FlySpark XD2-V2 Pin-Release Dual-Channel Drone Dropper | 2 Independent Pin Channels, Mavic 3 Light-Sensor or PWM Trigger, 130×42×46 mm, 110–125 g & 5 V — view 1

FlySpark XD2-V2 Pin-Release Dual-Channel Drone Dropper | 2 Independent Pin Channels, Mavic 3 Light-Sensor or PWM Trigger, 130×42×46 mm, 110–125 g & 5 V

В наявності
FlySpark

FlySpark XD2-V2 Pin-Release Dual-Channel Drone Dropper | 2 Independent Pin Channels, Mavic 3 Light-Sensor or PWM Trigger, 130×42×46 mm, 110–125 g & 5 V — доступний для експорту до Україна. Орієнтовна ціна Ціна за запитом (UAH, ex-works). Остаточна пропозиція, строки та документи кінцевого користувача у WhatsApp.

Базова ціна — FlySpark XD2-LED-V2 – Light-Sensor, DJI Mavic 3 (130 × 42 × 46 mm, approx. 110–125 g)
POA
Без ПДВ · Остаточна ціна залежить від конфігурації та кількості

FlySpark

Конфігурація : FlySpark XD2-LED-V2 – Light-Sensor, DJI Mavic 3 (130 × 42 × 46 mm, approx. 110–125 g)

Замовлення підтверджує наш відділ продажу у WhatsApp із пропозицією у UAH.

Кількість

Ціна за запитом — напишіть нам у WhatsApp щодо ціни та строків.

verified_user

Гарантована військова якість

lock

Документація, що відповідає експортним вимогам

headset_mic

Інженерна підтримка 24/7

Відділ продажів

Mon – Sun · 19:30 – 03:30 IST · [email protected]

FSP-DRP-XD2-LED
Активний
3
33
  • flyspark
  • xd2-v2
  • xd2-led-v2
  • xd2-pwm-v2
  • xd2-sq-v2
  • drone-dropper
  • drone-droppers
  • pin-release-dropper
  • pin-release-drone-dropper
  • dual-channel-dropper
  • dual-channel-drone-dropper
  • drone-payload-dropper

Key facts

At a glance

The FlySpark XD2-V2 is a dual-channel pin-release drone dropper with two independent channels that drop one payload, the other, or both. It measures 130 × 42 × 46 mm, weighs about 110–125 g and runs on 5 V. It comes as a light-sensor version for the DJI Mavic 3 (no wiring) or PWM-triggered versions, including a quick-release mount, for FPV-class and custom drones.

FlySpark XD2-V2 Pin-Release Dual-Channel Drone Dropper | 2 Independent Pin Channels, Mavic 3 Light-Sensor or PWM Trigger, 130×42×46 mm, 110–125 g & 5 V — key specifications
Channels / release modes2 independent pin channels; channel 1, channel 2 or both
Dimensions (L × W × H)130 × 42 × 46 mm
WeightApprox. 110–125 g (varies by variant)
Operating voltage5 V
XD2-LED-V2Optical sensor over bottom auxiliary light; DJI Mavic 3; strapped under body
XD2-PWM-V2PWM from FC or receiver; FPV-class and custom drones
XD2-SQ-V2PWM trigger with quick-release mount
PriceOn request

Use cases

  • Two separate drops per sortie from a DJI Mavic 3 without wiring into the aircraft
  • Dual-payload release on FPV-class and custom camera drones
  • Search-and-rescue, marker and small supply drops

Standards & references

  • India Drone Rules, 2021 (G.S.R. 589(E)) — Payload drops in India are flown under these Rules; Rule 27 bars carrying arms or explosives and Rule 28 restricts dangerous goods without the required permissions.

Sources: FlySpark catalog data; FlySpark product page. Updated .

Intelligence Brief

Огляд місії

The FlySpark XD2-V2 is a pin-release dual-channel drone dropper: a compact payload release system that retains each of two payloads with its own removable retention pin, and withdraws that pin by servo to release the payload on command. The two channels are independently controllable, the body measures 130 × 42 × 46 mm, weight is approx. 110–125 g depending on variant, and the unit runs on 5 V.

FlySpark XD2-V2 pin-release dual-channel drone dropper product overview video
FlySpark XD2-V2 pin-release dual-channel drone dropper, shown empty with both pin brackets closed
FlySpark XD2-V2 pin-release dual-channel drone dropper, shown empty with both pin brackets closed

The XD2-V2 is part of the FlySpark UAV Payload Droppers & Release Systems range, supplied and supported in India by AnuShakti Infotech Pvt. Ltd., with export enquiries handled subject to end-user verification and export controls.

Three versions share the same body. The XD2-LED-V2 fits the DJI Mavic 3 and triggers from the drone’s bottom auxiliary light through an optical sensor, so nothing is wired into the aircraft. The XD2-PWM-V2 takes a standard servo-type PWM signal from the flight controller or receiver of FPV-class and custom-built drones, and the XD2-SQ-V2 is the quick-release mount version of the PWM dropper.

FlySpark XD2-V2 drone dropper specification sheet – 130 × 42 × 46 mm, 110–125 g, 5 V, PWM or light-sensor trigger
FlySpark XD2-V2 drone dropper specification sheet – 130 × 42 × 46 mm, 110–125 g, 5 V, PWM or light-sensor trigger

WHY CHOOSE THE XD2-V2 PIN-RELEASE DRONE DROPPER

Pin retention is positive: the pin passes through the payload’s loop or lug, so the item cannot work loose from vibration or manoeuvring, and release depends only on the servo withdrawing the pin. With two independent channels, one sortie can deliver two items to two different points, or both together. At 130 × 42 × 46 mm and approx. 110–125 g the XD2-V2 is light enough for camera drones such as the DJI Mavic 3 as well as FPV-class and custom-built multirotors.

FlySpark XD2-V2 variant comparison – XD2-LED-V2, XD2-PWM-V2 and XD2-SQ-V2 drone droppers
FlySpark XD2-V2 variant comparison – XD2-LED-V2, XD2-PWM-V2 and XD2-SQ-V2 drone droppers
  • XD2-V2 DROPPER KEY FEATURES
  • • Pin-release retention: each payload is held by its own removable pin
  • • Servo withdraws the pin to release that channel only
  • • Two channels, independently controllable
  • • Compact 130 × 42 × 46 mm body
  • • Approx. 110–125 g depending on variant
  • • 5 V operation
  • • LED version: light-sensor trigger for DJI Mavic 3, no wiring into the aircraft
  • • PWM version: servo-type PWM signal from FC or receiver
  • • SQ version: quick-release mount for fast fitting and removal
  • • Foam-padded mounting face against the aircraft
  • • Suits payloads with a loop, ring or lug
  • • Ground-testable release with props removed
FlySpark XD2-V2 drone dropper side profile with two inert training cylinders on independent retention pins
FlySpark XD2-V2 drone dropper side profile with two inert training cylinders on independent retention pins

HOW THE XD2-V2 PIN RELEASE WORKS

Each payload is seated in its bracket and locked by a removable retention pin. In flight the pin carries the load. When the release command arrives, the servo withdraws the pin of the selected channel only, and that payload drops free while the other channel stays locked.

FlySpark XD2-V2 pin-release mechanism – load, fly and servo-withdrawn pin release with two independent channels
FlySpark XD2-V2 pin-release mechanism – load, fly and servo-withdrawn pin release with two independent channels
FlySpark XD2-V2 pin-release drone dropper macro close-up of a black twin-clip bracket and steel retention pin holding an inert training cylinder
FlySpark XD2-V2 pin-release drone dropper macro close-up of a black twin-clip bracket and steel retention pin holding an inert training cylinder

On the XD2-LED-V2 the command is the Mavic 3’s bottom auxiliary light, switched from the pilot app or controller and read by the optical sensor. On the XD2-PWM-V2 and XD2-SQ-V2 the command is a PWM signal from a spare flight-controller or receiver output assigned to a transmitter switch; channel mapping is set and tested at commissioning.

FlySpark XD2-V2 drone dropper trigger and wiring diagram – DJI Mavic 3 light sensor vs PWM from FC or receiver
FlySpark XD2-V2 drone dropper trigger and wiring diagram – DJI Mavic 3 light sensor vs PWM from FC or receiver
FlySpark XD2-V2 dropper underside showing two retention-pin brackets and the release servo
FlySpark XD2-V2 dropper underside showing two retention-pin brackets and the release servo

XD2-V2 DIMENSIONS

FlySpark XD2-V2 pin-release dropper dimensions drawing – 130 × 42 × 46 mm side and end views
FlySpark XD2-V2 pin-release dropper dimensions drawing – 130 × 42 × 46 mm side and end views

COMPATIBLE AIRCRAFT & MOUNTING

The XD2-LED-V2 is strapped under the body of a DJI Mavic 3 with the optical sensor over the bottom auxiliary light. The XD2-PWM-V2 is fixed to the underside of an FPV-class or custom-built PWM-signal drone, and the XD2-SQ-V2 uses a quick-release mount so the dropper can be fitted or removed quickly between sorties; aircraft-side quick-release parts are quoted separately. Always keep total take-off weight within the aircraft maker’s limits and check balance before flight.

FlySpark XD2-V2 drone dropper compatible aircraft and mounting – DJI Mavic 3, FPV-class and custom-built drones
FlySpark XD2-V2 drone dropper compatible aircraft and mounting – DJI Mavic 3, FPV-class and custom-built drones
FlySpark XD2-LED-V2 pin-release dropper strapped under a DJI Mavic 3-class drone carrying two orange rescue pouches over hills
FlySpark XD2-LED-V2 pin-release dropper strapped under a DJI Mavic 3-class drone carrying two orange rescue pouches over hills
FlySpark XD2-LED-V2 pin-release dropper strapped under a DJI Mavic 3-class drone on an equipment case during pre-flight checks
FlySpark XD2-LED-V2 pin-release dropper strapped under a DJI Mavic 3-class drone on an equipment case during pre-flight checks
  • VARIANTS
  • • XD2-LED-V2 – light-sensor trigger, DJI Mavic 3, 130 × 42 × 46 mm, approx. 110–125 g, 5 V
  • • XD2-PWM-V2 – PWM trigger, PWM-signal aircraft (FPV-class and custom-built drones), 130 × 42 × 46 mm, approx. 110–125 g, 5 V
  • • XD2-SQ-V2 – PWM trigger, quick-release mount version for PWM-signal aircraft, 130 × 42 × 46 mm, approx. 110–125 g, 5 V

DEFENCE & MILITARY APPLICATIONS

For armed forces, government security agencies and public-safety units, the XD2-V2 provides a light, two-channel release for approved support, signalling and training payloads from small drones. Payload fit is confirmed by FlySpark for the end user’s approved payload.

  • • Marker and screening smoke deployment with compact smoke canisters
  • • Signalling and marker drops for landing zones and rendezvous points
  • • Inert training payload drops for drill and procedure rehearsal
  • • Sensor, beacon and radio-relay emplacement
  • • Emergency resupply: tourniquet kits, batteries, radios, water purification tabs
  • • Decoy and reflector release
  • • Perimeter-sensor seeding
  • • EOD and CBRN team training drops
  • • Search and rescue of personnel
  • • Integration of other authorised payloads by the end user in accordance with national law and procurement rules
FlySpark XD2-PWM-V2 dual-channel dropper under an FPV-class quadcopter releasing an inert training cylinder
FlySpark XD2-PWM-V2 dual-channel dropper under an FPV-class quadcopter releasing an inert training cylinder

CIVILIAN & COMMERCIAL APPLICATIONS

For rescue teams, utilities, agriculture and research, the XD2-V2 turns a small drone into a precise two-drop delivery platform.

  • • Search-and-rescue drops of radios, flotation aids and medical kits
  • • Mountain and maritime rescue support
  • • Utility pilot-line drops for power-line stringing
  • • Firefighting extinguisher-ball drops where size fits
  • • Agriculture: seed balls and bio-control capsules
  • • Fishing bait drops
  • • Wildlife research: tag, sensor and sample-kit delivery
  • • Event and demonstration drops
  • • University and R&D payload-release research
FlySpark XD2-V2 dual-channel drone dropper on a custom-built quadcopter carrying flotation pouches over the sea
FlySpark XD2-V2 dual-channel drone dropper on a custom-built quadcopter carrying flotation pouches over the sea
FlySpark XD2-LED-V2 dual-channel drone dropper releasing one orange rescue pouch over snow during a mountain search-and-rescue mission
FlySpark XD2-LED-V2 dual-channel drone dropper releasing one orange rescue pouch over snow during a mountain search-and-rescue mission

COMPARE THE FLYSPARK DROPPER RANGE

The XD2-V2 is the compact two-channel pin-release choice. Pick a curved-cradle model for smooth cylindrical payloads, or a multi-channel model when a larger multirotor needs to carry more items.

  • • FlySpark XD4-V2 – longer pin-release dropper, 282 × 46 × 47 mm, approx. 240 g, PWM
  • • FlySpark ZD1-V3 – single-channel curved-cradle dropper, 50 × 50 × 70 mm, approx. 50 g, LED / PWM / SQ
  • • FlySpark ZD2-V3 – dual-channel curved-cradle dropper, 90 × 34 × 48 mm, approx. 56–75 g, LED / PWM / SQ
  • • FlySpark ZD4 – 4-channel dropper, 90 × 146 × 48 mm, approx. 120 g, CRSF / SQ
  • • FlySpark ZD6 – 6-channel dropper, 230 × 94 × 48 mm, approx. 300 g, 7–28 V CRSF / SQ
  • • FlySpark ZD8 – 8-channel dropper, 225 × 130 × 48 mm, approx. 350 g, 7–28 V CRSF / SQ
  • STANDARD SUPPLY
  • • FlySpark XD2-V2 pin-release dual-channel dropper in the ordered variant (LED, PWM or SQ)
  • • Two retention pins fitted
  • • Mounting straps for the LED version; servo lead for the PWM and SQ versions
  • • Optical light sensor (LED version)
  • • Quick-release mount, dropper side (SQ version)
  • • Set-up guide and FlySpark commissioning support

IMPORTANT USE NOTE The XD2-V2 is supplied only to verified end users. The buyer is responsible for using lawful payloads, obtaining airspace permissions and complying with export controls and local regulations. Never fly over people, test every release on the ground with propellers removed, and keep total take-off weight within the aircraft maker’s limits.

FREQUENTLY ASKED QUESTIONS

Конфігурації місій

Конфігурація (3)

Select your operational configuration. Pricing may vary — request a formal quote for deployment quantities.

Pin-release dual-channel dropper with optical light-sensor trigger for the DJI Mavic 3; no wiring into the aircraft. 5 V.

SKU: FSP-DRP-XD2-LED

Unit Price (UAH, ex-works)POAAvailable

Pin-release dual-channel dropper triggered by PWM from the flight controller or receiver of PWM-signal aircraft. 5 V.

SKU: FSP-DRP-XD2-PWM

Unit Price (UAH, ex-works)POAAvailable

Quick-release mount version of the PWM pin-release dual-channel dropper for PWM-signal aircraft. Aircraft-side quick-release parts quoted separately. 5 V.

SKU: FSP-DRP-XD2-SQ

Unit Price (UAH, ex-works)POAAvailable

Активна конфігурація

FlySpark XD2-LED-V2 – Light-Sensor, DJI Mavic 3 (130 × 42 × 46 mm, approx. 110–125 g)

Pin-release dual-channel dropper with optical light-sensor trigger for the DJI Mavic 3; no wiring into the aircraft. 5 V.

POA

UAH · орієнтовно ex-works

SKU: FSP-DRP-XD2-LED

Матриця конфігурації

Порівняйте всі варіанти

Порівняльні характеристики — клацніть стовпець, щоб вибрати

Parameter
Unit Price (UAH, ex-works)POAPOAPOA
StockAvailableAvailableAvailable
SKUFSP-DRP-XD2-LEDFSP-DRP-XD2-PWMFSP-DRP-XD2-SQ

Technical Data Sheet

System Specifications

33 parameters across 7 categories

General7 fields

Product Type
Pin-release dual-channel drone payload dropper
Model Name
FlySpark XD2-V2 Pin-Release Dual-Channel Drone Dropper
Product Category
UAV Payload Droppers & Release Systems
Variants
XD2-LED-V2, XD2-PWM-V2, XD2-SQ-V2
Price
On request
SKU
FSP-DRP-XD2-LED
Supplier / Integration Support
FlySpark / AnuShakti Infotech Pvt. Ltd.

Complete specification index

Часті запитання

Купівля FlySpark XD2-V2 Pin-Release Dual-Channel Drone Dropper | 2 Independent Pin Channels, Mavic 3 Light-Sensor or PWM Trigger, 130×42×46 mm, 110–125 g & 5 V з Україна

FlySpark експортує FlySpark XD2-V2 Pin-Release Dual-Channel Drone Dropper | 2 Independent Pin Channels, Mavic 3 Light-Sensor or PWM Trigger, 130×42×46 mm, 110–125 g & 5 V до Україна з нашого заводу в Гандінагарі, Індія. Системи відправляються маршрутом Авіаперевезення Індія → Європа з типовим часом доставки 7–12 днів після оформлення документації. Кошториси виставляються в UAH ( EXW Гандінагар; DAP/CIF за запитом ), і кожна партія містить комерційний рахунок-фактуру, пакувальний лист та сертифікат походження.

  • Термін виконання: 3–6 тижнів франко-завод, плюс 7–12 днів транспортування до Україна
  • Імпортне мито та ПДВ/ПДВ у Україна сплачує покупець; ми декларуємо точні коди та значення HS
  • Оплата: банківський переказ (TT) або акредитив; 50% аванс, решта до відправлення
  • Дистанційне введення в експлуатацію, навчання операторів та підтримка запасних частин у Україна через відеодзвінок та кур'єрську службу

Радіочастотне та протидіюче обладнання БПЛА постачається лише уповноваженим кінцевим користувачам. Залежно від правил Україна може знадобитися дозвіл на імпорт та сертифікат кінцевого користувача (EUC) — наш відділ експорту готує документи разом з вами перед відправкою.

Global export · local pricing

FlySpark XD2-V2 Pin-Release Dual-Channel Drone Dropper | 2 Independent Pin Channels, Mavic 3 Light-Sensor or PWM Trigger, 130×42×46 mm, 110–125 g & 5 V — priced in 15 country editions

FlySpark exports this system worldwide with end-user certification, dual-use classification, and destination-specific compliance. Open your country edition for indicative local pricing; the binding quote is issued on WhatsApp in your currency.

All export markets

Та сама категорія

Пов'язані системи

Готово до розгортання

Готові до розгортання?

Зверніться до нашої команди оборонних інженерів для оптових закупівель, налаштування, документації відповідності та підтримки розгортання в польових умовах.