Zzgl. MwSt. · Endpreis abhängig von Konfiguration und Menge
FlySpark RD5-35 revolver drone payload dropper: 5 positions for 35 mm-class payloads, PWM, 5 V, 300 g. For FPV-class and M350-class drones. India & export.
The FlySpark RD5-35 is a five-position revolver (rotary) payload dropper for 35 mm-class cylindrical payloads. Each PWM command indexes the wheel one position and releases one payload at the gate, giving five separate drops from one unit and one channel. It measures 180 × 110 × 165 mm, weighs about 300 g, runs on 5 V and mounts by quick-release plate on FPV-class or DJI M350-class drones; price is on request.
FlySpark RD5-35 is a 5-position revolver drone payload dropper that releases up to five 35 mm-class cylindrical payloads, one position at a time, from a single compact rotary unit. The dropper measures 180 × 110 × 165 mm, weighs approximately 300 g, runs on 5 V and is triggered by a standard PWM signal from the aircraft's flight controller or receiver, so it can be fitted to FPV-class drones, custom-built multirotors and DJI M350-class enterprise drones.
FlySpark RD5-35 revolver drone dropper product overview video
The RD5-35 is part of the FlySpark UAV Payload Droppers & Release Systems range, supplied and supported in India by AnuShakti Infotech Pvt. Ltd. for defence, government security, public-safety and professional integration customers, with export enquiries handled under applicable controls.
Instead of spreading payloads along a flat rack, the RD5-35 carries them in a rotary wheel inside a deep, compact housing. Each PWM command indexes the wheel and frees the payload at the release gate, while the remaining positions stay seated for the next command. The single central mounting point keeps the load close to the aircraft's centre of gravity, and the quick-release plate lets crews swap a reloaded dropper between sorties in seconds. The dropper-side quick-release seat is a free upgrade; the aircraft-side seat is sold separately.
FlySpark RD5-35 drone payload dropper dimensions drawing – 180 × 110 × 165 mm (W × D × H), approx. 300 g
WHY CHOOSE THE RD5-35 REVOLVER DRONE DROPPER
• Five separate drops from one unit and one PWM channel, without wiring several single-channel droppers
• Compact 180 × 110 × 165 mm rotary block at approximately 300 g, sized for FPV-class and M350-class airframes
• Simple, proven 5 V PWM servo interface that works with common flight controllers, receivers and mission planners
• Quick-release plate mounting for fast turnaround and for moving one dropper between several aircraft
• Configured, ground-tested and supported by FlySpark in India
• Standard PWM trigger from flight controller or receiver
• 5 V operation from BEC or FC servo rail
• Compact 180 × 110 × 165 mm rotary block
• Approx. 300 g dropper weight
• Quick-release plate mounting (SQ variant)
• Dropper-side quick-release seat as a free upgrade
• Fits FPV-class drones and DJI M350-class enterprise drones
• Single central mounting point keeps the load near the centre of gravity
• Commissioning, channel set-up and operator training by FlySpark
FlySpark RD5-35 revolver drone dropper front view with all five payload positions empty, showing the rotary wheel and central hub
HOW THE RD5-35 PAYLOAD RELEASE WORKS
The operator assigns a switch or button on the transmitter, or an auxiliary output in the mission planner, to a spare PWM channel. When the channel is commanded, the RD5-35 rotates its wheel to the next position and the payload at the release gate falls clear under gravity. The remaining payloads stay locked in the wheel until the next command. Channel mapping, PWM endpoints and failsafe behaviour are configured and verified by FlySpark at commissioning, and any multi-drop sequencing is confirmed at configuration.
FlySpark RD5-35 revolver payload release sequence – loaded, PWM command, one position releasedFlySpark RD5-35 revolver drone dropper PWM connector detail – 3-wire servo lead plugged into the quick-release mounting plate, five orange inert training cylinders loadedFlySpark RD5-35 PWM trigger and wiring diagram – transmitter, receiver or flight controller, 5 V servo-style connection
COMPATIBLE AIRCRAFT & MOUNTING
The RD5-35 is intended for FPV-class drones and custom-built multirotors, and for DJI M350-class enterprise drones fitted with a payload rail adapter. It mounts through a quick-release plate: the dropper-side seat sits on the top plate of the RD5-35 and the aircraft-side seat, sold separately, is fixed to the airframe or payload rail. Before flight, add approximately 300 g plus the payloads to the take-off weight and re-check centre of gravity and hover margin.
FlySpark RD5-35 drone dropper mounting and compatibility – quick-release seats for FPV-class and DJI M350-class dronesFlySpark RD5-35 revolver drone dropper pre-flight on a rugged equipment case beside an FPV-class quadcopter, transmitter and field tablet
RD5-35 VARIANTS
• 35RD5-PWM – standard 5-position revolver, 5 V, PWM trigger, 180 × 110 × 165 mm, approx. 300 g
• 35RD5-SQ – quick-release (SQ) version of the same revolver, 5 V, PWM trigger, 180 × 110 × 165 mm, approx. 300 g
FlySpark RD5-35 variants 35RD5-PWM and 35RD5-SQ compared with LD2, LD4, LD6 and LD8 35 mm-class parallel-rack droppers
DEFENCE & MILITARY APPLICATIONS
For armed forces, paramilitary units and government security agencies, the RD5-35 gives a small drone five separate, precisely timed drops of approved 35 mm-class payloads from one sortie, for marking, signalling, training and resupply tasks.
• Marker and screening smoke deployment using compatible small-format canisters
• Signalling and position marking for ground teams
• Inert training payload drops for drone-operator and range training
• Sensor, beacon and relay emplacement in denied or difficult terrain
• Emergency resupply of small items such as tourniquet kits, batteries and water purification tabs
• Decoy and reflector release for training and test ranges
• EOD and CBRN team training with inert marker payloads
• Perimeter-sensor seeding along borders and installations
• Search and rescue of personnel with beacons and rescue capsules
• Integration of other authorised payloads by the end user in accordance with national law and procurement rules
CIVILIAN & COMMERCIAL APPLICATIONS
For rescue services, utilities, agriculture and research teams, the RD5-35 turns a compact multirotor into a multi-drop delivery tool for small items that must reach a precise spot.
• Search and rescue drops of compact beacons, whistles and medical capsules
• Mountain and maritime rescue: small flotation or marker capsules to people in difficulty
• Utility pilot-line drops for power-line stringing across rivers and gorges
• Agriculture: seed balls and bio-control capsules over small plots
• Fishing bait and line delivery
• Wildlife research: tracking-tag capsules and sample containers
• Events and demonstrations with lightweight novelty drops
• University and R&D projects on multi-drop payload release
FlySpark RD5-35 revolver drone dropper releasing one orange rescue capsule from an FPV-class quadcopter during a coastal maritime rescue drill, four positions still loaded
COMPARE THE FLYSPARK DROPPER RANGE
The RD5-35 is the compact rotary option for the 35 mm payload class. Choose a parallel-rack model when you need more channels along a flat under-body mount, or a single-channel model for small camera drones.
• FlySpark LD2 / LD4 / LD6 / LD8 – 35 mm-class parallel-rack droppers with 2 to 8 channels for flat under-body mounting
• FlySpark ZD1-V3 – single-channel dropper for DJI Mavic / Air-class camera drones with light-sensor, PWM or quick-release options
• FlySpark ZD4 – 4-channel CRSF dropper for FPV-class and custom multirotors
• FlySpark QD60 series – heavy parallel-rack droppers for Ø60 mm-class cylindrical payloads on larger airframes
• FlySpark M18SD series – multi-channel parallel droppers for M18-class smoke canisters
FlySpark RD5-35 5-position revolver drone dropper three-quarter view showing the deep housing and quick-release mounting plate
STANDARD SUPPLY:
• FlySpark RD5-35 5-position revolver dropper (35RD5-PWM or 35RD5-SQ)
• PWM signal and 5 V power lead
• Dropper-side quick-release seat (free upgrade)
• Installation and channel set-up guide
• Commissioning and operator training support from FlySpark
• Aircraft-side quick-release seat sold separately
IMPORTANT USE NOTE:
The RD5-35 is supplied only to verified end users. The buyer is responsible for using only lawful payloads, for obtaining all airspace permissions and operating approvals, and for complying with export-control and end-use regulations. Never fly over people or release payloads over people, property or public roads. Payload fit is confirmed by FlySpark for the end user's approved payload.
FREQUENTLY ASKED QUESTIONS:
Q: What is a revolver drone dropper?
A: A revolver (rotary) drone dropper carries several payloads in a rotating wheel under the aircraft. Each release command indexes the wheel so one payload position is freed at a time, giving several separate drops from a single, compact unit.
Q: What is the FlySpark RD5-35?
A: The FlySpark RD5-35 is a 5-position revolver drone payload dropper for 35 mm-class cylindrical payloads. It measures 180 × 110 × 165 mm, weighs approximately 300 g, runs on 5 V and is triggered by a PWM signal from the flight controller or receiver.
Q: How many payloads does the RD5-35 carry?
A: Five. The payload positions are arranged on a rotary wheel inside the housing.
Q: What payloads fit the RD5-35?
A: The wheel is sized for 35 mm-class cylindrical payloads such as inert training cylinders, marker capsules, compact beacons and small rescue capsules. Payload fit is confirmed by FlySpark for the end user’s approved payload before supply.
Q: How is the RD5-35 triggered?
A: By a standard PWM servo signal on a spare flight-controller or receiver channel. The operator assigns a switch or button on the transmitter, or an auxiliary output in the mission planner, to command each release.
Q: What voltage does the RD5-35 need?
A: 5 V, typically supplied from a regulated 5 V BEC or the flight controller servo rail.
Q: Is there a light-sensor (LED) or CRSF version of the RD5-35?
A: No. The RD5-35 is a PWM-triggered unit. FlySpark light-sensor and CRSF droppers are available in other models of the range.
Q: What is the difference between the 35RD5-PWM and 35RD5-SQ variants?
A: Both use the same 5 V PWM revolver, 180 × 110 × 165 mm and approximately 300 g. The SQ variant is the quick-release version, so the dropper can be clipped on and off the aircraft without tools between sorties.
Q: Is the aircraft-side quick-release seat included?
A: The dropper-side quick-release seat is a free upgrade. The aircraft-side seat is sold separately and must be ordered for each airframe that will carry the dropper.
Q: Which drones are compatible with the RD5-35?
A: It is intended for FPV-class drones and custom-built multirotors, and for DJI M350-class enterprise drones fitted with a suitable payload rail adapter. Check the aircraft’s spare payload capacity, centre of gravity and a free PWM output before ordering.
Q: How much does the RD5-35 add to take-off weight?
A: The dropper weighs approximately 300 g, plus the aircraft-side quick-release seat and the payloads. Recalculate all-up weight and centre of gravity and confirm hover margin before operational flights.
Q: What are the RD5-35 dimensions?
A: 180 × 110 × 165 mm overall (width × depth × height), including the top mounting plate.
Q: What is the RD5-35 price in India?
A: Price is on request because each order is matched to the aircraft, mounting and payload. Contact FlySpark on WhatsApp or email for a quotation in INR or for export.
Q: What is the lead time, and do you export?
A: Lead time is confirmed with the quotation. FlySpark supplies across India and handles export enquiries subject to end-user verification, export-control rules and the documentation required by the destination country.
Q: Who can buy the RD5-35?
A: It is supplied only to verified end users such as defence and government agencies, public-safety organisations and professional integrators. FlySpark may request end-user and end-use documentation before supply.
Q: Can the RD5-35 be used to carry weapons?
A: The RD5-35 is supplied as a payload release mechanism for lawful payloads. Any other payload integration is the sole responsibility of the authorised end user, must comply with national law, airspace rules and procurement regulations, and is subject to export controls.
Q: Can it be used for search and rescue?
A: Yes. It can deliver up to five small rescue capsules, marker canisters or beacons sized to the 35 mm class, one position at a time, to people in difficult terrain or on water.
Q: How does the RD5-35 compare with the LD series parallel racks?
A: The LD series carries the same 35 mm payload class in flat parallel racks of 2, 4, 6 or 8 channels (94 to 244 mm long, 52 mm tall). The RD5-35 packs 5 positions into a compact 180 × 110 × 165 mm rotary block that suits a single central mounting point.
Q: Can the release logic be customised?
A: Channel mapping, PWM endpoints and failsafe behaviour are set at commissioning. Any multi-drop sequencing beyond one position per command is discussed and confirmed with FlySpark at configuration.
A: Warranty covers manufacturing defects for 1 year under approved use and normal operating conditions. Crash damage, overload, wrong supply voltage or unauthorised modification may not be covered.
Missionskonfigurationen
Konfiguration (2)
Select your operational configuration. Pricing may vary — request a formal quote for deployment quantities.
Standard 5-position revolver dropper for 35 mm-class cylindrical payloads, 5V PWM trigger, approx. 300g.
SKU: FSP-DRP-RD5-35-PWM
Unit Price (EUR, ab Werk)POAAvailable
Quick-release version with dropper-side quick-release seat; aircraft-side seat sold separately. 5V PWM, approx. 300g.
Supplied only to verified end users for lawful payloads
Airspace & approvals
Buyer responsible for airspace permissions and operating approvals
Export control
Export subject to end-user verification and applicable export-control rules
Flight safety
Never fly over or release payloads over people
Warranty
1 Year manufacturing defect support under approved use and normal operating conditions
Supplier
FlySpark / AnuShakti Infotech Pvt. Ltd.
Häufig gestellte Fragen
How does the RD5-35 revolver dropper work?
Payloads sit in a five-position rotary wheel. Each PWM command indexes the wheel one position and the payload falls clear at the release gate, while the others stay seated for later commands.
What size payloads fit the RD5-35?
35 mm-class cylindrical payloads. FlySpark confirms payload fit for the end user's approved payload.
How is the RD5-35 wired?
With a 3-wire servo-style lead (+5 V, GND, PWM) to a flight-controller or receiver auxiliary channel. Light-sensor and CRSF versions are not offered for this model.
What is the difference between 35RD5-PWM and 35RD5-SQ?
Both are 5 V PWM units of the same size and weight; the SQ version is the quick-release build. The dropper-side quick-release seat is a free upgrade and the aircraft-side seat is sold separately.
Can FlySpark export the FlySpark RD5-35 5-Position Revolver Drone Payload Dropper internationally?
Yes. The FlySpark RD5-35 5-Position Revolver Drone Payload Dropper ships to defense, security, and critical-infrastructure buyers in our 10 export markets and other authorized destinations, with full export documentation — end-user certification, dual-use classification, and destination-specific compliance handled before dispatch.
What configurations of the FlySpark RD5-35 5-Position Revolver Drone Payload Dropper are available?
The FlySpark RD5-35 5-Position Revolver Drone Payload Dropper is offered in 2 configurations so you can match range, payload, and integration requirements. Custom builds are available for volume orders.
Do you provide technical support and documentation for the FlySpark RD5-35 5-Position Revolver Drone Payload Dropper?
Every FlySpark RD5-35 5-Position Revolver Drone Payload Dropper order includes datasheets, integration guidance, and compliance paperwork. Our engineering team supports commissioning, spares, and field deployment.
How do I request a quote for the FlySpark RD5-35 5-Position Revolver Drone Payload Dropper?
Pricing for the FlySpark RD5-35 5-Position Revolver Drone Payload Dropper is quoted on request. Contact the export desk with your quantity and destination for a formal quote that includes export documentation, compliance handling, and freight.
Kann FlySpark FlySpark RD5-35 5-Position Revolver Drone Payload Dropper | 35 mm-Class Cylindrical Payloads, Rotary Release, PWM Trigger, 5 V, Approx. 300 g & Quick-Release Plate nach Deutschland exportieren?
Ja. FlySpark versendet nach Deutschland über die Luftfracht Indien → Europa-Route; die Transitzeit beträgt in der Regel 7–12 Tage. Für Counter-UAS- und RF-Artikel ist ein autorisierter Endnutzer erforderlich, und gegebenenfalls wird eine Einfuhrgenehmigung benötigt – wir kümmern uns um die Exportdokumentation.
Was kostet FlySpark RD5-35 5-Position Revolver Drone Payload Dropper | 35 mm-Class Cylindrical Payloads, Rotary Release, PWM Trigger, 5 V, Approx. 300 g & Quick-Release Plate in Deutschland?
Der Richtpreis beträgt Preis auf Anfrage (EUR, ab Werk Indien, umgerechnet von INR am 2026-11-20). Fracht, Versicherung und Deutschland Einfuhrzölle werden separat angegeben; das verbindliche Angebot erhalten Sie in EUR per WhatsApp oder E-Mail.
Wie lange dauert die Lieferung nach Deutschland?
Standardkonfigurationen werden innerhalb von 3–6 Wochen nach Auftragsbestätigung versandt; der Luftfrachttransport nach Deutschland dauert anschließend 7–12 Tage. Sonderanfertigungen und größere Mengen werden auf Anfrage terminiert.
publicKauf von FlySpark RD5-35 5-Position Revolver Drone Payload Dropper | 35 mm-Class Cylindrical Payloads, Rotary Release, PWM Trigger, 5 V, Approx. 300 g & Quick-Release Plate aus Deutschland
FlySpark exportiert FlySpark RD5-35 5-Position Revolver Drone Payload Dropper | 35 mm-Class Cylindrical Payloads, Rotary Release, PWM Trigger, 5 V, Approx. 300 g & Quick-Release Plate nach Deutschland von unserem Standort in Gandhinagar, Indien. Die Systeme werden über die Luftfracht Indien → Europa-Route versendet, die übliche Transitzeit beträgt nach Dokumentenfreigabe 7–12 Tage. Angebote werden in EUR (EXW Gandhinagar; DAP/CIF auf Anfrage) erstellt, und jede Sendung enthält eine Handelsrechnung, eine Packliste und ein Ursprungszeugnis.
Lieferzeit: 3–6 Wochen ab Werk, zuzüglich 7–12 Tage Transportzeit nach Deutschland
Einfuhrzölle und Mehrwertsteuer/GST in Deutschland sind vom Käufer zu entrichten; wir geben korrekte HS-Codes und Werte an.
Zahlung: Banküberweisung (TT) oder Akkreditiv; 50 % Anzahlung, Restzahlung vor Versand
Ferninbetriebnahme, Bedienerschulung und Ersatzteilversorgung in Deutschland per Videoanruf und Kurier
verified_userHF- und Drohnenabwehrgeräte werden ausschließlich an autorisierte Endnutzer geliefert. Je nach den Bestimmungen Deutschland können eine Einfuhrgenehmigung und eine Endbenutzerbescheinigung (EUC) erforderlich sein – unser Exportteam bereitet die entsprechenden Dokumente vor dem Versand gemeinsam mit Ihnen vor.
Global export · local pricing
FlySpark RD5-35 5-Position Revolver Drone Payload Dropper | 35 mm-Class Cylindrical Payloads, Rotary Release, PWM Trigger, 5 V, Approx. 300 g & Quick-Release Plate — priced in 15 country editions
FlySpark exports this system worldwide with end-user certification, dual-use classification, and destination-specific compliance. Open your country edition for indicative local pricing; the binding quote is issued on WhatsApp in your currency.