FlySpark SMOKER2 Drone Smoke Generator Module | Twin-Canister Smoke-Trail Release for DJI Mavic / Air & FPV-Class Drones, Light-Sensor, PWM & Quick-Release, 5V & 91g — available for export to Australia. Indicative price Quote on request (AUD, ex-works). Formal quote, lead time and end-user documentation on WhatsApp.
Base price — FlySpark SMOKER2-LED – Light-Sensor Trigger for DJI Mavic/Air (110 × 48 × 73 mm, approx. 91 g incl. strap)
POA
Excl. GST · Final pricing subject to configuration & quantity
The FlySpark SMOKER2 is a compact smoke-generator module that carries two smoke canisters side by side under a small drone to lay an airborne smoke trail for signalling, marking, wind indication and training. It measures 110 × 48 × 73 mm, weighs about 91 g with strap (LED version) and runs on 5 V. The LED version is triggered by an optical sensor over the auxiliary light of DJI Mavic and Air drones with no wiring; the PWM and SQ versions take a PWM signal on FPV-class and custom drones. Price is on request.
FlySpark SMOKER2 Drone Smoke Generator is a compact twin-canister smoke-trail release module that turns a camera drone or FPV-class quadcopter into an airborne signalling and marking tool. It measures 110 × 48 × 73 mm, runs at 5 V and weighs approximately 91 g including the strap (LED version), so it can be carried by small drones without a dedicated payload bay.
FlySpark SMOKER2 drone smoke generator product overview videoFlySpark SMOKER2 drone smoke generator strapped under a folding camera drone, laying an orange smoke trail for wind indication over a training field
The SMOKER2 is part of the FlySpark UAV Payload Droppers & Release Systems range, supplied and supported in India by AnuShakti Infotech Pvt. Ltd., with export enquiries welcome.
Two smoke canisters sit side by side in curved cradles that conform to the canister body, under a light, rigid housing with a foam mounting pad. Three versions cover the common aircraft types: SMOKER2-LED for DJI Mavic 2/3/4 and DJI Air 2/3 class drones, triggered by an optical sensor over the drone’s bottom auxiliary light with no wiring; SMOKER2-PWM for FPV-class and custom-built drones with a spare PWM output; and SMOKER2-SQ, the PWM version on a quick-release mount for fast turnaround between sorties.
Ground-launched smoke shows wind only at ground level and cannot follow a moving search. A drone smoke module puts the marker exactly where it is needed, at the height that matters, and can be moved within seconds. The SMOKER2 does this in a light, self-contained package: the LED version needs no wiring or firmware changes on DJI camera drones, and the PWM and SQ versions plug into the transmitter switch logic pilots already use on FPV-class and custom-built aircraft.
FlySpark SMOKER2 drone smoke generator dimensions drawing – 110 × 48 × 73 mm (L × W × H)
SMOKER2 SMOKE MODULE KEY FEATURES:
• Dedicated drone smoke generator for smoke-trail signalling and marking
• Twin-canister layout with curved cradles that conform to the canister body
• Compact 110 × 48 × 73 mm envelope
• Approx. 91 g including strap (LED version)
• 5 V operation on all versions
• LED version: light-sensor trigger from the drone’s bottom auxiliary light, no wiring
• Fits DJI Mavic 2/3/4 and DJI Air 2/3 class camera drones (LED version)
• PWM version: triggered from a spare flight-controller or receiver PWM output
• SQ version: quick-release mounting for fast canister turnaround
• Foam mounting pad protects the aircraft belly
• White two-pin connectors on the housing for canister connection
• Lightweight, reliable, simple to fit
FlySpark SMOKER2 drone smoke generator front view – twin canisters, side connectors and foam mounting padFlySpark SMOKER2 drone smoke generator close-up of the white two-pin canister connectors, USB-C port and power switch beside the twin magenta-capped smoke canisters
HOW IT WORKS: TRIGGER AND SMOKE RELEASE
On the LED version, the optical sensor window in the foam pad is taped over the drone’s bottom auxiliary light. Switching that light on from the flight app tells the SMOKER2 to start smoke output, so it works on aircraft that have no payload port. On the PWM and SQ versions, a spare PWM output on the flight controller or receiver is assigned to a transmitter switch, and flipping the switch starts smoke output in flight. The canisters stay on the module while they burn and stop when spent; the module is then reloaded on the ground.
FlySpark SMOKER2 smoke module trigger options – light sensor (LED) vs PWM vs SQ quick-release
COMPATIBLE AIRCRAFT & MOUNTING
The LED version straps flat under the body of DJI Mavic 2, Mavic 3, Mavic 4, Air 2 and Air 3 class folding drones, with the foam pad protecting the belly. The PWM version straps or zip-ties under the bottom plate of FPV-class and custom-built drones. The SQ version clicks onto an aircraft-side quick-release mount (sold separately), so the module can be swapped in seconds. Always check the take-off weight margin and centre of gravity with the module and canisters fitted.
FlySpark SMOKER2 drone smoke generator mounting and compatibility – DJI Mavic / Air, FPV-class and quick-releaseFlySpark SMOKER2-LED drone smoke generator strapped under a DJI Mavic / Air class camera drone during pre-flight checks on a field case, with spare smoke canisters readyFlySpark SMOKER2-PWM smoke module under an FPV-class quadcopter laying a green signal smoke trail over hills during a search-and-rescue exercise
SMOKER2 VERSIONS: LED, PWM AND SQ
• SMOKER2-LED – light-sensor trigger for DJI Mavic 2/3/4 and Air 2/3; 110 × 48 × 73 mm; 5 V; approx. 91 g including strap
• SMOKER2-PWM – PWM trigger for FPV-class and custom-built drones; 110 × 48 × 73 mm; 5 V
• SMOKER2-SQ – PWM trigger with quick-release mounting; 110 × 48 × 73 mm; 5 V; aircraft-side mount sold separately
FlySpark SMOKER2-LED, SMOKER2-PWM and SMOKER2-SQ drone smoke generator versions compared
DEFENCE & MILITARY APPLICATIONS
For armed forces, paramilitary units and government security agencies, the SMOKER2 provides airborne marker smoke for training, signalling and wind indication without committing a ground team to the marking point.
• Marker and screening smoke for training exercises and range control
• Visual signalling between ground teams and aircraft
• Landing-zone and drop-zone marking for helicopters and resupply drops
• Wind indication for parachute, paramotor and drone operations
• Search and rescue of personnel: marking a located casualty for ground teams
• Emergency resupply support: marking the drop point before releasing tourniquet kits, batteries or radios
• Decoy and visual-cue training for observation and camouflage drills
• EOD and CBRN team training: marking cordons and simulated hazard areas
• Perimeter and boundary marking during exercises
• Integration of other authorised payloads by the end user in accordance with national law and procurement rules
CIVILIAN & COMMERCIAL APPLICATIONS
For rescue services, utilities, event organisers and researchers, a smoke trail from a drone is the quickest way to show a position or the wind to everyone on site.
• Search and rescue: marking a person in water, forest or mountain terrain for ground and boat teams
• Mountain and maritime rescue: showing wind and drift before a hoist or boat approach
• Firefighting and disaster response: marking access routes and helispot locations
• Utility line work: showing wind on site before pilot-line drops for power-line stringing
• Airshows, sports events and film production: coloured smoke trails and visual effects
• Agriculture and spraying operations: checking wind drift before a spray run
• Wildlife and environmental research: visualising airflow and plume behaviour
• University and drone-school training: visual flight-path tracking and demonstration
FlySpark SMOKER2 drone smoke generator laying red marker smoke over a snow slope to guide a mountain rescue team to a casualty positionFlySpark SMOKER2 drone smoke generator under a camera drone marking a position with orange smoke during flood-rescue training
COMPARE THE FLYSPARK DROPPER RANGE
The SMOKER2 is the dedicated smoke-trail module in the FlySpark payload release range: it keeps the canisters on the aircraft and lays a continuous trail. When the payload itself must be released, a FlySpark dropper is the better fit.
• FlySpark M18ZD1-V1 – single-channel dropper for M18-class smoke canisters, 48 × 48 × 88 mm, approx. 77 g
• FlySpark ZD2-V3 – dual-channel dropper with two independently controlled loads, 56–75 g
• FlySpark XD2-V2 – pin-pull dual-channel dropper for DJI Mavic 3 class drones, 110–125 g
• FlySpark ZD4 – four-channel CRSF dropper for FPV-class and custom-built drones, approx. 120 g
• FlySpark M18SD series – 2, 4, 6 or 8-channel parallel racks for M18-class smoke canisters
FlySpark SMOKER2 drone smoke generator three-quarter view – light-sensor window in the foam pad, USB-C port and power switch
STANDARD SUPPLY:
• FlySpark SMOKER2 smoke generator module (LED, PWM or SQ version as ordered)
• Mounting strap (LED version)
• Setup guide for light-sensor placement or PWM channel assignment
• Remote setup support from FlySpark
• Smoke canisters not included (consumables)
• SQ version: aircraft-side quick-release mount sold separately
IMPORTANT USE NOTE:
The SMOKER2 is supplied only to verified end users. The buyer is responsible for using lawful, approved smoke canisters, for obtaining airspace and site permissions, and for complying with export-control rules. Never fly over people. Smoke canisters become hot and can ignite dry vegetation: keep clear of crowds, buildings and fuel, and follow the canister maker’s safety instructions. Payload fit is confirmed by FlySpark for the end user’s approved payload.
FREQUENTLY ASKED QUESTIONS:
Q: What is a drone smoke generator?
A: A drone smoke generator is a small module carried under a drone that releases coloured smoke from a canister on command. The smoke trail is used for signalling, marking a location, showing wind direction and speed, and for display or training flights.
Q: What is the FlySpark SMOKER2?
A: The FlySpark SMOKER2 is a compact twin-canister drone smoke generator measuring 110 × 48 × 73 mm. It runs at 5 V, weighs approximately 91 g including the strap (LED version), and is offered in LED light-sensor, PWM and SQ quick-release versions.
Q: Which drones does the SMOKER2-LED fit?
A: The LED version is intended for DJI Mavic 2, Mavic 3 and Mavic 4 and DJI Air 2 and Air 3 class folding camera drones. It straps under the drone body and needs no wiring to the aircraft.
Q: How does the light-sensor (LED) trigger work?
A: The optical sensor window in the foam pad is taped over the drone’s bottom auxiliary light. When the pilot switches that light on from the flight app, the SMOKER2 detects the change and activates smoke output. No firmware change or wiring is needed.
Q: Which drones does the SMOKER2-PWM fit?
A: The PWM version is for FPV-class and custom-built drones whose flight controller or receiver has a spare PWM output. The output is assigned to a transmitter switch, which then starts smoke output in flight.
Q: What is the SMOKER2-SQ version?
A: SQ is the quick-release version for PWM aircraft. It is triggered by the same PWM signal, but mounts on a quick-release plate so the module can be clicked on and off between sorties. The aircraft-side quick-release mount is sold separately.
Q: What are the dimensions and weight?
A: Overall size is 110 × 48 × 73 mm. Weight is approximately 91 g including the strap for the LED version; weights for the PWM and SQ versions are confirmed with the quotation.
Q: What voltage does the SMOKER2 use?
A: All versions operate at 5 V. The PWM and SQ versions take their PWM command from the aircraft at 5 V logic; the LED version is self-contained and needs no connection to the aircraft.
Q: How many smoke canisters does it carry?
A: The SMOKER2 is a twin-canister layout: two canisters sit side by side in curved cradles that conform to the canister body. Canister fit is confirmed by FlySpark for the end user’s approved canister.
Q: Are smoke canisters included?
A: No. Smoke canisters are consumables and are not included. FlySpark confirms payload fit for the end user’s approved canister type and helps source compatible canisters where local rules allow.
Q: What colours of smoke can be used?
A: Colour depends on the canister fitted, not on the module. Orange, red, green, yellow, white and pink signal or display canisters are common; choose a colour that contrasts with the terrain and sky.
Q: What is a drone smoke generator used for?
A: Typical uses are search-and-rescue location marking, landing-zone and drop-zone marking, wind indication for parachute, paramotor and drone operations, training-range signalling, airshow and event smoke trails, and visual tracking during research flights.
Q: Can the SMOKER2 be used for defence and security training?
A: Yes, for marker and screening smoke, signalling, landing-zone marking, wind indication and training exercises. It is supplied only to verified end users, and all use must follow national law and range or airspace permissions.
Q: Can it carry anything other than smoke canisters?
A: The SMOKER2 is designed as a smoke generator. For dropping other payloads, FlySpark offers dedicated payload droppers and release systems. Integration of any other authorised payload is the end user’s responsibility in accordance with national law and procurement rules.
Q: Will it affect flight time and handling?
A: Any underslung payload reduces flight time and changes the centre of gravity. Check the aircraft’s take-off weight margin with the module and canisters fitted, and do a short hover test before the mission.
Q: Is it safe to use near people or buildings?
A: Smoke canisters become hot and can start fires in dry vegetation. Never fly over people, keep clear of buildings and crowds, and follow the canister maker’s safety instructions and local rules.
Q: What is the SMOKER2 drone smoke generator price in India?
A: Price is on request because it depends on the version, quantity and canister support needed. Contact FlySpark on WhatsApp or email for a quotation in INR or for export.
Q: What is the lead time, and do you export?
A: Lead time is confirmed with the quotation. FlySpark supplies across India and handles export enquiries subject to end-user verification and applicable export-control rules.
Q: How does the SMOKER2 compare with other FlySpark droppers?
A: The SMOKER2 is a dedicated smoke-trail module that keeps the canisters on the aircraft while they burn. Payload droppers such as the ZD1-V3, ZD2-V3 and M18ZD1-V1 release the payload itself instead.
Q: Does FlySpark provide setup support?
A: Yes. FlySpark / AnuShakti Infotech Pvt. Ltd. supports version selection, mounting, PWM channel setup, light-sensor placement, canister fit checks and operator training.
Q: What warranty is included?
A: Warranty covers manufacturing defects for 1 year under approved use and normal operating conditions. Heat damage from canisters, crash damage, water ingress and unauthorised modification may not be covered.
Mission configurations
Configuration (3)
Select your operational configuration. Pricing may vary — request a formal quote for deployment quantities.
Light-sensor version for DJI Mavic 2/3/4 and Air 2/3: optical sensor over the bottom auxiliary light, no wiring, 5 V, approx. 91 g including strap.
SKU: FSP-DRP-SMOKER2-LED
Unit Price (AUD, ex-works)POAAvailable
PWM version for FPV-class and custom-built drones: triggered from a spare flight-controller or receiver PWM output, 5 V. Weight confirmed with quotation.
SKU: FSP-DRP-SMOKER2-PWM
Unit Price (AUD, ex-works)POAAvailable
Quick-release PWM version for FPV-class and custom-built drones, 5 V. Aircraft-side quick-release mount sold separately. Weight confirmed with quotation.
SKU: FSP-DRP-SMOKER2-SQ
Unit Price (AUD, ex-works)POAAvailable
Active configuration
FlySpark SMOKER2-LED – Light-Sensor Trigger for DJI Mavic/Air (110 × 48 × 73 mm, approx. 91 g incl. strap)
Light-sensor version for DJI Mavic 2/3/4 and Air 2/3: optical sensor over the bottom auxiliary light, no wiring, 5 V, approx. 91 g including strap.
POA
AUD · indicative ex-works
SKU: FSP-DRP-SMOKER2-LED
Configuration matrix
Compare all variants
Side-by-side specifications — click a column to select
Approx. 91g including strap (LED version); PWM / SQ confirmed with quotation
Canister Layout
Twin canister, side by side
Canister Cradle
Curved cradle that conforms to the canister body
Mounting Pad
Foam pad on the aircraft side
Construction
Lightweight, high-reliability design
settingsElectrical & Trigger 6
Operating Voltage
5V
Trigger Signal
PWM / light sensor
SMOKER2-LED Trigger
Optical light sensor taped over the drone’s bottom auxiliary light; no wiring
SMOKER2-PWM Trigger
PWM signal from flight controller or receiver
SMOKER2-SQ Trigger
PWM signal, quick-release version
Housing Interfaces
USB-C port, power switch, two-pin canister connectors (as shown)
settingsCompatible Aircraft 4
SMOKER2-LED
DJI Air 2 / Air 3, DJI Mavic 2 / Mavic 3 / Mavic 4
SMOKER2-PWM
PWM-signal aircraft: FPV-class drones and custom-built camera drones
SMOKER2-SQ
PWM-signal aircraft: FPV-class drones and custom-built camera drones
General Fit
Small drones such as FPV-class and camera drones
settingsMounting & Accessories 4
LED / PWM Mounting
Strap (zip-tie) under the aircraft body
SQ Mounting
Quick-release mount
Sold Separately
Aircraft-side quick-release mount (SQ); smoke canisters
Payload Fit
Payload fit confirmed by FlySpark for the end user’s approved payload
settingsOperation 4
Function
Airborne smoke trail for signalling, marking, wind indication, airshows and training
Smoke Colour
Determined by the canister fitted
Smoke Duration
Determined by the canister fitted
Reload
On the ground between sorties
settingsSafety & Compliance 6
Supply
Verified end users only
Lawful use only
Buyer responsible for lawful payloads, airspace permissions and export controls
Flight safety
Never fly over people; check take-off weight and centre of gravity
Fire safety
Canisters become hot; avoid dry vegetation, crowds, buildings and fuel
Warranty
1 Year manufacturing defect support under approved use and normal operating conditions
Supplier
FlySpark / AnuShakti Infotech Pvt. Ltd.
Frequently asked questions
Which drones does the SMOKER2 fit?
The SMOKER2-LED fits DJI Air 2/3 and Mavic 2/3/4 class drones and needs no wiring. The SMOKER2-PWM and SMOKER2-SQ suit FPV-class and custom-built drones with a spare PWM output.
How is the SMOKER2-LED triggered on a DJI drone?
An optical light sensor is taped over the drone's bottom auxiliary light; switching that light from the flight app triggers the module, with no wiring or firmware changes.
How long does the smoke last?
Smoke colour and duration depend on the canister fitted. Canisters are sold separately and reloaded on the ground between sorties.
How much does the SMOKER2 weigh?
About 91 g including strap for the LED version; PWM and SQ weights are confirmed with the quotation. The unit measures 110 × 48 × 73 mm.
What safety precautions apply?
Canisters become hot, so avoid dry vegetation, crowds, buildings and fuel. Never fly over people, and check take-off weight and centre of gravity after fitting.
Can FlySpark export the FlySpark SMOKER2 Drone Smoke Generator Module internationally?
Yes. The FlySpark SMOKER2 Drone Smoke Generator Module ships to defense, security, and critical-infrastructure buyers in our 10 export markets and other authorized destinations, with full export documentation — end-user certification, dual-use classification, and destination-specific compliance handled before dispatch.
What configurations of the FlySpark SMOKER2 Drone Smoke Generator Module are available?
The FlySpark SMOKER2 Drone Smoke Generator Module is offered in 3 configurations so you can match range, payload, and integration requirements. Custom builds are available for volume orders.
Do you provide technical support and documentation for the FlySpark SMOKER2 Drone Smoke Generator Module?
Every FlySpark SMOKER2 Drone Smoke Generator Module order includes datasheets, integration guidance, and compliance paperwork. Our engineering team supports commissioning, spares, and field deployment.
How do I request a quote for the FlySpark SMOKER2 Drone Smoke Generator Module?
Pricing for the FlySpark SMOKER2 Drone Smoke Generator Module is quoted on request. Contact the export desk with your quantity and destination for a formal quote that includes export documentation, compliance handling, and freight.
Can FlySpark export FlySpark SMOKER2 Drone Smoke Generator Module | Twin-Canister Smoke-Trail Release for DJI Mavic / Air & FPV-Class Drones, Light-Sensor, PWM & Quick-Release, 5V & 91g to Australia?
Yes. FlySpark ships to Australia on the India → Asia-Pacific air freight lane; transit is typically 5–10 days. Counter-UAS and RF items require an authorized end user and may need an import permit — we handle the export documentation with you.
What does FlySpark SMOKER2 Drone Smoke Generator Module | Twin-Canister Smoke-Trail Release for DJI Mavic / Air & FPV-Class Drones, Light-Sensor, PWM & Quick-Release, 5V & 91g cost in Australia?
The indicative price is Quote on request (AUD, ex-works India, converted from INR on 2026-11-20). Freight, insurance and Australia import duties are quoted separately; the formal offer is issued in AUD on WhatsApp or email.
How long does delivery to Australia take?
Standard configurations ship in 3–6 weeks after order confirmation; air freight to Australia then takes 5–10 days. Custom builds and larger quantities are scheduled at quotation.
publicBuying FlySpark SMOKER2 Drone Smoke Generator Module | Twin-Canister Smoke-Trail Release for DJI Mavic / Air & FPV-Class Drones, Light-Sensor, PWM & Quick-Release, 5V & 91g from Australia
FlySpark exports FlySpark SMOKER2 Drone Smoke Generator Module | Twin-Canister Smoke-Trail Release for DJI Mavic / Air & FPV-Class Drones, Light-Sensor, PWM & Quick-Release, 5V & 91g to Australia from our facility in Gandhinagar, India. Systems ship on the India → Asia-Pacific air freight lane with a typical transit time of 5–10 days once documentation clears. Quotes are issued in AUD (EXW Gandhinagar; DAP/CIF on request), and every shipment includes a commercial invoice, packing list and certificate of origin.
Lead time: 3–6 weeks ex-works, plus 5–10 days transit to Australia
Import duty and VAT/GST in Australia are payable by the buyer; we declare accurate HS codes and values
Payment: bank transfer (TT) or letter of credit; 50% advance, balance before dispatch
Remote commissioning, operator training and spares support in Australia via video call and courier
verified_userRF and counter-UAS equipment is supplied to authorized end users only. Depending on Australia regulations an import permit and an end-user certificate (EUC) may be required — our export desk prepares the paperwork with you before dispatch.
Global export · local pricing
FlySpark SMOKER2 Drone Smoke Generator Module | Twin-Canister Smoke-Trail Release for DJI Mavic / Air & FPV-Class Drones, Light-Sensor, PWM & Quick-Release, 5V & 91g — priced in 15 country editions
FlySpark exports this system worldwide with end-user certification, dual-use classification, and destination-specific compliance. Open your country edition for indicative local pricing; the binding quote is issued on WhatsApp in your currency.