reliable, simple to fit


HOW IT WORKS: TRIGGER AND SMOKE RELEASE
On the LED version, the optical sensor window in the foam pad is taped over the drone’s bottom auxiliary light. Switching that light on from the flight app tells the SMOKER2 to start smoke output, so it works on aircraft that have no payload port. On the PWM and SQ versions, a spare PWM output on the flight controller or receiver is assigned to a transmitter switch, and flipping the switch starts smoke output in flight. The canisters stay on the module while they burn and stop when spent; the module is then reloaded on the ground.

COMPATIBLE AIRCRAFT & MOUNTING
The LED version straps flat under the body of DJI Mavic 2, Mavic 3, Mavic 4, Air 2 and Air 3 class folding drones, with the foam pad protecting the belly. The PWM version straps or zip-ties under the bottom plate of FPV-class and custom-built drones. The SQ version clicks onto an aircraft-side quick-release mount (sold separately), so the module can be swapped in seconds. Always check the take-off weight margin and centre of gravity with the module and canisters fitted.



SMOKER2 VERSIONS: LED, PWM AND SQ
- • SMOKER2-LED – light-sensor trigger for DJI Mavic 2/3/4 and Air 2/3; 110 × 48 × 73 mm; 5 V; approx. 91 g including strap
- • SMOKER2-PWM – PWM trigger for FPV-class and custom-built drones; 110 × 48 × 73 mm; 5 V
- • SMOKER2-SQ – PWM trigger with quick-release mounting; 110 × 48 × 73 mm; 5 V; aircraft-side mount sold separately

DEFENCE & MILITARY APPLICATIONS
For armed forces, paramilitary units and government security agencies, the SMOKER2 provides airborne marker smoke for training, signalling and wind indication without committing a ground team to the marking point.
- • Marker and screening smoke for training exercises and range control
- • Visual signalling between ground teams and aircraft
- • Landing-zone and drop-zone marking for helicopters and resupply drops
- • Wind indication for parachute, paramotor and drone operations
- • Search and rescue of personnel: marking a located casualty for ground teams
- • Emergency resupply support: marking the drop point before releasing tourniquet kits, batteries or radios
- • Decoy and visual-cue training for observation and camouflage drills
- • EOD and CBRN team training: marking cordons and simulated hazard areas
- • Perimeter and boundary marking during exercises
- • Integration of other authorised payloads by the end user in accordance with national law and procurement rules
CIVILIAN & COMMERCIAL APPLICATIONS
For rescue services, utilities, event organisers and researchers, a smoke trail from a drone is the quickest way to show a position or the wind to everyone on site.
- • Search and rescue: marking a person in water, forest or mountain terrain for ground and boat teams
- • Mountain and maritime rescue: showing wind and drift before a hoist or boat approach
- • Firefighting and disaster response: marking access routes and helispot locations
- • Utility line work: showing wind on site before pilot-line drops for power-line stringing
- • Airshows, sports events and film production: coloured smoke trails and visual effects
- • Agriculture and spraying operations: checking wind drift before a spray run
- • Wildlife and environmental research: visualising airflow and plume behaviour
- • University and drone-school training: visual flight-path tracking and demonstration


COMPARE THE FLYSPARK DROPPER RANGE
The SMOKER2 is the dedicated smoke-trail module in the FlySpark payload release range: it keeps the canisters on the aircraft and lays a continuous trail. When the payload itself must be released, a FlySpark dropper is the better fit.
- • FlySpark ZD1-V3 – single-channel payload dropper, 50 × 50 × 70 mm, approx. 50 g, LED / PWM / SQ
- • FlySpark M18ZD1-V1 – single-channel dropper for M18-class smoke canisters, 48 × 48 × 88 mm, approx. 77 g
- • FlySpark ZD2-V3 – dual-channel dropper with two independently controlled loads, 56–75 g
- • FlySpark XD2-V2 – pin-pull dual-channel dropper for DJI Mavic 3 class drones, 110–125 g
- • FlySpark ZD4 – four-channel CRSF dropper for FPV-class and custom-built drones, approx. 120 g
- • FlySpark M18SD series – 2, 4, 6 or 8-channel parallel racks for M18-class smoke canisters

- STANDARD SUPPLY:
- • FlySpark SMOKER2 smoke generator module (LED, PWM or SQ version as ordered)
- • Mounting strap (LED version)
- • Setup guide for light-sensor placement or PWM channel assignment
- • Remote setup support from FlySpark
- • Smoke canisters not included (consumables)
- • SQ version: aircraft-side quick-release mount sold separately
IMPORTANT USE NOTE: The SMOKER2 is supplied only to verified end users. The buyer is responsible for using lawful, approved smoke canisters, for obtaining airspace and site permissions, and for complying with export-control rules. Never fly over people. Smoke canisters become hot and can ignite dry vegetation: keep clear of crowds, buildings and fuel, and follow the canister maker’s safety instructions. Payload fit is confirmed by FlySpark for the end user’s approved payload.
FREQUENTLY ASKED QUESTIONS:
ミッション構成
構成 (3)
Select your operational configuration. Pricing may vary — request a formal quote for deployment quantities.
Light-sensor version for DJI Mavic 2/3/4 and Air 2/3: optical sensor over the bottom auxiliary light, no wiring, 5 V, approx. 91 g including strap. SKU: FSP-DRP-SMOKER2-LED | Unit Price (JPY, 工場渡し)POAAvailable | ||
PWM version for FPV-class and custom-built drones: triggered from a spare flight-controller or receiver PWM output, 5 V. Weight confirmed with quotation. SKU: FSP-DRP-SMOKER2-PWM | Unit Price (JPY, 工場渡し)POAAvailable | ||
Quick-release PWM version for FPV-class and custom-built drones, 5 V. Aircraft-side quick-release mount sold separately. Weight confirmed with quotation. SKU: FSP-DRP-SMOKER2-SQ | Unit Price (JPY, 工場渡し)POAAvailable |
アクティブ構成
FlySpark SMOKER2-LED – Light-Sensor Trigger for DJI Mavic/Air (110 × 48 × 73 mm, approx. 91 g incl. strap)
Light-sensor version for DJI Mavic 2/3/4 and Air 2/3: optical sensor over the bottom auxiliary light, no wiring, 5 V, approx. 91 g including strap.
POA
JPY · 参考 工場渡し
SKU: FSP-DRP-SMOKER2-LED
構成マトリックス
すべてのバリエーションを比較する
仕様を並べて表示するには、列をクリックして選択してください。
| Parameter | |||
|---|---|---|---|
| Unit Price (JPY, 工場渡し) | POA | POA | POA |
| Stock | Available | Available | Available |
| SKU | FSP-DRP-SMOKER2-LED | FSP-DRP-SMOKER2-PWM | FSP-DRP-SMOKER2-SQ |
Technical Data Sheet
System Specifications
37 parameters across 7 categories
settingsGeneral7 fields
- SKU
- FSP-DRP-SMOKER2-LED
- Product Type
- Drone smoke generator / smoke-trail release module
- Model Name
- FlySpark SMOKER2 Drone Smoke Generator
- Model Codes
- SMOKER2-LED, SMOKER2-PWM, SMOKER2-SQ
- Product Category
- UAV Payload Droppers & Release Systems
- Price
- On request
- Supplier / Integration Support
- FlySpark / AnuShakti Infotech Pvt. Ltd.
Complete specification index
よくある質問
public日本からFlySpark SMOKER2 Drone Smoke Generator Module | Twin-Canister Smoke-Trail Release for DJI Mavic / Air & FPV-Class Drones, Light-Sensor, PWM & Quick-Release, 5V & 91gを購入する
FlySparkは、インドのガンディナガルにある施設からFlySpark SMOKER2 Drone Smoke Generator Module | Twin-Canister Smoke-Trail Release for DJI Mavic / Air & FPV-Class Drones, Light-Sensor, PWM & Quick-Release, 5V & 91gを日本へ輸出しています。システムはインド → アジア太平洋航空貨物レーンで出荷され、書類手続き完了後、通常5~10日の輸送期間となります。見積もりはJPY(EXW ガンディナガル; DAP/CIF はご要望に応じて対応いたします)で発行され、すべての出荷には商業送り状、梱包明細書、原産地証明書が同梱されます。
- リードタイム:工場渡し価格3~6週間 、輸送期間5~10日 ( 日本まで)
- 日本における輸入関税およびVAT/GSTは購入者が負担します。当社は正確なHSコードと価格を申告します。
- 支払い方法:銀行振込(TT)または信用状。50%前払い、残金は発送前にお支払いください。
- ビデオ通話と宅配便による日本における遠隔試運転、オペレーター研修、スペアパーツサポート
verified_userRFおよび対UAS機器は、認可を受けたエンドユーザーのみに供給されます。日本の規制によっては、輸入許可証およびエンドユーザー証明書(EUC)が必要となる場合があります。弊社の輸出担当部署が、発送前に必要な書類をお客様と共に準備いたします。
Global export · local pricing
FlySpark SMOKER2 Drone Smoke Generator Module | Twin-Canister Smoke-Trail Release for DJI Mavic / Air & FPV-Class Drones, Light-Sensor, PWM & Quick-Release, 5V & 91g — priced in 15 country editions
FlySpark exports this system worldwide with end-user certification, dual-use classification, and destination-specific compliance. Open your country edition for indicative local pricing; the binding quote is issued on WhatsApp in your currency.
All export marketschevron_right| Market | Indicative price | Quote |
|---|---|---|
| India | INR | |
| United States | USD | Quote for United States → |
| United Kingdom | GBP | Quote for United Kingdom → |
| Germany | EUR | Quote for Germany → |
| France | EUR | Quote for France → |
| Ukraine | UAH | Quote for Ukraine → |
| United Arab Emirates | AED | Quote for United Arab Emirates → |
| Australia | AUD | |
| Brazil | BRL | |
| Canada | CAD | |
| Turkey | TRY | |
| Poland | PLN |
同じカテゴリー
関連システム





















