FlySpark LD35 Multi-Channel Hanging Drone Payload Dropper | 2/4/6/8-Channel Parallel Release, 35 mm-Class Cylindrical Payloads, Quick-Release Plate, PWM / Remote Trigger, 5 V & Single or Half-Load Salvo — available for export to Australia. Indicative price Quote on request (AUD, ex-works). Formal quote, lead time and end-user documentation on WhatsApp.
The FlySpark LD35 is a hanging, parallel-rack drone payload dropper for 35 mm-class cylindrical payloads, offered in 2-, 4-, 6- and 8-channel versions with an individual latch per cup. It runs on 5 V, is triggered by a PWM signal from a flight-controller aux output or RC receiver channel, and releases either one payload per command or half the load as a salvo. It fits FPV-class drones and DJI M350-class enterprise drones via a quick-release plate; price is on request.
Multi-drop delivery of small 35 mm-class cylindrical payloads in one sortie
Search and rescue marker or beacon drops by authorized teams
Training drops with inert payloads
Enterprise drone payload-release integration on M350-class aircraft
Standards & references
Drone Rules, 2021 (India, G.S.R. 589(E)) — The Rules classify drones by all-up weight including payload, and the catalog requires the dropper plus payloads to stay within the aircraft's rated payload and centre-of-gravity limits.
FlySpark LD35 Multi-Channel Hanging Drone Payload Dropper is a parallel-rack release unit that carries 2, 4, 6 or 8 35 mm-class cylindrical payloads under a drone and releases them on command, one at a time or half of the load at once. It hangs from the airframe on a quick-release plate, operates at 5 V and is triggered by a standard PWM servo signal from the flight controller or directly from an RC receiver channel, so it integrates with FPV-class drones and DJI M350-class enterprise drones without proprietary electronics.
The LD35 is part of the FlySpark UAV Payload Droppers & Release Systems range, supplied and supported in India by AnuShakti Infotech Pvt. Ltd. for defence, government security, public-safety and professional integrator customers, with export enquiries welcome.
Every variant shares the same 104 mm width, 52 mm housing height, 5 V supply, PWM / remote trigger and quick-release interface; only the length changes, growing 50 mm for each extra pair of channels: 94 mm for the LD35-2, 144 mm for the LD35-4, 194 mm for the LD35-6 and 244 mm for the LD35-8. Each cup has its own latch, and payload fit is confirmed by FlySpark for the end user's approved payload.
FlySpark LD35 multi-channel drone payload dropper specification sheet – 2/4/6/8 channels, 5 V, PWM / remote, single or half-load releaseFlySpark LD35-4 4-channel drone payload dropper held in a technician's gloved hands on a workshop bench, showing its compact size
WHY CHOOSE THE LD35 MULTI-CHANNEL DRONE DROPPER
The LD35 puts up to eight payloads on one compact rack, so a single sortie can cover several drop points or deliver a group of items together. The standard PWM interface means it works with any flight controller or receiver that has a spare servo output, and the quick-release plate lets crews swap the dropper between aircraft or remove it for transport in seconds. A slim 52 mm housing keeps the payload close to the airframe for a low centre of gravity.
FlySpark LD35 multi-channel dropper mounted under a 10-inch FPV-class drone carrying orange inert training cylinders
LD35 DROPPER KEY FEATURES
• Multi-channel hanging dropper: 2, 4, 6 or 8 channels in a parallel rack
• Designed for 35 mm-class cylindrical payloads
• Compact housing: 104 mm wide and 52 mm high on every variant
• Length 94 / 144 / 194 / 244 mm for 2 / 4 / 6 / 8 channels
• PWM servo-signal trigger from flight controller or RC receiver
• Remote mode: direct RC channel on a transmitter switch
• 5 V operating voltage from the aircraft BEC or servo rail
• Single release or half-load salvo per command
• Quick-release plate mounting for fast fit and removal
• Dropper-side quick-release seat included (free upgrade)
• Aircraft-side quick-release plate matched to the airframe (sold separately)
• Compatible with FPV-class drones and DJI M350-class enterprise drones
• Machined metal cups with individual latch per channel
• Payload fit confirmed by FlySpark for the end user's approved payload
FlySpark LD35 drone dropper dimensions drawing – 94, 144, 194 and 244 mm length, 104 mm width, 52 mm height
HOW THE LD35 DROPPER WORKS
The pilot assigns a transmitter switch to the drop channel. The command reaches the dropper as a PWM servo pulse, either through a flight-controller auxiliary output or straight from a receiver channel (remote mode), and the latch servos open the selected cups. In single mode each command releases one payload for precise, sequential drops; in half-load salvo mode each command releases half of the loaded payloads together, so two commands empty the rack. Power is 5 V from the aircraft BEC or a regulated servo rail.
FlySpark LD35 drone dropper trigger and wiring diagram – PWM from flight controller or RC receiver, 5 V supplyFlySpark LD35 multi-channel drone dropper close-up of a machined aluminium payload cup with latch window and quick-release plate railFlySpark LD35 drone dropper release modes – single release or half-load salvo, payloads per command for each variant
COMPATIBLE AIRCRAFT & MOUNTING
The LD35 hangs under the aircraft on a quick-release plate. The dropper-side quick-release seat is included as a free upgrade, and the aircraft-side plate is matched to the airframe and sold separately. Typical carriers are FPV-class drones (7–10 inch class quadcopters and custom multirotors) for the 2- and 4-channel versions, and DJI M350-class enterprise drones or larger multirotors for the 6- and 8-channel versions. Always stay within the aircraft's rated payload and centre-of-gravity limits.
FlySpark LD35 dropper quick-release mounting stack and compatibility with FPV-class and DJI M350-class dronesFlySpark LD35 dropper under a DJI M350-class enterprise drone during a search-and-rescue exercise over hills
For armed forces, paramilitary units and government security agencies, the LD35 provides a compact, multi-payload release capability for marking, signalling, sensor emplacement, training and logistics under FPV-class and M350-class aircraft.
• Marker and screening smoke canister release for training and signalling
• Signalling and visual marker drops for ground teams
• Inert training payload drops for drone-crew qualification
• Sensor, beacon and relay emplacement in hard-to-reach terrain
• Emergency resupply of small items: tourniquet kits, batteries, radios, water purification tabs
• Decoy and reflector release during exercises
• Mothership deployment of small child payloads
• EOD and CBRN team training with inert drop items
• Perimeter-sensor seeding around bases and border posts
• Search and rescue of personnel with beacon and marker drops
• Integration of other authorised payloads by the end user in accordance with national law and procurement rules
CIVILIAN & COMMERCIAL APPLICATIONS
For emergency services, utilities, agriculture and research teams, the LD35 turns a standard drone into a precise multi-drop delivery tool for small, tube-packed items.
• Search and rescue drops: compact radios, flotation aids and medical kits
• Utility pilot-line drops for power-line stringing
• Firefighting: small extinguisher-capsule drops where the size fits
• Agriculture: seed balls and bio-control capsules
• Fishing bait release
• Wildlife research: tag, sensor and sample-tube placement
• Mountain and maritime rescue marker and beacon drops
• Events and displays with confetti or marker canisters
• University and R&D payload-release research
FlySpark LD35 4-channel dropper under an M350-class enterprise drone before take-off on a snowy mountain rescue missionFlySpark LD35 drone dropper releasing a pilot-line bag over a power-line conductor for utility stringing
COMPARE THE FLYSPARK DROPPER RANGE
The LD35 is the compact hanging multi-channel option for 35 mm-class cylindrical payloads. For a single payload a single-channel unit is lighter, for larger payload classes the cradle and heavy-rack series fit better, and the revolver unit carries five 35 mm-class payloads in a rotary layout.
• FlySpark ZD1-V3 – single-channel compact dropper for camera drones and FPV-class drones
• Aircraft-side quick-release plate sold separately
IMPORTANT USE NOTE
The LD35 is supplied only to verified end users. The buyer is responsible for using lawful payloads, obtaining airspace permissions and complying with export controls and local regulations. Never fly over people, confirm the drop zone is clear before every release, and do not exceed the aircraft's rated payload.
FREQUENTLY ASKED QUESTIONS
Q: What is a multi-channel drone payload dropper?
A: A multi-channel drone payload dropper is a release unit that carries several payloads side by side under a drone and lets the pilot release them one at a time or in groups from the remote controller. The FlySpark LD35 carries 2, 4, 6 or 8 payloads in a parallel rack.
Q: What is the FlySpark LD35?
A: The FlySpark LD35 is a multi-channel hanging drone payload dropper for 35 mm-class cylindrical payloads. It mounts under the aircraft on a quick-release plate, runs on 5 V, is triggered by a PWM or remote (RC channel) signal and releases either a single payload or half of the load per command.
A: It is designed for 35 mm-class cylindrical payloads such as inert training cylinders, marker and signalling canisters, beacons, sensor capsules and small rescue items packed in a 35 mm-class tube. Payload fit is confirmed by FlySpark for the end user's approved payload.
Q: How is the LD35 triggered?
A: By a standard PWM servo signal, either from a flight-controller auxiliary output or directly from an RC receiver channel mapped to a switch on the transmitter (remote mode). The unit operates at 5 V.
Q: What release modes does it support?
A: Single release (one payload per command) and half-load salvo (half of the loaded payloads released together). On the LD35-8, for example, a half-load command releases 4 payloads and two half-load commands empty the rack.
Q: How does the LD35 mount to the drone?
A: It hangs under the airframe on a quick-release plate. The dropper-side quick-release seat is included as a free upgrade; the aircraft-side quick-release plate is matched to the airframe and sold separately.
Q: Which drones is the LD35 compatible with?
A: FPV-class drones (typically 7–10 inch class quadcopters and custom multirotors) and DJI M350-class enterprise drones, using an aircraft-side plate matched to the airframe. Always stay within the aircraft's rated payload.
Q: Does the LD35 support light-sensor or CRSF triggering?
A: No. The LD35 is a PWM / remote unit. Light-sensor (auxiliary-light) and CRSF-serial triggering are offered on other FlySpark droppers.
Q: What are the dimensions of each variant?
A: All variants are 104 mm wide and 52 mm high; length is 94 mm (LD35-2), 144 mm (LD35-4), 194 mm (LD35-6) or 244 mm (LD35-8). Length grows by 50 mm for each additional pair of channels.
Q: What is the weight of the LD35?
A: Weight depends on the variant and the quick-release hardware fitted; it is confirmed with the quotation so you can check it against your aircraft's payload budget.
Q: What is the power requirement?
A: The dropper operates at 5 V, normally taken from the flight-controller BEC or a regulated 5 V servo rail on the aircraft.
Q: What is the LD35 drone dropper price in India?
A: Price is on request because the configuration (channel count, aircraft-side plate and integration support) is matched to each buyer. Contact FlySpark on WhatsApp or email for a quotation in INR or for export.
Q: Can I fit the LD35 to a DJI Matrice 350?
A: Yes, M350-class aircraft are supported through an airframe-matched aircraft-side quick-release plate (sold separately). FlySpark advises on plate selection and on wiring the trigger signal for your aircraft.
Q: Which variant should I choose?
A: Choose by payload count and aircraft lift: the LD35-2 and LD35-4 suit FPV-class drones, while the LD35-6 and LD35-8 are better matched to larger multirotors and M350-class aircraft with more payload margin.
Q: Can the LD35 be used for search and rescue?
A: Yes. It can drop small rescue items, marker canisters, beacons or radios packed in a 35 mm-class tube to people or teams in the field, one at a time or in groups.
Q: Can other payloads be integrated on the LD35?
A: The LD35 is supplied as a general-purpose payload release unit. Integration of any other authorised payload is the responsibility of the verified end user and must comply with national law, export controls and procurement rules.
Q: Who can buy the LD35?
A: It is supplied only to verified end users such as defence and government agencies, public-safety organisations, professional integrators, research institutions and licensed commercial operators.
Q: What is the lead time, and do you export?
A: Lead time is confirmed with the quotation and depends on variant and quantity. FlySpark supplies across India and handles export enquiries subject to end-user documentation and applicable export controls.
A: 1 year against manufacturing defects under approved use and normal operating conditions. Damage from crashes, overload, wrong voltage or unauthorised modification may not be covered.
Mission configurations
Configuration (4)
Select your operational configuration. Pricing may vary — request a formal quote for deployment quantities.
2-channel LD35 for 35 mm-class cylindrical payloads, 94 × 104 × 52 mm, 5 V, PWM / remote trigger, single or half-load release, quick-release seat included.
SKU: FSP-DRP-LD35-2
Unit Price (AUD, ex-works)POAAvailable
4-channel LD35 for 35 mm-class cylindrical payloads, 144 × 104 × 52 mm, 5 V, PWM / remote trigger, single or half-load release, quick-release seat included.
SKU: FSP-DRP-LD35-4
Unit Price (AUD, ex-works)POAAvailable
6-channel LD35 for 35 mm-class cylindrical payloads, 194 × 104 × 52 mm, 5 V, PWM / remote trigger, single or half-load release, quick-release seat included.
SKU: FSP-DRP-LD35-6
Unit Price (AUD, ex-works)POAAvailable
8-channel LD35 for 35 mm-class cylindrical payloads, 244 × 104 × 52 mm, 5 V, PWM / remote trigger, single or half-load release, quick-release seat included.
Buyer responsible for lawful payloads, airspace permissions and export controls
Flight safety
Never fly over people; confirm drop zone is clear before release
Payload limit
Stay within the aircraft's rated payload and centre-of-gravity limits
Warranty
1 Year manufacturing defect support under approved use and normal operating conditions
Supplier
FlySpark / AnuShakti Infotech Pvt. Ltd.
Frequently asked questions
How many payloads can the FlySpark LD35 dropper carry?
Two, four, six or eight 35 mm-class cylindrical payloads, depending on the LD35-2, LD35-4, LD35-6 or LD35-8 version.
How is the LD35 dropper triggered?
By a PWM signal from a flight-controller aux output or an RC receiver channel, at 5 V. Light-sensor and CRSF triggering are not supported on this model.
Can the LD35 release all payloads at once?
It releases either one payload per command or half the load as a salvo: 1, 2, 3 or 4 payloads per command on the 2-, 4-, 6- and 8-channel versions.
What are the dimensions of the LD35 droppers?
LD35-2 is 94 × 104 × 52 mm, LD35-4 144 × 104 × 52 mm, LD35-6 194 × 104 × 52 mm and LD35-8 244 × 104 × 52 mm.
Does the LD35 fit a DJI M350?
The catalog lists FPV-class drones and DJI M350-class enterprise drones as compatible, using the quick-release plate; the aircraft-side plate is sold separately.
Can FlySpark export the FlySpark LD35 Multi-Channel Hanging Drone Payload Dropper internationally?
Yes. The FlySpark LD35 Multi-Channel Hanging Drone Payload Dropper ships to defense, security, and critical-infrastructure buyers in our 10 export markets and other authorized destinations, with full export documentation — end-user certification, dual-use classification, and destination-specific compliance handled before dispatch.
What configurations of the FlySpark LD35 Multi-Channel Hanging Drone Payload Dropper are available?
The FlySpark LD35 Multi-Channel Hanging Drone Payload Dropper is offered in 4 configurations so you can match range, payload, and integration requirements. Custom builds are available for volume orders.
Do you provide technical support and documentation for the FlySpark LD35 Multi-Channel Hanging Drone Payload Dropper?
Every FlySpark LD35 Multi-Channel Hanging Drone Payload Dropper order includes datasheets, integration guidance, and compliance paperwork. Our engineering team supports commissioning, spares, and field deployment.
How do I request a quote for the FlySpark LD35 Multi-Channel Hanging Drone Payload Dropper?
Pricing for the FlySpark LD35 Multi-Channel Hanging Drone Payload Dropper is quoted on request. Contact the export desk with your quantity and destination for a formal quote that includes export documentation, compliance handling, and freight.
Can FlySpark export FlySpark LD35 Multi-Channel Hanging Drone Payload Dropper | 2/4/6/8-Channel Parallel Release, 35 mm-Class Cylindrical Payloads, Quick-Release Plate, PWM / Remote Trigger, 5 V & Single or Half-Load Salvo to Australia?
Yes. FlySpark ships to Australia on the India → Asia-Pacific air freight lane; transit is typically 5–10 days. Counter-UAS and RF items require an authorized end user and may need an import permit — we handle the export documentation with you.
What does FlySpark LD35 Multi-Channel Hanging Drone Payload Dropper | 2/4/6/8-Channel Parallel Release, 35 mm-Class Cylindrical Payloads, Quick-Release Plate, PWM / Remote Trigger, 5 V & Single or Half-Load Salvo cost in Australia?
The indicative price is Quote on request (AUD, ex-works India, converted from INR on 2026-11-20). Freight, insurance and Australia import duties are quoted separately; the formal offer is issued in AUD on WhatsApp or email.
How long does delivery to Australia take?
Standard configurations ship in 3–6 weeks after order confirmation; air freight to Australia then takes 5–10 days. Custom builds and larger quantities are scheduled at quotation.
publicBuying FlySpark LD35 Multi-Channel Hanging Drone Payload Dropper | 2/4/6/8-Channel Parallel Release, 35 mm-Class Cylindrical Payloads, Quick-Release Plate, PWM / Remote Trigger, 5 V & Single or Half-Load Salvo from Australia
FlySpark exports FlySpark LD35 Multi-Channel Hanging Drone Payload Dropper | 2/4/6/8-Channel Parallel Release, 35 mm-Class Cylindrical Payloads, Quick-Release Plate, PWM / Remote Trigger, 5 V & Single or Half-Load Salvo to Australia from our facility in Gandhinagar, India. Systems ship on the India → Asia-Pacific air freight lane with a typical transit time of 5–10 days once documentation clears. Quotes are issued in AUD (EXW Gandhinagar; DAP/CIF on request), and every shipment includes a commercial invoice, packing list and certificate of origin.
Lead time: 3–6 weeks ex-works, plus 5–10 days transit to Australia
Import duty and VAT/GST in Australia are payable by the buyer; we declare accurate HS codes and values
Payment: bank transfer (TT) or letter of credit; 50% advance, balance before dispatch
Remote commissioning, operator training and spares support in Australia via video call and courier
verified_userRF and counter-UAS equipment is supplied to authorized end users only. Depending on Australia regulations an import permit and an end-user certificate (EUC) may be required — our export desk prepares the paperwork with you before dispatch.
Global export · local pricing
FlySpark LD35 Multi-Channel Hanging Drone Payload Dropper | 2/4/6/8-Channel Parallel Release, 35 mm-Class Cylindrical Payloads, Quick-Release Plate, PWM / Remote Trigger, 5 V & Single or Half-Load Salvo — priced in 15 country editions
FlySpark exports this system worldwide with end-user certification, dual-use classification, and destination-specific compliance. Open your country edition for indicative local pricing; the binding quote is issued on WhatsApp in your currency.