FlySpark 2.2G Long-Range FPV VTX-F10 | 4.5W Analog Video Transmitter Module | 2000MHz–2200MHz

Key facts

At a glance

The FlySpark VTX-F10 is an analog FPV video transmitter module for the 2000–2200 MHz band, aimed at UAV integrators building long-range fixed-wing, inspection and R&D platforms. It outputs up to 4.5 W across 8 channels, accepts 7–36 V DC input and mounts on a 30.5 × 30.5 mm M3 pattern.

Use cases

• Long-range analog video downlink on fixed-wing FPV and UAV platforms
• Inspection UAV video links in the 2.0–2.2 GHz band
• UAV lab and R&D analog video-link testing
• Bench setup using PIT and 25 mW low-power modes

Standards & references

• ITU Radio Regulations — The 2000–2200 MHz range is allocated internationally to licensed services, so use of a 4.5 W transmitter there depends on the national allocation and an assignment from the regulator.
• DoT Wireless Planning & Coordination (WPC) spectrum management, India — In India, operating an RF transmitter outside de-licensed bands requires frequency authorisation from WPC; the catalog requires users to follow WPC/DoT rules.

Sources: FlySpark catalog data; FlySpark product page. Updated 12 Oct 2026.

Intelligence Brief

Mission overview

FlySpark 2.2G Long-Range FPV VTX-F10 | 4.5W Analog Video Transmitter Module

The FlySpark 2.2G Long-Range FPV VTX-F10 is a high-power analog FPV video transmitter designed for FPV drones, fixed-wing UAVs, long-range drone platforms, inspection UAVs, surveillance drone systems, testing rigs and custom unmanned aircraft builds that require a 2.0GHz–2.2GHz video transmission link. With up to 4.5W RF output power and 8-channel frequency support from 2000MHz to 2200MHz, the VTX-F10 is built for professional long-range analog video-link integration.

The module supports IRC control protocol and OSD parameter adjustment, allowing supported flight-controller / OSD systems to configure VTX parameters more conveniently. It supports PIT Mode, 25mW, 800mW and 4500mW power levels, making it useful for bench setup, short-range testing and high-power long-range operation. The wide DC 7V–36V input voltage range and DC 5V output make it compatible with multiple UAV power-system layouts.

The VTX-F10 uses a standard SMA antenna interface, 30.5mm × 30.5mm M3 mounting pattern and compact 37mm × 37mm × 19mm body size excluding SMA head.

• KEY FEATURES:
• • 2.0G–2.2G analog FPV video transmitter | 2000MHz–2200MHz | 8CH
• • Up to 4.5W RF output | PIT/25mW/800mW/4500mW modes
• • IRC control | OSD parameter adjustment | DC 7V–36V input | DC 5V output
• • SMA antenna | 30.5×30.5mm M3 mounting | 37×37×19mm body

IMPORTANT USE NOTE: This product is a high-power RF video transmitter module. Use only on legally permitted frequencies, power levels and operating locations. Users must follow WPC/DoT/local spectrum regulations, aviation rules, RF safety requirements, site permissions and lawful drone operation practices. Always connect a suitable antenna or RF load before powering the VTX to prevent RF power-stage damage.

FREQUENTLY ASKED QUESTIONS: