FlySpark M18ZD1 Single-Channel Drone Smoke Canister Dropper | M18-Class Canister, 48×48×88mm, 5V, PWM / Light-Sensor Trigger, DJI Air & Mavic & Quick-Release Versions — disponible à l’export vers France. Prix indicatif Prix sur demande (EUR, départ usine). Devis ferme, délai et documentation utilisateur final sur WhatsApp.
Prix de base — FlySpark M18ZD1-LED-V1 - Light-Sensor, DJI Air / Mavic (48×48×88mm, approx. 77g incl. strap)
POA
Hors TVA · Prix final sujet à la configuration et à la quantité
FlySpark M18ZD1 drone smoke canister dropper: single-channel, 48×48×88mm, 5V, light-sensor or PWM trigger for DJI Mavic/Air & FPV-class drones. India & export.
The FlySpark M18ZD1 is a single-channel drone dropper that carries and releases one M18-class smoke canister for marking and signalling. Its body measures 48 × 48 × 88 mm and runs on 5 V. It comes in three versions: a light-sensor trigger for DJI Air 2/3 and Mavic 2/3/4 (about 77 g with strap), a PWM trigger for FPV-class and custom drones, and a PWM version with a quick-release mount.
Light sensor over the bottom auxiliary light, no wiring / DJI Air 2, Air 3, Mavic 2, 3, 4
PWM-V1 trigger / aircraft
PWM servo signal from FC or receiver / FPV-class and custom drones
SQ-V1
PWM trigger with quick-release mount (aircraft-side module to order)
Price
On request
Use cases
Dropping marker or signalling smoke from DJI Air / Mavic drones
Smoke-canister release from FPV-class and custom drones via PWM
Training and exercise scenarios needing visual markers
Search-and-rescue position marking
Standards & references
India Drone Rules, 2021 (G.S.R. 589(E)) — Rule 28 allows dangerous goods on unmanned aircraft only in compliance with the Aircraft (Carriage of Dangerous Goods) Rules, 2003, which is relevant when carrying pyrotechnic smoke canisters.
FlySpark M18ZD1 Single-Channel Drone Smoke Canister Dropper is a compact drone payload release unit that carries one M18-class smoke canister under a small multirotor and releases it on command. The dropper body measures just 48 × 48 × 88mm, runs on 5V and weighs approx. 77g in the LED version including its strap, so it fits under DJI Air and Mavic camera drones as well as FPV-class and custom-built aircraft.
FlySpark M18ZD1 smoke canister drone dropper product overview videoFlySpark M18ZD1 smoke canister dropper strapped under a DJI Mavic-style camera drone over a field training ground
The M18ZD1 is part of the FlySpark UAV Payload Droppers & Release Systems range, supplied and supported in India by AnuShakti Infotech Pvt. Ltd., with export enquiries welcome. It is offered in three versions: M18ZD1-LED-V1 with a light-sensor trigger for DJI Air 2 / Air 3 and Mavic 2 / 3 / 4, M18ZD1-PWM-V1 for PWM-signal aircraft, and M18ZD1-SQ-V1 with a quick-release mount.
A curved cradle conforms to the canister body and a side-mounted servo latch holds it securely in flight. A foam saddle on top seats firmly against the aircraft belly, and the unit is fixed with a strap or zip-ties, with no drilling or permanent modification to the drone.
Smoke is still the fastest way to show a ground team, boat crew or helicopter pilot exactly where to go and which way the wind is blowing. The M18ZD1 lets a small drone place that marker precisely, from a safe stand-off, in seconds. Because the LED version is triggered by the drone’s own auxiliary light, it can be fitted to a standard DJI Air or Mavic in minutes without opening the aircraft or adding any wiring.
FlySpark M18ZD1 single-channel drone dropper front three-quarter view with USB-C port, slide switch and side servo latch
For FPV-class and custom-built aircraft, the PWM version connects to a spare servo output so the release can be mapped to any transmitter switch, and the SQ version adds a quick-release mount so a crew can swap or reload droppers quickly between sorties.
M18ZD1 KEY FEATURES
• Single-channel release for one M18-class smoke canister
• Compact 48 × 48 × 88mm dropper body
• Approx. 77g (LED version, including strap)
• 5V operation on all versions
• LED version: light-sensor trigger from the drone’s bottom auxiliary light, no wiring
• PWM version: servo signal from flight controller or receiver
• SQ version: quick-release mount for fast swaps and reloads
• Curved cradle conforms to the canister for a secure hold in flight
• Foam saddle on top seats firmly against the aircraft belly
• Side-mounted servo latch for a clean, single-action release
• USB-C port and on/off slide switch on the housing
• Strap / zip-tie mounting, no tools or drilling needed
• Fits DJI Air 2 / Air 3 and Mavic 2 / 3 / 4 (LED version)
FlySpark M18ZD1 drone dropper dimensions drawing – 48 × 48 × 88 mm dropper body
HOW THE M18ZD1 DROPPER WORKS
The M18ZD1 holds the canister in its curved cradle with a single servo-driven latch. When the release command arrives, the latch opens and the canister falls clear in one action.
• LED-V1: the optical sensor is taped over the drone’s bottom auxiliary light; switching the light on from the flight app triggers the release
• PWM-V1: a 5V PWM servo signal from the flight controller or receiver drives the latch
• SQ-V1: the same PWM release, with the dropper fitted on a quick-release mount
FlySpark M18ZD1 trigger options – LED light-sensor, PWM servo signal and SQ quick-release release flowFlySpark M18ZD1 dropper single-action release of a plain marker cylinder from a Mavic-class drone over a desert training area
COMPATIBLE AIRCRAFT & MOUNTING
The LED version is listed for DJI Air 2 / Air 3 and DJI Mavic 2 / 3 / 4 folding camera drones and needs no electrical connection to the aircraft. The PWM and SQ versions suit FPV-class quadcopters and custom-built multirotors with a free PWM output. Always confirm that the aircraft’s take-off weight and balance remain within limits with the canister fitted.
FlySpark M18ZD1 drone payload dropper empty with curved foam-lined cradle, foam saddle and mounting strapFlySpark M18ZD1 LED dropper strapped under a DJI Mavic/Air-class camera drone during pre-flight checks on a rugged equipment caseFlySpark M18ZD1 mounting and aircraft compatibility – DJI Air / Mavic, FPV-class and custom-built dronesFlySpark M18ZD1 dropper under a custom multirotor over hills, with green marker smoke on a landing zone in the background
For armed forces, paramilitary, police and government security units, the M18ZD1 is a light, quick-fit aerial smoke marking tool for signalling, marking and training tasks.
• Marker and screening smoke for landing zones, drop zones and rally points
• Signalling and wind-direction indication for helicopter and UAV recovery
• Inert training payload drops for UAV operator and payload-release training
• Marking search positions during search and rescue of personnel
• Emergency resupply marking for tourniquet kits, batteries, radios and water purification tabs
• Sensor, beacon and relay emplacement drills on light airframes
• Decoy and reflector release trials
• EOD and CBRN team training: marking hazard areas and safe lanes
• Perimeter-sensor seeding exercises
• Integration of other authorised payloads by the end user in accordance with national law and procurement rules
CIVILIAN & COMMERCIAL APPLICATIONS
For rescue services, utilities, research teams and professional integrators, the M18ZD1 turns a small drone into a precise aerial smoke marker and light payload release system.
• Search and rescue: marking a casualty or missing-person location for ground teams
• Mountain and maritime rescue: smoke marking for boats and helicopters
• Utility work: light pilot-line drops for power-line stringing
• Firefighting: wind-direction smoke for pilots and incident commanders
• Agriculture: seed balls and bio-control capsules of suitable size
• Fishing bait drops
• Wildlife research: marker and small sensor drops
• Events and film production: coloured smoke effects where permitted
• University and institute research on drone payload release
FlySpark M18ZD1 drone smoke canister dropper over a snowy mountain rescue site with red marker smoke guiding the ground teamFlySpark M18ZD1 smoke canister dropper on a Mavic-style drone during a maritime rescue exercise with orange marker smoke on the water
COMPARE THE FLYSPARK DROPPER RANGE
The M18ZD1 is the single-channel choice for M18-class smoke canisters. For more payloads per sortie, a multi-channel or parallel-rack dropper fits better, while the SMOKER2 produces smoke without releasing anything from the aircraft.
• FlySpark ZD1-V3 – single-channel dropper with a curved cradle, 50 × 50 × 70mm, approx. 50g
• FlySpark ZD2-V3 – dual-channel dropper with two independently controlled releases, 90 × 34 × 48mm
• FlySpark XD2-V2 – dual-channel safety-pin dropper for DJI Mavic 3 and PWM drones
STANDARD SUPPLY
• FlySpark M18ZD1 dropper in the selected version (LED-V1, PWM-V1 or SQ-V1)
• Mounting strap (LED version) or strap / zip-ties
• PWM signal lead (PWM-V1 and SQ-V1)
• Quick-start and safety guide
• Smoke canisters are not included
IMPORTANT USE NOTE
The M18ZD1 is supplied only to verified end users. The buyer is responsible for using only lawful payloads, obtaining all airspace and operating permissions, and complying with applicable export controls. Payload fit is confirmed by FlySpark for the end user’s approved payload. Never fly over people, and always ground-test the release with no payload fitted before flight.
FREQUENTLY ASKED QUESTIONS
Q: What is a drone smoke canister dropper?
A: A drone smoke canister dropper is a small release mechanism fitted under a drone that holds a smoke canister and lets the pilot release it on command. It is used to mark landing zones, drop zones, wind direction and casualty or search positions from the air.
Q: What is the FlySpark M18ZD1?
A: The FlySpark M18ZD1 is a single-channel drone payload dropper sized for one M18-class smoke canister. The dropper body measures 48 × 48 × 88mm, runs on 5V and weighs approx. 77g in the LED version including its strap.
Q: Which payloads does the M18ZD1 carry?
A: It is designed for M18-class smoke canisters, held in a curved cradle that conforms to the canister body. Payload fit is confirmed by FlySpark for the end user’s approved payload before supply.
Q: What is the difference between the LED, PWM and SQ versions?
A: M18ZD1-LED-V1 is triggered by a light sensor over the drone’s bottom auxiliary light and needs no wiring. M18ZD1-PWM-V1 takes a PWM servo signal from the flight controller or receiver. M18ZD1-SQ-V1 uses the same PWM release with a quick-release mount for fast swaps.
Q: Which DJI drones does the LED version fit?
A: The M18ZD1-LED-V1 is listed for DJI Air 2 / Air 3 and DJI Mavic 2 / 3 / 4 folding camera drones. It straps under the aircraft body and the optical sensor is taped over the bottom auxiliary light.
Q: How does the light-sensor (LED) trigger work?
A: The pilot switches the aircraft’s bottom auxiliary light on from the flight app. The M18ZD1 sensor detects the light and opens the latch, releasing the canister. No connection to the drone’s electronics is required.
Q: Which drones suit the PWM and SQ versions?
A: FPV-class quadcopters and custom-built multirotors that have a free PWM output on the flight controller or receiver. The release is mapped to a transmitter switch.
Q: What are the dimensions and weight?
A: The dropper body is 48 × 48 × 88mm. The LED version weighs approx. 77g including the strap. Weights for the PWM-V1 and SQ-V1 versions are confirmed with the quotation.
Q: What voltage does the M18ZD1 need?
A: All three versions operate at 5V. The PWM versions take 5V and signal from the aircraft’s servo output.
Q: How many canisters can it carry?
A: One. The M18ZD1 is a single-channel dropper. For several canisters on one aircraft, FlySpark offers the multi-channel M18SD parallel-rack dropper series.
Q: How is the M18ZD1 mounted on the drone?
A: A foam saddle on top seats against the aircraft belly and the unit is held with a strap or zip-ties. The SQ version mounts on a quick-release base; the aircraft-side quick-release module is supplied to order.
Q: Does the dropper affect flight performance?
A: Yes, any payload reduces flight time and changes the centre of gravity. Check the aircraft’s take-off weight limit and balance with the canister fitted, and test hover before a mission.
Q: Can the M18ZD1 drop items other than smoke canisters?
A: The cradle is shaped for M18-class canisters. Other light items of similar size, such as marker beacons or small rescue packs, may fit; FlySpark confirms payload fit for the end user’s approved payload.
Q: Is the M18ZD1 suitable for military and police use?
A: Yes, for non-destructive tasks such as marker and screening smoke, landing-zone and drop-zone marking, signalling and training. Supply is limited to verified end users.
Q: Can it be used to carry weapons?
A: The M18ZD1 is supplied as a smoke canister and light payload release device. Integration of any other payload must be lawful, comply with national law, procurement rules and export controls, and is the responsibility of the authorised end user.
Q: What is the drone smoke dropper price in India?
A: Price is on request and depends on version and quantity. Contact FlySpark on WhatsApp or email for a quotation in INR or for export.
Q: What is the lead time, and do you export?
A: Lead time is confirmed with the quotation. FlySpark supplies across India and handles export enquiries subject to end-user documentation and applicable export controls.
Q: Is a smoke canister included?
A: No. Smoke canisters are not supplied with the dropper and must be sourced by the end user through lawful channels.
Q: How should I test the dropper before flight?
A: Power the dropper with no canister fitted, trigger the release from the ground several times, then load the canister and do a low hover test over a clear area before the mission.
Q: How does the M18ZD1 compare with the SMOKER2?
A: The M18ZD1 releases a complete M18-class canister to the ground. The SMOKER2 is a smoke generator that stays on the aircraft and produces a smoke trail in flight.
Q: Does FlySpark provide integration support?
A: Yes. FlySpark / AnuShakti Infotech Pvt. Ltd. helps with version selection, mounting, PWM channel setup, ground testing and operator briefing.
Q: What warranty is included?
A: Warranty covers manufacturing defects for 1 year under approved use and normal operating conditions. Crash damage, water ingress, wrong voltage or unauthorised modification may not be covered.
configurations de mission
Configuration (3)
Select your operational configuration. Pricing may vary — request a formal quote for deployment quantities.
Light-sensor triggered single-channel M18-class smoke canister dropper for DJI Air 2 / Air 3 and Mavic 2 / 3 / 4. No wiring; 5V.
SKU: FSP-DRP-M18ZD1-LED
Unit Price (EUR, départ usine)POAAvailable
PWM-triggered single-channel M18-class smoke canister dropper for FPV-class and custom-built drones. 5V; weight confirmed with quotation.
SKU: FSP-DRP-M18ZD1-PWM
Unit Price (EUR, départ usine)POAAvailable
PWM-triggered single-channel M18-class smoke canister dropper with quick-release mount. 5V; aircraft-side quick-release module and weight confirmed with quotation.
Confirmed by FlySpark for the end user’s approved payload
Cradle
Curved cradle conforms to the payload
Release Mechanism
Side-mounted servo latch, single-action release
Payload Included
No – smoke canisters sourced by the end user
straightenPhysical 5
Dropper Body Size
48 × 48 × 88mm
Weight (LED-V1)
Approx. 77g including strap
Weight (PWM-V1 / SQ-V1)
Confirmed with quotation
Housing
Light-grey housing with foam top saddle and foam-lined cradle
Controls
USB-C port and on/off slide switch on the housing
settingsElectrical & Trigger 5
Operating Voltage
5V
Signal
PWM / light-sensor
LED-V1 Trigger
Light sensor taped over the aircraft’s bottom auxiliary light, no wiring
PWM-V1 Trigger
PWM servo signal from flight controller or receiver
SQ-V1 Trigger
PWM servo signal, quick-release mount
settingsCompatibility & Mounting 4
LED-V1 Aircraft
DJI Air 2 / Air 3, DJI Mavic 2 / 3 / 4
PWM-V1 / SQ-V1 Aircraft
PWM-signal aircraft: FPV-class drones and custom-built camera drones
Mounting
Foam saddle against aircraft belly, strap / zip-tie
SQ-V1 Mounting
Quick-release mount; aircraft-side quick-release module supplied to order
settingsVariants 3
M18ZD1-LED-V1
Light-sensor trigger, DJI Air / Mavic, approx. 77g incl. strap
M18ZD1-PWM-V1
PWM trigger, FPV-class / custom-built drones
M18ZD1-SQ-V1
PWM trigger with quick-release mount
settingsSafety & Compliance 6
End users
Supplied only to verified end users
Lawful use only
Buyer responsible for lawful payloads, airspace permissions and export controls
Flight safety
Never fly over people; ground-test the release with no payload fitted before flight
Aircraft limits
Stay within the aircraft’s take-off weight and centre-of-gravity limits
Warranty
1 Year manufacturing defect support under approved use and normal operating conditions
Supplier
FlySpark / AnuShakti Infotech Pvt. Ltd.
Foire aux questions
Which drones does the M18ZD1 smoke dropper fit?
The LED-V1 fits DJI Air 2, Air 3 and Mavic 2, 3 and 4 with a light-sensor trigger; the PWM-V1 and SQ-V1 fit FPV-class and custom drones with a PWM output.
How is the M18ZD1 triggered on a DJI Mavic?
The LED-V1 optical sensor is taped over the drone's bottom auxiliary light; switching that light on in the flight app triggers the release. No wiring is needed.
What does the M18ZD1 weigh and what size is it?
The body measures 48 × 48 × 88 mm; the LED-V1 weighs about 77 g including strap. PWM-V1 and SQ-V1 weights are confirmed with the quotation.
What voltage does the M18ZD1 need?
All versions operate at 5 V; the PWM versions take a standard PWM servo signal from the flight controller or receiver.
Can FlySpark export the FlySpark M18ZD1 Single-Channel Drone Smoke Canister Dropper internationally?
Yes. The FlySpark M18ZD1 Single-Channel Drone Smoke Canister Dropper ships to defense, security, and critical-infrastructure buyers in our 10 export markets and other authorized destinations, with full export documentation — end-user certification, dual-use classification, and destination-specific compliance handled before dispatch.
What configurations of the FlySpark M18ZD1 Single-Channel Drone Smoke Canister Dropper are available?
The FlySpark M18ZD1 Single-Channel Drone Smoke Canister Dropper is offered in 3 configurations so you can match range, payload, and integration requirements. Custom builds are available for volume orders.
Do you provide technical support and documentation for the FlySpark M18ZD1 Single-Channel Drone Smoke Canister Dropper?
Every FlySpark M18ZD1 Single-Channel Drone Smoke Canister Dropper order includes datasheets, integration guidance, and compliance paperwork. Our engineering team supports commissioning, spares, and field deployment.
How do I request a quote for the FlySpark M18ZD1 Single-Channel Drone Smoke Canister Dropper?
Pricing for the FlySpark M18ZD1 Single-Channel Drone Smoke Canister Dropper is quoted on request. Contact the export desk with your quantity and destination for a formal quote that includes export documentation, compliance handling, and freight.
FlySpark peut-il exporter FlySpark M18ZD1 Single-Channel Drone Smoke Canister Dropper | M18-Class Canister, 48×48×88mm, 5V, PWM / Light-Sensor Trigger, DJI Air & Mavic & Quick-Release Versions vers France ?
Oui. FlySpark expédie vers France par la voie Fret aérien Inde → Europe ; le délai de transit est généralement de 7 à 12 jours. Les équipements anti-drones et radiofréquences nécessitent un utilisateur final autorisé et peuvent nécessiter un permis d'importation ; nous nous chargeons des formalités d'exportation.
Quel est le prix du FlySpark M18ZD1 Single-Channel Drone Smoke Canister Dropper | M18-Class Canister, 48×48×88mm, 5V, PWM / Light-Sensor Trigger, DJI Air & Mavic & Quick-Release Versions en France ?
Le prix indicatif est de Prix sur demande (EUR, départ usine Inde, converti de l'INR le 2026-11-20). Les frais de transport, d'assurance et les droits d'importation de France sont indiqués séparément ; l'offre définitive est émise en EUR par WhatsApp ou par e-mail.
Combien de temps faut-il pour la livraison vers France ?
Les configurations standard sont expédiées sous 3 à 6 semaines après confirmation de la commande ; le transport aérien vers France prend ensuite 7 à 12 jours. Les commandes sur mesure et les quantités importantes font l'objet d'un devis.
publicAchat de FlySpark M18ZD1 Single-Channel Drone Smoke Canister Dropper | M18-Class Canister, 48×48×88mm, 5V, PWM / Light-Sensor Trigger, DJI Air & Mavic & Quick-Release Versions auprès de France
FlySpark exporte le FlySpark M18ZD1 Single-Channel Drone Smoke Canister Dropper | M18-Class Canister, 48×48×88mm, 5V, PWM / Light-Sensor Trigger, DJI Air & Mavic & Quick-Release Versions vers le France depuis son site de Gandhinagar, en Inde. Les systèmes sont expédiés par la voie Fret aérien Inde → Europe avec un délai de transit habituel de 7 à 12 jours après validation des documents. Les devis sont établis en EUR (EXW Gandhinagar ; DAP/CIF sur demande), et chaque expédition comprend une facture commerciale, un bordereau de colisage et un certificat d'origine.
Délai de livraison : 3 à 6 semaines départ usine, plus 7 à 12 jours de transit vers France
Les droits d'importation et la TVA/TPS en vigueur dans le pays France sont à la charge de l'acheteur ; nous déclarons les codes SH et les valeurs exacts.
Paiement : virement bancaire (TT) ou lettre de crédit ; 50 % d’acompte, solde avant expédition
Mise en service à distance, formation des opérateurs et assistance pour les pièces détachées en France par appel vidéo et coursier
verified_userLes équipements RF et anti-drones sont fournis uniquement aux utilisateurs finaux autorisés. Selon la réglementation France , un permis d'importation et un certificat d'utilisateur final (EUC) peuvent être requis ; notre service export prépare les documents avec vous avant l'expédition.
Global export · local pricing
FlySpark M18ZD1 Single-Channel Drone Smoke Canister Dropper | M18-Class Canister, 48×48×88mm, 5V, PWM / Light-Sensor Trigger, DJI Air & Mavic & Quick-Release Versions — priced in 15 country editions
FlySpark exports this system worldwide with end-user certification, dual-use classification, and destination-specific compliance. Open your country edition for indicative local pricing; the binding quote is issued on WhatsApp in your currency.
Contactez notre équipe d'ingénierie de défense pour les achats en gros, la personnalisation, la documentation de conformité et le soutien au déploiement sur le terrain.