The FlySpark M18SD is a parallel-rack drone payload dropper that carries 2, 4, 6 or 8 M18-class smoke canisters, each in its own holder cup with an individual latch, and releases them on command. All variants are 200 mm wide and 160 mm high, run on 5 V and accept PWM, light-sensor or remote-control triggering, with quick-release plate mounting. The smaller variants suit heavy-lift FPV-class frames and the 6- and 8-channel versions are matched to DJI Matrice M350-class multirotors.
FlySpark M18SD Multi-Channel Smoke-Canister Dropper is a parallel-rack UAV payload release system that carries 2, 4, 6 or 8 M18-class smoke canisters under a single drone and releases them on command. Each canister sits in its own holder cup with an individual latch on a central spine, so one sortie can mark several drop zones, landing zones or rescue locations without returning to reload.
FlySpark M18SD multi-channel smoke-canister dropper product overview videoFlySpark M18SD8 8-channel smoke-canister drone dropper, empty, two rows of holder cups on a central latch spine
The M18SD is part of the FlySpark UAV Payload Droppers & Release Systems range, supplied and supported in India by AnuShakti Infotech Pvt. Ltd., with export enquiries welcome from verified end users.
All four sizes share a 200 mm width, a 160 mm height and a 5 V supply. Length grows with channel count: 67 mm for the 2-channel M18SD2 (approx. 200 g), 133 mm for the M18SD4 (approx. 490 g), 200 mm for the M18SD6 (approx. 700 g) and 267 mm for the 8-channel M18SD8 (approx. 900 g). The dropper accepts a PWM signal, a light-sensor trigger or a remote-control trigger, and mounts through a quick-release plate. The dropper-side quick-release seat is supplied as a free upgrade; the aircraft-side plate is sold separately.
Single-channel droppers limit each flight to one marker. The M18SD puts up to eight M18-class smoke canisters on one aircraft in a compact parallel rack, so a single flight can mark a series of points, signal several teams or place supplies along a route. Because every variant keeps the same 200 × 160 mm cross-section and the same 5 V trigger interface, operators can move between channel counts without retraining or rewiring, and choose the size that matches the aircraft’s payload capacity.
• Parallel-rack multi-channel dropper for M18-class smoke canisters
• Four sizes: 2, 4, 6 or 8 channels (M18SD2 / M18SD4 / M18SD6 / M18SD8)
• Common 200 mm width and 160 mm height across the series
• Length 67 / 133 / 200 / 267 mm by channel count
• Approx. weight 200 / 490 / 700 / 900 g
• 5 V operating voltage
• PWM, light-sensor or remote-control trigger
• Light-sensor option needs no connection to aircraft wiring
• Quick-release plate mounting (SQ version)
• Dropper-side quick-release seat supplied as a free upgrade
• Aircraft-side quick-release plate available separately
• Suits heavy-lift FPV-class drones and DJI M350-class multirotors
• Individual holder cup and latch per channel
• Payload fit confirmed by FlySpark for the approved payload
FlySpark M18SD8 multi-channel dropper loaded with orange inert training cylinders in all eight holder cups
HOW IT WORKS
The release controller reads one trigger input and drives the latch on each holder cup. With a PWM trigger, a servo output on the flight controller or receiver commands the release. With the light-sensor trigger, an optical sensor is fixed over the aircraft’s bottom auxiliary light; switching that light from the flight app commands the release, with no connection to the aircraft’s wiring. With the remote-control trigger, a switch on the pilot’s transmitter is mapped to the release channel. FlySpark sets up and confirms the release sequence and channel mapping for the chosen trigger mode and aircraft before delivery.
FlySpark M18SD dropper trigger options – PWM from flight controller, light-sensor over auxiliary light, or remote-control channelFlySpark M18SD multi-channel smoke-canister dropper close-up of the central latch spine, screwed top plates and slotted holder cups
COMPATIBLE AIRCRAFT & MOUNTING
The M18SD is intended for heavy-lift FPV-class drones and custom multirotors, and for DJI Matrice M350-class enterprise multirotors. The M18SD2 and M18SD4 suit most heavy-lift FPV-class frames using PWM or remote-control triggering. The M18SD6 and M18SD8 are matched to M350-class aircraft, where the light-sensor trigger over the bottom auxiliary light avoids any modification to the airframe. Mounting is through a quick-release plate: the dropper-side seat is a free upgrade and the aircraft-side plate is ordered to suit the airframe. Always check that the dropper weight plus the loaded canisters stays within the aircraft’s rated payload and centre-of-gravity limits.
FlySpark M18SD quick-release mounting stack and compatibility with FPV-class and DJI M350-class dronesFlySpark M18SD4 4-channel dropper under a heavy-lift FPV-class quadcopter during a search-and-rescue exerciseFlySpark M18SD8 smoke-canister dropper loaded with orange inert training cylinders on a rugged field case during pre-flight checks before fitting to an M350-class drone
M18SD VARIANTS AND DIMENSIONS
• M18SD2-PWM/SQ – 2 channels, 67 × 200 × 160 mm, approx. 200 g
• M18SD4-PWM/SQ – 4 channels, 133 × 200 × 160 mm, approx. 490 g
• M18SD6-PWM/SQ – 6 channels, 200 × 200 × 160 mm, approx. 700 g
• M18SD8-PWM/SQ – 8 channels, 267 × 200 × 160 mm, approx. 900 g
FlySpark M18SD drone dropper dimensions drawing – 67 / 133 / 200 / 267 × 200 × 160 mm, approx. 200 / 490 / 700 / 900 gFlySpark M18SD8 smoke-canister dropper top view showing eight holder cups either side of the latch spine
DEFENCE & MILITARY APPLICATIONS
For armed forces, paramilitary units and government security agencies, the M18SD turns a drone into a multi-point marking and signalling tool for training, rescue and logistics tasks, keeping personnel out of exposed ground while placing smoke exactly where it is needed.
• Marker and screening smoke for training areas, drop zones and helicopter landing zones
• Signalling and position marking for patrols, convoys and ground teams
• Inert training payload drops for UAV operator qualification
• Sensor, beacon and relay emplacement at remote observation points
• Emergency resupply of small items: tourniquet kits, batteries, radios and water purification tabs
• Decoy and reflector release during exercises
• Mothership deployment of small payloads from a larger multirotor
• EOD and CBRN team training with marker smoke and inert items
• Perimeter-sensor seeding along borders and installations
• Search and rescue of personnel with smoke marking of casualty locations
• Integration of other authorised payloads by the end user in accordance with national law and procurement rules
FlySpark M18SD drone dropper under a DJI M350-class enterprise quadcopter marking a landing zone with green smoke
CIVILIAN & COMMERCIAL APPLICATIONS
For public-safety services, utilities, researchers and professional operators, the M18SD provides repeatable, multi-point drops of small items and visible smoke signals from one aircraft.
• Search and rescue drops of radios, flotation aids and medical kits, with smoke marking for ground teams
• Mountain and maritime rescue signalling over terrain and open water
• Utility pilot-line drops for power-line stringing
• Firefighting support: wind-direction smoke and small extinguisher-ball drops where size fits
• Agriculture: seed balls and bio-control capsules
• Fishing bait release
• Wildlife research: tag, sampler and sensor placement
• Events and film production smoke effects in controlled areas
• University and research UAV payload-release projects
FlySpark M18SD dropper on an M350-class drone releasing an orange signal canister during a maritime rescue exerciseFlySpark M18SD multi-channel dropper under an M350-class enterprise drone marking a casualty location with orange smoke during a snow mountain rescue
COMPARE THE FLYSPARK DROPPER RANGE
The M18SD is the multi-channel option for M18-class smoke canisters. For a single canister on a small aircraft, the M18ZD1 is lighter and simpler; for other payload size classes or heavier aircraft, the parallel-rack and hanging-rack series below cover the range.
• FlySpark M18ZD1 – single-channel dropper for one M18-class smoke canister on camera drones and FPV-class aircraft (48 × 48 × 88 mm, approx. 77 g)
• FlySpark SMOKER2 – compact smoke-generator release module for small aircraft (110 × 48 × 73 mm, approx. 91 g)
• FlySpark ZD4 / ZD6 / ZD8 – lightweight 4-, 6- and 8-channel CRSF droppers for FPV-class drones
• FlySpark SDC series – 2- to 8-channel parallel rack for compact ovoid payloads with dual safety lock, 7–28 V
• FlySpark LD35 series – 2- to 8-channel hanging rack for 35 mm-class cylindrical payloads with PWM or remote trigger
• FlySpark QD60 series – heavy 2- to 8-channel aluminium and carbon-fibre rack for Ø60 mm-class cylindrical payloads on large multirotors
STANDARD SUPPLY:
• FlySpark M18SD multi-channel dropper in the selected channel count (2, 4, 6 or 8)
• Dropper-side quick-release seat (free upgrade)
• Trigger lead for the selected PWM, light-sensor or remote-control mode
• Setup notes for trigger and channel mapping
• Operator manual and integration support
• Aircraft-side quick-release plate available separately
IMPORTANT USE NOTE:
The M18SD is supplied only to verified end users. The buyer is responsible for using lawful payloads only, obtaining all airspace permissions and complying with export-control and end-use regulations. Never fly over people, keep the release zone clear before every drop, stay within the aircraft’s rated payload and follow local aviation and safety rules. Payload fit is confirmed by FlySpark for the end user’s approved payload.
FREQUENTLY ASKED QUESTIONS:
Q: What is a multi-channel drone dropper?
A: A multi-channel drone dropper is a payload release system that carries several payloads on one aircraft and releases them on command, so a single sortie can place markers or supplies at more than one point. The FlySpark M18SD carries 2, 4, 6 or 8 M18-class smoke canisters in a parallel rack.
Q: What is the FlySpark M18SD?
A: The FlySpark M18SD is a parallel-rack, multi-channel UAV payload dropper built around M18-class smoke canisters. It runs on 5 V, accepts PWM, light-sensor or remote-control triggering and mounts to the aircraft through a quick-release plate.
Q: What payloads does the M18SD carry?
A: Each holder cup is sized for an M18-class smoke canister. Payload fit is confirmed by FlySpark for the end user’s approved payload before supply, and other items of similar size can be assessed on request.
Q: Which variants are available?
A: Four channel counts: M18SD2 (2 channels, 67 × 200 × 160 mm, approx. 200 g), M18SD4 (4 channels, 133 × 200 × 160 mm, approx. 490 g), M18SD6 (6 channels, 200 × 200 × 160 mm, approx. 700 g) and M18SD8 (8 channels, 267 × 200 × 160 mm, approx. 900 g).
Q: What do PWM and SQ mean in the model code?
A: PWM indicates the dropper accepts a standard PWM servo signal from a flight controller or receiver. SQ indicates the quick-release version, which mounts through a quick-release plate instead of fixed hardware.
Q: What voltage does the M18SD need?
A: All four variants operate on 5 V, which is available from most flight-controller servo rails, BECs and receiver outputs.
Q: How is a release triggered?
A: Three trigger options are supported: a PWM signal from the flight controller or receiver, a light-sensor trigger that reacts to the aircraft’s bottom auxiliary light, or a remote-control trigger from a transmitter channel. FlySpark confirms the release sequence and channel mapping for your aircraft and trigger mode.
Q: How does the light-sensor trigger work?
A: An optical sensor is fixed over the aircraft’s bottom auxiliary light. When the pilot switches that light from the flight app, the sensor detects it and commands the release, so no connection to the aircraft’s wiring is needed.
Q: Which drones is the M18SD compatible with?
A: It is intended for heavy-lift FPV-class drones and custom multirotors using PWM or remote-control triggering, and for DJI Matrice M350-class enterprise multirotors using the quick-release plate and light-sensor trigger. Always check the aircraft’s rated payload against the dropper weight plus the loaded canisters.
Q: Which size should I choose for an FPV-class drone?
A: The M18SD2 (approx. 200 g) and M18SD4 (approx. 490 g) are the practical choices for heavy-lift FPV-class frames. The M18SD6 and M18SD8 are better matched to M350-class enterprise aircraft with higher payload capacity.
Q: Is the quick-release plate included?
A: The dropper-side quick-release seat is supplied as a free upgrade. The aircraft-side quick-release plate is sold separately and is selected to suit your airframe.
Q: Can the M18SD be swapped between aircraft?
A: Yes. With an aircraft-side quick-release plate fitted to each airframe, the same dropper can be moved between aircraft that share the plate interface.
Q: What are the dimensions of the M18SD8?
A: The 8-channel M18SD8 measures 267 × 200 × 160 mm and weighs approximately 900 g without payload. All variants share the 200 mm width and 160 mm height; only the length changes with channel count.
Q: What is the M18SD drone dropper price in India?
A: Price is on request because the final configuration depends on channel count, trigger mode and the aircraft-side plate required. Contact FlySpark on WhatsApp or email for a quotation in INR or for export.
Q: What is the lead time, and do you export?
A: Lead time is confirmed with the quotation. FlySpark supplies across India and handles export enquiries subject to end-user verification and applicable export-control documentation.
Q: Who can buy the M18SD?
A: It is supplied only to verified end users such as defence and government agencies, public-safety organisations, professional integrators and approved commercial operators. FlySpark may request end-user documentation before supply.
Q: Can the M18SD carry other payloads?
A: It is designed for M18-class smoke canisters and items of similar size and weight such as inert training cylinders, beacons or compact supply pouches. Integration of any other authorised payload is the end user’s responsibility in accordance with national law and procurement rules.
Q: What are typical applications?
A: Marker and screening smoke, landing-zone and drop-zone marking, signalling, inert training drops, beacon and sensor placement, search-and-rescue marking, maritime rescue signalling and emergency resupply of small items.
Q: How does the M18SD compare with a single-channel dropper?
A: A single-channel unit such as the FlySpark M18ZD1 carries one M18-class canister on a small aircraft. The M18SD carries 2 to 8 canisters in one rack, so one flight can mark or supply several locations.
A: Warranty covers manufacturing defects for 1 year under approved use and normal operating conditions. Damage from crashes, overload, incorrect wiring or voltage, or unauthorised modification may not be covered.
Mission configurations
Configuration (4)
Select your operational configuration. Pricing may vary — request a formal quote for deployment quantities.
Supplied only to verified end users; lawful payloads only
Airspace
Buyer responsible for airspace permissions and local aviation rules
Export control
Buyer responsible for export-control and end-use compliance
Flight safety
Never fly over people; stay within the aircraft’s rated payload
Warranty
1 Year manufacturing defect support under approved use and normal operating conditions
Supplier
FlySpark / AnuShakti Infotech Pvt. Ltd.
Frequently asked questions
How many smoke canisters can the M18SD carry?
Two, four, six or eight M18-class canisters depending on the variant (M18SD2, M18SD4, M18SD6 or M18SD8).
What are the M18SD dimensions and weights?
All variants are 200 mm wide and 160 mm high. Length and approximate weight are 67 mm / 200 g (2-channel), 133 mm / 490 g (4-channel), 200 mm / 700 g (6-channel) and 267 mm / 900 g (8-channel).
How is the M18SD triggered?
By a PWM servo signal from the flight controller or receiver, by a light sensor placed over the aircraft's bottom auxiliary light (no aircraft wiring needed), or by a remote-control channel.
Which M18SD variant fits a DJI M350-class drone?
FlySpark matches the M18SD6 and M18SD8 to M350-class aircraft, using the quick-release plate and the light-sensor trigger. The M18SD2 and M18SD4 suit most heavy-lift FPV-class frames.
What is supplied with the M18SD?
The dropper in the chosen channel count, a dropper-side quick-release seat, a trigger lead for the selected mode, setup notes and an operator manual. The aircraft-side quick-release plate is sold separately.
Can FlySpark export the FlySpark M18SD Multi-Channel Smoke-Canister Drone Dropper internationally?
Yes. The FlySpark M18SD Multi-Channel Smoke-Canister Drone Dropper ships to defense, security, and critical-infrastructure buyers in our 10 export markets and other authorized destinations, with full export documentation — end-user certification, dual-use classification, and destination-specific compliance handled before dispatch.
What configurations of the FlySpark M18SD Multi-Channel Smoke-Canister Drone Dropper are available?
The FlySpark M18SD Multi-Channel Smoke-Canister Drone Dropper is offered in 4 configurations so you can match range, payload, and integration requirements. Custom builds are available for volume orders.
Do you provide technical support and documentation for the FlySpark M18SD Multi-Channel Smoke-Canister Drone Dropper?
Every FlySpark M18SD Multi-Channel Smoke-Canister Drone Dropper order includes datasheets, integration guidance, and compliance paperwork. Our engineering team supports commissioning, spares, and field deployment.
How do I request a quote for the FlySpark M18SD Multi-Channel Smoke-Canister Drone Dropper?
Pricing for the FlySpark M18SD Multi-Channel Smoke-Canister Drone Dropper is quoted on request. Contact the export desk with your quantity and destination for a formal quote that includes export documentation, compliance handling, and freight.
Can FlySpark export FlySpark M18SD Multi-Channel Smoke-Canister Drone Dropper | 2/4/6/8-Channel Parallel Rack for M18-Class Canisters, 5V, PWM / Light-Sensor / Remote Trigger, Quick-Release Plate & 200–900g to Canada?
Yes. FlySpark ships to Canada on the India → North America air freight lane; transit is typically 8–14 days. Counter-UAS and RF items require an authorized end user and may need an import permit — we handle the export documentation with you.
What does FlySpark M18SD Multi-Channel Smoke-Canister Drone Dropper | 2/4/6/8-Channel Parallel Rack for M18-Class Canisters, 5V, PWM / Light-Sensor / Remote Trigger, Quick-Release Plate & 200–900g cost in Canada?
The indicative price is Quote on request (CAD, ex-works India, converted from INR on 2026-11-20). Freight, insurance and Canada import duties are quoted separately; the formal offer is issued in CAD on WhatsApp or email.
How long does delivery to Canada take?
Standard configurations ship in 3–6 weeks after order confirmation; air freight to Canada then takes 8–14 days. Custom builds and larger quantities are scheduled at quotation.
FlySpark exports FlySpark M18SD Multi-Channel Smoke-Canister Drone Dropper | 2/4/6/8-Channel Parallel Rack for M18-Class Canisters, 5V, PWM / Light-Sensor / Remote Trigger, Quick-Release Plate & 200–900g to Canada from our facility in Gandhinagar, India. Systems ship on the India → North America air freight lane with a typical transit time of 8–14 days once documentation clears. Quotes are issued in CAD (EXW Gandhinagar; DAP/CIF on request), and every shipment includes a commercial invoice, packing list and certificate of origin.
Lead time: 3–6 weeks ex-works, plus 8–14 days transit to Canada
Import duty and VAT/GST in Canada are payable by the buyer; we declare accurate HS codes and values
Payment: bank transfer (TT) or letter of credit; 50% advance, balance before dispatch
Remote commissioning, operator training and spares support in Canada via video call and courier
verified_userRF and counter-UAS equipment is supplied to authorized end users only. Depending on Canada regulations an import permit and an end-user certificate (EUC) may be required — our export desk prepares the paperwork with you before dispatch.
Global export · local pricing
FlySpark M18SD Multi-Channel Smoke-Canister Drone Dropper | 2/4/6/8-Channel Parallel Rack for M18-Class Canisters, 5V, PWM / Light-Sensor / Remote Trigger, Quick-Release Plate & 200–900g — priced in 15 country editions
FlySpark exports this system worldwide with end-user certification, dual-use classification, and destination-specific compliance. Open your country edition for indicative local pricing; the binding quote is issued on WhatsApp in your currency.