The FlySpark SDC is a multi-channel parallel drone payload dropper for compact ovoid payloads, available with 2, 4, 6 or 8 channels, with a dual safety lock on every payload position. It runs on a 7–28 V supply and can be triggered over CRSF (Crossfire/ELRS serial), PWM, a light sensor over the aircraft's auxiliary light, or a remote, releasing each channel individually. Weights range from about 160 g (SDC2) to 820 g (SDC8); price is on request.
The FlySpark SDC dual-lock multi-channel drone dropper is a parallel payload release system that carries 2, 4, 6 or 8 compact ovoid payloads under a multirotor and releases them on command. Every payload position is held by its own dual safety lock, the whole rack attaches through a quick-release plate, and the electronics accept a wide 7–28 V supply with CRSF, PWM, light-sensor or remote triggering. Four sizes cover the range from a 160 g two-channel unit for FPV-class drones to an 820 g eight-channel rack for DJI M350-class enterprise aircraft.
FlySpark SDC dual-lock multi-channel drone dropper product overview videoFlySpark SDC6 dual-lock multi-channel drone dropper with six empty parallel cradles, central dual-lock spine and servo connector
The SDC is part of the FlySpark UAV Payload Droppers & Release Systems range, supplied and supported in India by AnuShakti Infotech Pvt. Ltd., with export enquiries handled subject to approvals. It is intended for defence and government users, public-safety agencies and professional integrators who need a repeatable, well-secured multi-payload release on a standard airframe.
Cradles are arranged in pairs either side of a central spine that carries the locking mechanism. The SDC2 measures 168 × 54 × 80 mm, the SDC4 168 × 108 × 93 mm, the SDC6 168 × 162 × 93 mm and the SDC8 215 × 168 × 100 mm, with approximate weights of 160, 370, 580 and 820 g. Each variant is available as a CRSF version or an SQ quick-release version; the dropper-side quick-release seat is supplied as a free upgrade, while the aircraft-side quick-release plate is ordered separately.
FlySpark SDC drone dropper dimensions drawing – SDC2 168 × 54 × 80 mm, SDC4 168 × 108 × 93 mm, SDC6 168 × 162 × 93 mm, SDC8 215 × 168 × 100 mm
WHY CHOOSE THE SDC MULTI-CHANNEL DRONE DROPPER
Two locks per channel mean a payload is not held by a single latch, which matters on airframes that vibrate hard or manoeuvre aggressively. The parallel layout keeps the load compact and close to the aircraft’s centre of gravity, and the quick-release plate lets crews reload on the bench and swap a fresh rack onto the drone in seconds. One wide supply range and four trigger options mean the same dropper family can serve an ELRS-equipped FPV-class quadcopter and an enterprise multirotor without redesign.
FlySpark SDC2 vs SDC4 vs SDC6 vs SDC8 multi-channel drone dropper variant comparison – channels, dimensions and weights
The SDC controller reads a release command and opens both locks of the selected channel, letting that payload fall clear while the others stay secured. On FPV-class and custom-built drones the command normally arrives as CRSF serial data from a Crossfire / ELRS receiver or as a PWM servo signal from a receiver or flight-controller output. On enterprise aircraft the light-sensor trigger sits over the drone’s bottom auxiliary light, so the pilot releases a payload by toggling that light from the flight app with no signal wiring into the aircraft. A dedicated remote trigger is also available. Channels are released individually, and the mapping is set up on the transmitter or trigger during integration.
FlySpark SDC drone payload release trigger and wiring diagram – CRSF, PWM, light sensor or remote trigger to dual-lock channelsFlySpark SDC6 multi-channel drone dropper close-up of the central dual-lock spine, latch arms and cup cradles – dual safety lock on every payload position
COMPATIBLE AIRCRAFT & MOUNTING
The SDC is designed for FPV-class 7–10 inch quadcopters and custom-built multirotors, and for DJI M350-class enterprise drones. An aircraft-side quick-release plate (sold separately) is fixed to the drone once; the dropper-side seat on the SDC slides onto it and latches, so the rack can be removed for reloading or exchanged for a different channel count. Power comes from the aircraft’s battery or power port within the 7–28 V range. Always confirm the aircraft’s rated payload, centre of gravity and power budget for the loaded weight.
FlySpark SDC drone dropper quick-release mounting stack and compatibility with FPV-class and DJI M350-class dronesFlySpark SDC6 multi-channel drone dropper on a rugged field case with tablet and tools during pre-flight next to a DJI M350-class enterprise droneFlySpark SDC2 drone dropper mounted under a 10-inch FPV-class quadcopter carrying two orange rescue-marker capsules over hillsFlySpark SDC multi-channel drone dropper on a DJI M350-class enterprise drone over a field training ground with inert capsules
VARIANTS
• FlySpark SDC2 – 2 channels, 168 × 54 × 80 mm, approx. 160 g, 7–28 V, CRSF or SQ
• FlySpark SDC4 – 4 channels, 168 × 108 × 93 mm, approx. 370 g, 7–28 V, CRSF or SQ
• FlySpark SDC6 – 6 channels, 168 × 162 × 93 mm, approx. 580 g, 7–28 V, CRSF or SQ
• FlySpark SDC8 – 8 channels, 215 × 168 × 100 mm, approx. 820 g, 7–28 V, CRSF or SQ
FlySpark SDC6 drone dropper top view showing two rows of three cradles and the central dual-lock spine
DEFENCE & MILITARY APPLICATIONS
For armed forces, paramilitary units and government security agencies, the SDC gives a secure multi-payload release for training, signalling, sensor emplacement and resupply tasks from a standard drone.
• Marker and screening smoke capsule release for training and signalling
• Inert training payload drops for aircrew and drone-operator qualification
• Sensor, beacon and relay emplacement in denied or hard-to-reach terrain
• Perimeter-sensor seeding along borders and installations
• Emergency resupply to forward posts: tourniquet kits, batteries, radios, water purification tabs
• Decoy and reflector release for exercise and evaluation
• EOD and CBRN team training with inert dummy payloads
• Search and rescue of personnel with marker and locator capsules
• Integration of other authorised payloads by the end user in accordance with national law and procurement rules
CIVILIAN & COMMERCIAL APPLICATIONS
For emergency services, utilities, agriculture and research, the SDC turns an FPV-class or enterprise multirotor into a precise multi-drop delivery tool.
• Search and rescue drops of compact radios, flotation aids and medical kits
• Utility pilot-line drops for power-line stringing
• Firefighting extinguisher-ball drops where the payload size fits the cradles
• Agriculture: seed balls and bio-control capsules over fields and plantations
• Fishing bait release
• Wildlife research: tags, sample containers and sensor capsules
• Mountain and maritime rescue marker and locator drops
• Events and demonstrations with lightweight novelty payloads
• University and research-lab payload-release experiments
FlySpark SDC drone payload release system dropping an orange flotation marker from an M350-class enterprise drone during flood relief
COMPARE THE FLYSPARK DROPPER RANGE
The SDC is the dual-lock parallel option in the FlySpark dropper range, chosen when several compact ovoid payloads must be carried securely on one sortie. Lighter single and dual-channel units suit small camera drones, while dedicated racks cover cylindrical payloads and smoke canisters.
• FlySpark 60WD series – mechanical-latch droppers for Ø60 mm-class cylindrical payloads with TPU damping
• FlySpark M18SD series – parallel racks for M18-class smoke canisters on FPV-class and M350-class drones
FlySpark SDC drone dropper side view showing cradle walls, latch arms and the end-plate servo connector
STANDARD SUPPLY
• FlySpark SDC dropper (SDC2, SDC4, SDC6 or SDC8) in the ordered CRSF or SQ version
• Dropper-side quick-release seat (free upgrade)
• Power and trigger lead for the ordered version
• Wiring, channel-mapping and loading guidance
• Aircraft-side quick-release plate sold separately
IMPORTANT USE NOTE
The SDC is supplied only to verified end users. The buyer is responsible for using only lawful payloads, obtaining all airspace permissions and complying with export controls and local regulations. Payload fit is confirmed by FlySpark for the end user’s approved payload. Never fly over people or release over people, respect the aircraft’s rated payload, and ground-test every channel before flight.
FREQUENTLY ASKED QUESTIONS
Q: What is a multi-channel drone dropper?
A: A multi-channel drone dropper (drone payload release system) is a rack fitted under a multirotor that holds several payloads in separate positions and releases each one on command. The FlySpark SDC holds 2, 4, 6 or 8 compact ovoid payloads in parallel cradles, each secured by its own dual safety lock.
Q: What is the FlySpark SDC?
A: The FlySpark SDC is a dual-lock multi-channel parallel drone dropper offered in four sizes — SDC2, SDC4, SDC6 and SDC8 — with quick-release plate mounting, a 7–28 V supply and CRSF, PWM, light-sensor or remote triggering. It is built for FPV-class drones and DJI M350-class enterprise multirotors.
Q: What does “dual-lock” mean on the SDC?
A: Every payload position is held by two independent locks (a dual safety lock), so a single latch is not the only thing retaining the payload in flight. Both locks must open for that channel to release.
Q: What are the dimensions and weights of each SDC variant?
A: SDC2: 168 × 54 × 80 mm, approx. 160 g. SDC4: 168 × 108 × 93 mm, approx. 370 g. SDC6: 168 × 162 × 93 mm, approx. 580 g. SDC8: 215 × 168 × 100 mm, approx. 820 g.
Q: What payloads does the SDC carry?
A: The SDC is sized for compact ovoid payloads such as inert training capsules, marker and signalling capsules, small beacons and compact resupply items. Payload fit is confirmed by FlySpark for the end user’s approved payload before supply.
Q: What supply voltage does the SDC need?
A: All four variants accept 7–28 V, so they can be powered from the aircraft battery or a regulated power port on most FPV-class and enterprise multirotors.
Q: How is a release triggered?
A: The SDC accepts a CRSF (Crossfire / ELRS serial) command, a PWM servo signal from a receiver or flight controller, a light-sensor trigger placed over the aircraft’s bottom auxiliary light, or a dedicated remote trigger. The ordered version is CRSF or SQ (quick-release); FlySpark confirms the trigger setup with the quotation.
Q: What is the difference between the CRSF and SQ versions?
A: The CRSF version is commanded over the Crossfire / ELRS serial link from the aircraft’s receiver. The SQ version is the quick-release configuration intended to click on and off an aircraft-side quick-release plate. The dropper body, channel count and dual-lock mechanism are the same.
Q: Is the aircraft-side quick-release plate included?
A: No. The aircraft-side quick-release plate is sold separately. The dropper-side quick-release seat is supplied as a free upgrade with the dropper.
Q: Which drones is the SDC compatible with?
A: FPV-class 7–10 inch quadcopters and custom-built multirotors, and DJI M350-class enterprise drones. The lighter SDC2 and SDC4 suit FPV-class airframes; the SDC6 and SDC8 are normally paired with M350-class aircraft. Always check the aircraft’s rated payload and centre of gravity.
Q: Can I use the SDC on a DJI Matrice 350 without wiring into the aircraft?
A: Yes, with the light-sensor trigger: the optical sensor sits over the aircraft’s bottom auxiliary light and the light is toggled from the pilot app, so no signal wiring into the aircraft is needed. The dropper still needs a 7–28 V supply.
Q: Can the channels be released one at a time?
A: Yes. Each channel has its own dual lock and can be released individually on command; the channel mapping is set up on the transmitter or trigger during integration.
Q: Which SDC variant should I choose?
A: Choose by payload count and aircraft capacity: SDC2 (160 g) for light FPV-class airframes, SDC4 (370 g) for heavier FPV-class or medium multirotors, and SDC6 (580 g) or SDC8 (820 g) for M350-class enterprise drones.
Q: What is the drone dropper price in India?
A: Price is on request. Each SDC is quoted by channel count, version (CRSF or SQ), trigger setup and accessories. Contact FlySpark on WhatsApp or email for a quotation in INR or for export.
Q: What is the lead time, and do you export?
A: Lead time is confirmed with the quotation. FlySpark supplies across India and handles export enquiries subject to export-control approvals and end-user documentation.
Q: Who can buy the SDC?
A: The SDC is supplied only to verified end users such as defence and government agencies, public-safety organisations, professional integrators, research institutions and licensed commercial operators.
Q: Can the SDC be used to carry weapons?
A: FlySpark supplies the SDC as a payload release device for lawful uses such as training, signalling, sensor emplacement, rescue and resupply. Integration of any other authorised payload is the end user’s responsibility and must comply with national law, export controls and procurement rules.
Q: Does FlySpark help with integration?
A: Yes. FlySpark / AnuShakti Infotech Pvt. Ltd. advises on aircraft matching, power and trigger wiring, CRSF or PWM channel mapping, light-sensor placement, ground testing and operator familiarisation.
Q: How do I load the SDC?
A: With the dropper off the aircraft, place each payload in its cradle and close both locks, then slide the dropper onto the aircraft-side plate until it latches. Ground-test every channel before flight.
Q: What warranty is included?
A: Warranty covers manufacturing defects for 1 year under approved use and normal operating conditions. Damage from crashes, overload, wrong supply voltage or unauthorised modification may not be covered.
Mission configurations
Configuration (4)
Select your operational configuration. Pricing may vary — request a formal quote for deployment quantities.
Two dual-lock payload positions, 7–28 V, CRSF or SQ version. Suited to FPV-class drones. Aircraft-side quick-release plate sold separately.
SKU: FSP-DRP-SDC-2CH
Unit Price (CAD, ex-works)POAAvailable
Four dual-lock payload positions, 7–28 V, CRSF or SQ version. For heavier FPV-class or medium multirotors. Aircraft-side quick-release plate sold separately.
SKU: FSP-DRP-SDC-4CH
Unit Price (CAD, ex-works)POAAvailable
Six dual-lock payload positions, 7–28 V, CRSF or SQ version. Typically paired with DJI M350-class aircraft. Aircraft-side quick-release plate sold separately.
SKU: FSP-DRP-SDC-6CH
Unit Price (CAD, ex-works)POAAvailable
Eight dual-lock payload positions, 7–28 V, CRSF or SQ version. For DJI M350-class enterprise drones. Aircraft-side quick-release plate sold separately.
SKU: FSP-DRP-SDC-8CH
Unit Price (CAD, ex-works)POAAvailable
Active configuration
FlySpark SDC2 2-Channel Dual-Lock Dropper – 168 × 54 × 80 mm, approx. 160 g
Two dual-lock payload positions, 7–28 V, CRSF or SQ version. Suited to FPV-class drones. Aircraft-side quick-release plate sold separately.
POA
CAD · indicative ex-works
SKU: FSP-DRP-SDC-2CH
Configuration matrix
Compare all variants
Side-by-side specifications — click a column to select
SDC2 / SDC4 on FPV-class airframes; SDC6 / SDC8 on M350-class aircraft
settingsStandard Supply 2
Included
SDC dropper in the ordered version, dropper-side quick-release seat, power / trigger lead, integration guidance
Sold Separately
Aircraft-side quick-release plate
settingsSafety & Compliance 6
Supply Restriction
Supplied only to verified end users
Lawful Use
Buyer responsible for lawful payloads, airspace permissions and export controls
Flight Safety
Never fly over or release over people; respect the aircraft’s rated payload
Pre-Flight
Ground-test every channel before flight
Warranty
1 Year manufacturing defect support under approved use and normal operating conditions
Supplier
FlySpark / AnuShakti Infotech Pvt. Ltd.
Frequently asked questions
What is the dual lock on the SDC dropper?
Every payload position is held by two locks rather than a single latch, which helps on airframes that vibrate hard or manoeuvre aggressively.
What voltage does the SDC need?
A 7–28 V supply, so it can run from typical FPV and enterprise drone power rails.
Which trigger signals does the SDC accept?
CRSF serial from a Crossfire or ExpressLRS receiver, a PWM servo signal, a light sensor placed over the aircraft's bottom auxiliary light, or a remote. Channel mapping is set during integration.
Which SDC size suits which drone?
FlySpark pairs the SDC2 and SDC4 with FPV-class airframes and the SDC6 and SDC8 with DJI M350-class aircraft.
What is included with the SDC?
The dropper in the ordered version, a dropper-side quick-release seat, a power/trigger lead and integration guidance. The aircraft-side quick-release plate is sold separately.
Can FlySpark export the FlySpark SDC Dual-Lock Multi-Channel Drone Dropper internationally?
Yes. The FlySpark SDC Dual-Lock Multi-Channel Drone Dropper ships to defense, security, and critical-infrastructure buyers in our 10 export markets and other authorized destinations, with full export documentation — end-user certification, dual-use classification, and destination-specific compliance handled before dispatch.
What configurations of the FlySpark SDC Dual-Lock Multi-Channel Drone Dropper are available?
The FlySpark SDC Dual-Lock Multi-Channel Drone Dropper is offered in 4 configurations so you can match range, payload, and integration requirements. Custom builds are available for volume orders.
Do you provide technical support and documentation for the FlySpark SDC Dual-Lock Multi-Channel Drone Dropper?
Every FlySpark SDC Dual-Lock Multi-Channel Drone Dropper order includes datasheets, integration guidance, and compliance paperwork. Our engineering team supports commissioning, spares, and field deployment.
How do I request a quote for the FlySpark SDC Dual-Lock Multi-Channel Drone Dropper?
Pricing for the FlySpark SDC Dual-Lock Multi-Channel Drone Dropper is quoted on request. Contact the export desk with your quantity and destination for a formal quote that includes export documentation, compliance handling, and freight.
Yes. FlySpark ships to Canada on the India → North America air freight lane; transit is typically 8–14 days. Counter-UAS and RF items require an authorized end user and may need an import permit — we handle the export documentation with you.
What does FlySpark SDC Dual-Lock Multi-Channel Drone Dropper | 2/4/6/8-Channel Parallel Payload Release, Dual Safety Lock, Quick-Release Plate, 7–28 V & CRSF / PWM / Light-Sensor / Remote Trigger cost in Canada?
The indicative price is Quote on request (CAD, ex-works India, converted from INR on 2026-11-20). Freight, insurance and Canada import duties are quoted separately; the formal offer is issued in CAD on WhatsApp or email.
How long does delivery to Canada take?
Standard configurations ship in 3–6 weeks after order confirmation; air freight to Canada then takes 8–14 days. Custom builds and larger quantities are scheduled at quotation.
FlySpark exports FlySpark SDC Dual-Lock Multi-Channel Drone Dropper | 2/4/6/8-Channel Parallel Payload Release, Dual Safety Lock, Quick-Release Plate, 7–28 V & CRSF / PWM / Light-Sensor / Remote Trigger to Canada from our facility in Gandhinagar, India. Systems ship on the India → North America air freight lane with a typical transit time of 8–14 days once documentation clears. Quotes are issued in CAD (EXW Gandhinagar; DAP/CIF on request), and every shipment includes a commercial invoice, packing list and certificate of origin.
Lead time: 3–6 weeks ex-works, plus 8–14 days transit to Canada
Import duty and VAT/GST in Canada are payable by the buyer; we declare accurate HS codes and values
Payment: bank transfer (TT) or letter of credit; 50% advance, balance before dispatch
Remote commissioning, operator training and spares support in Canada via video call and courier
verified_userRF and counter-UAS equipment is supplied to authorized end users only. Depending on Canada regulations an import permit and an end-user certificate (EUC) may be required — our export desk prepares the paperwork with you before dispatch.
FlySpark exports this system worldwide with end-user certification, dual-use classification, and destination-specific compliance. Open your country edition for indicative local pricing; the binding quote is issued on WhatsApp in your currency.