FlySpark 24-Inch Heavy-Lift FPV Drone | 1000mm Wheelbase, 15kg Rated Load, 12S Power, 5.8G 2.5W VTX & ELRS915 Control

Key facts

At a glance

The FlySpark 24-Inch Heavy-Lift FPV Drone is a foldable X-frame multirotor with a 1000 mm wheelbase for payload integration, industrial testing, training and R&D. It weighs 6 kg without battery, is rated for a 15 kg payload (16 kg maximum, 26 kg maximum takeoff weight) and flies about 15 minutes at rated load or about 60 minutes without load on a 12S 33000 mAh battery. The standard build is listed at A$7,490

Use cases

• Heavy-lift FPV flight testing and payload integration trials
• Camera and sensor payload testing
• Lawful non-hazardous payload transport trials in approved areas
• Industrial inspection support and remote-area UAV evaluation
• Professional FPV training and academic UAV research

Standards & references

• Drone Rules, 2021 (India, G.S.R. 589(E)) — With a 26 kg maximum takeoff weight the drone falls in the Rules' medium class (more than 25 kg up to 150 kg), which governs type certification, registration (UIN) and remote-pilot requirements for civil operation in India.
• DoT Wireless Planning & Coordination (WPC) Wing, India — The 915 MHz ELRS control link and 5.8 GHz 2.5 W video transmitter may be used only on frequencies and power levels permitted by WPC/DoT.

Sources: FlySpark catalog data; FlySpark product page; Drone Rules, 2021 (Gazette of India). Updated 12 Oct 2026.

Intelligence Brief

Mission overview

FlySpark 24-Inch Heavy-Lift FPV Drone is a professional large-format FPV UAV platform designed for high-payload FPV operations, industrial field testing, payload integration, long-endurance no-load flight, training, inspection support, logistics trials, R&D projects and custom UAV development. Built on a 24-inch X-type frame with 1000mm wheelbase, this platform offers a strong combination of carrying capacity, FPV control, 12S power architecture and high-speed flight capability.

The drone uses an H743 flight controller, 100A 12S ESC setup, 6215-250KV motors, 2480 propellers, ELRS915 receiver, 5.8GHz 2.5W video transmitter, 5.8GHz 151mm 3.5dBi antenna and 1500TVL 165-degree wide-angle FPV camera. The airframe has an expanded size of 800mm × 800mm × 580mm and folds down to 450mm × 550mm × 580mm for easier transport and storage.

The platform weight is 6kg without the recommended battery. The recommended battery is 12S 33000mAh, approximately 4kg, with XT90 / QS80 connector support. The drone is rated for a 15kg payload, supports up to 16kg maximum load, and has a maximum takeoff weight of 26kg. With rated load and 33000mAh battery, flight time is approximately 15 minutes. With no load, flight time can reach approximately 60 minutes depending on battery condition, setup, flying style and environment.

This drone is best suited for professional users who need a large FPV platform with heavy-lift ability, strong propulsion, long-range control hardware, high-power analog video link and custom payload integration support. Final payload mounting, flight tuning, battery selection and mission setup should be performed by trained UAV operators.

• PRODUCT POSITIONING:
• • 24-inch heavy-lift FPV drone
• • 1000mm wheelbase UAV platform
• • X-type frame design
• • 15kg rated load
• • 16kg maximum load
• • 26kg maximum takeoff weight
• • 12S 33000mAh recommended battery
• • H743 flight controller
• • 100A 12S ESC setup
• • 6215-250KV motors
• • 2480 propellers
• • ELRS915 receiver
• • 5.8GHz 2.5W analog VTX
• • 5.8GHz 151mm 3.5dBi antenna
• • 1500TVL wide-angle FPV camera
• • Up to 100km/h maximum flight speed
• • Foldable for field transport
• • Suitable for professional FPV payload integration

• BEST USE CASES:
• • Heavy-lift FPV flight testing
• • Industrial UAV R&D
• • Payload integration trials
• • Long-range FPV platform development
• • Camera and sensor payload testing
• • Utility drone development
• • Professional FPV training
• • Field inspection support
• • Custom UAV engineering
• • Non-hazardous payload transport trials
• • Search and observation payload testing where lawful
• • Agriculture field monitoring payload testing
• • Remote-area UAV evaluation
• • Industrial site UAV testing
• • Academic and institutional UAV research

• STANDARD BUILD INCLUDED:
• • FlySpark 24-inch X-type heavy-lift FPV airframe
• • H743 flight controller
• • 100A ESC 12S × 4
• • 6215-250KV motors
• • 2480 propellers
• • ELRS915 receiver
• • 5.8GHz 2.5W analog VTX
• • 5.8GHz 151mm 3.5dBi antenna
• • 1500TVL 165-degree wide-angle FPV camera

IMPORTANT USE NOTE: This FlySpark FPV drone is intended for lawful professional UAV operation, industrial testing, training, inspection, logistics trials, payload integration and R&D use only. It must not be used for unlawful surveillance, unsafe autonomous operation, weaponized payloads, harmful payload delivery, public-risk flights or violation of aviation rules. Operate only under DGCA/local aviation rules, RF regulations, site permissions, privacy laws and safe UAV procedures. The 5.8GHz VTX must be used only on legally permitted frequencies and power levels. Always connect a suitable antenna before powering the VTX.

FREQUENTLY ASKED QUESTIONS: