The FlySpark TK1000 is a heavy-duty tracked UGV chassis that climbs stairs carrying a 100 kg rated load. It is meant for inspection, security and building-access robots. It climbs 40° unloaded, clears 180 mm obstacles, runs 4 hours on a 48 V 60 Ah battery, is rated IP65 and is driven by two 48 V 1000 W brushless motors with Serial/CAN integration.
The FlySpark TK1000 is a stair-climbing robot platform built on a heavy-duty tracked robot tank chassis, made for robots that must carry real equipment up staircases, through buildings and across rough outdoor ground. It carries a 100kg rated payload, climbs slopes up to 40°, steps over 180mm obstacles and runs for about 4 hours on its 48V 60Ah lithium battery, all in a 1000 × 790 × 430mm footprint that fits through doors, corridors and stairwells.
FlySpark TK1000 product overview video
The TK1000 is part of the FlySpark Unmanned Ground & Surface Vehicles (UGV / USV) range and is supplied and integrated in India by FlySpark / AnuShakti Infotech Pvt. Ltd. The hull is built from high-carbon steel with a baked electrostatic paint finish, and rides on a Christie + Matilda four-wheel set balanced suspension composite shock-absorption system. That combination keeps the 150mm Kevlar-reinforced rubber tracks pressed onto stair edges and broken ground while damping shocks to the payload, so the TK1000 climbs stairs flexibly under load and moves smoothly through buildings and complex field terrain.
FlySpark TK1000 tracked robot tank chassis component callouts – antennas, control panel with emergency stop, Christie + Matilda suspension, 150mm Kevlar tracks and steel hullFlySpark TK1000 stair climbing robot chassis climbing a concrete staircase in a building stairwell
Two 48V 1000W brushless DC motors drive the tracks, each with an industrial-grade 1000-line incremental photoelectric encoder for accurate speed feedback and smooth closed-loop control. Speed is adjustable from 0 to 5.4km/h, braking is by motor brake, and the chassis can spin in place even at its full 100kg rated load. Protection is IP65 and the operating range is -20°C to 60°C, so it works in rain, dust and hot or cold sites.
WHY CHOOSE THE TK1000 STAIR-CLIMBING ROBOT CHASSIS
The TK1000 is designed as an open unmanned ground vehicle platform, not a closed vehicle. Its main controller runs open-loop and PID closed-loop control, accepts velocity commands from a host computer over Serial or CAN with a published communication protocol, and reports linear and angular velocity back. Adding your own autonomy computer, ROS navigation stack, lidar, cameras, manipulator arm or mission payload is straightforward, and the reserved 48V 10A, 24V 5A and 12V 5A outputs power that equipment directly from the main battery.
FlySpark TK1000 UGV control and integration architecture – 2.4GHz remote, main controller, Serial/CAN host computer and ROS, drive motors and payload power rails
The standard 2.4GHz remote control gives forward, reverse, left, right and spin-in-place control with about 200m line-of-sight range in open areas. Replaceable long-range remote controllers, real-time HD 1080P video transmission, mesh self-organizing network control and 4G/5G remote control are available as upgrades for beyond-line-of-sight operations.
FlySpark TK1000 control, power distribution and Serial/CAN integration overview
COMPARE THE FLYSPARK UGV RANGE
FlySpark offers tracked and wheeled robot chassis so buyers can match payload, terrain and range to the mission. The TK1000 sits between the TK990 and the TK2100: it adds 20kg more payload, a steeper 40° climb and IP65 protection over the TK990, while staying compact enough for doors and stairwells where the 2100mm-long TK2100 is too large.
• FlySpark TK650 – lightweight tracked UGV chassis with 30kg payload and IP54, for indoor and light outdoor robots
• FlySpark TK990 – 80kg compact tracked chassis with stair climbing, 0–9km/h speed and 200mm fording
• FlySpark TK1000 – this model: 100kg load-carrying stair climber with 40° climbing and IP65
• FlySpark TK2100 – 300kg heavy-duty tracked UGV with 500mm wading and 800mm trench crossing
• FlySpark AM400 – 20kg Ackermann-steering wheeled UGV with up to 40km range for ROS research
• FlySpark AM600 – 50kg modular Ackermann-steering wheeled UGV with up to 60km range
• FlySpark OM600 – 250kg omnidirectional wheeled UGV for flat-floor logistics and inspection
FlySpark TK1000 compared with TK650, TK990, TK2100, AM400, AM600 and OM600 unmanned ground vehicle robot chassis – payload, speed, climb, stairs, endurance and IP rating
• 150mm rubber tracks with embedded Kevlar tensile layer
• High-carbon steel hull with baked electrostatic paint
• IP65 protection
• -20°C to 60°C operating temperature
• Motor brake
• 48V 60Ah lithium battery with protection
• 48V 10A, 24V 5A, 12V 5A payload power outputs
• Serial and CAN open protocol for secondary development
• 2.4GHz remote control, 200m line of sight
• Optional 1080P video, mesh radio and 4G/5G control
FlySpark TK1000 stair climbing robot missions – EOD robot platform, building recon, patrol, inspection, rescue, delivery and ROS research
DEFENCE & MILITARY APPLICATIONS
The TK1000’s stair-climbing ability, compact footprint and open Serial/CAN control make it a practical EOD robot platform and reconnaissance base for robots that must enter buildings, tunnels and confined spaces ahead of personnel.
• Explosive ordnance disposal (EOD) and IED-inspection robot platforms
• Building and stairwell reconnaissance in urban operations
• Perimeter security and base patrol robots
• CBRN detection and sampling robot carriers
• Remote surveillance camera and sensor mast platforms
• Tunnel, bunker and confined-space inspection
• Field-camp logistics carrier for equipment and supplies
• Robotics R&D and trials for defence research establishments
CIVILIAN & COMMERCIAL APPLICATIONS
For industry, public safety and research, the TK1000 provides a rugged, programmable carrier that handles stairs, walkways and outdoor ground with a 100kg payload.
• Stair-climbing delivery and building-service robots
• Industrial plant, substation and pipeline inspection
• Firefighting, search and rescue robots for multi-storey buildings
• Disinfection and epidemic-prevention robots
• Agricultural pesticide spraying and orchard logistics
• Mining, construction and tunnel survey support
• Police and private security patrol robots
• University, ROS and autonomous navigation research
• Film, survey and mobile camera platforms on rough ground
FlySpark TK1000 carrying a pan-tilt inspection camera on an industrial plant walkway
• FlySpark TK1000 tracked chassis with 2 × 48V 1000W brushless drive motors and encoders
• 48V 60Ah lithium battery with overcharge and over-discharge protection
• AC 220V independent aviation-plug charger
• 2.4GHz remote control
• Main controller with Serial and CAN interfaces
• Communication protocol documentation for secondary development
• Operator manual and commissioning support
IMPORTANT USE NOTE:
The TK1000 is a mobile robot chassis for lawful industrial, security, research, rescue, defence and logistics applications. Operate it only on sites where you have permission, keep people clear of the tracks and below the chassis when climbing stairs, respect the 100kg rated load, avoid water deeper than splash level, and follow local safety, RF and site regulations. Optional radio links must be used only on legally permitted frequencies and power levels.
FREQUENTLY ASKED QUESTIONS:
Q: What is a stair climbing robot or tracked UGV?
A: A tracked UGV (unmanned ground vehicle) is a remotely operated or autonomous robot that drives on rubber or steel tracks instead of wheels. Tracks spread the load and grip stair edges, rubble and mud, which is why tracked robot chassis are the usual base for stair climbing robots, EOD robots and inspection robots.
Q: What is the FlySpark TK1000?
A: The FlySpark TK1000 is a compact, heavy-duty tracked robot chassis (tank chassis) built to climb stairs while carrying a load. It has a 100kg rated payload, 40° maximum climbing angle, 180mm obstacle clearance, 4 hours endurance and IP65 protection, and serves as an open base for security, inspection, EOD, rescue and research robots.
Q: Can the TK1000 really climb stairs?
A: Yes. Load-carrying stair climbing is a core design goal. The 150mm Kevlar-reinforced rubber tracks and the Christie + Matilda four-wheel balanced suspension keep the tracks pressed onto stair edges, so the chassis can climb standard building staircases and move between floors. Always test with your actual payload and stair geometry before deployment.
Q: What is the payload capacity of the TK1000?
A: The rated load capacity is 100kg, at which the chassis can still turn in place. Some marketing material quotes up to 120kg; FlySpark specifies the conservative 100kg rated figure for reliable operation, especially on stairs and slopes.
Q: How long does the TK1000 run on one charge?
A: Endurance is about 4 hours from the standard 48V 60Ah lithium battery, depending on payload, terrain, stair climbing, speed and temperature. The pack has overcharge and over-discharge protection and charges from the included AC 220V charger through an independent aviation plug.
Q: What motors drive the TK1000 and how fast is it?
A: Two 48V 1000W brushless DC motors, each paired with an industrial-grade 1000-line incremental photoelectric encoder for precise speed feedback and closed-loop control. Braking is by motor brake, and speed is adjustable from 0 to 5.4km/h (a higher-speed configuration up to about 7.2km/h can be discussed for flat-ground use).
Q: What terrain can the TK1000 handle?
A: It climbs slopes up to 40° (unloaded), steps over obstacles up to 180mm high, climbs stairs under load and drives on grass, gravel, sand, mud, rubble and indoor floors. Trench-crossing width and fording depth are not rated, so avoid deep water.
Q: What are the dimensions and weight?
A: Overall dimensions are approximately 1000 × 790 × 430mm (L × W × H) and curb weight is approximately 145kg.
Q: What kind of suspension does it use?
A: A Christie + Matilda four-wheel set balanced suspension composite shock-absorption system. It combines coil-spring Christie suspension with Matilda-style balanced bogie wheel sets so the tracks follow uneven ground and stair edges while damping shocks to the payload.
Q: Is the TK1000 waterproof, and what temperatures can it work in?
A: The protection rating is IP65 — dust-tight and protected against water jets, suitable for rain and wet outdoor sites. It is not rated for submersion or fording. The operating temperature range is -20°C to 60°C.
Q: How is the TK1000 controlled?
A: It ships with a 2.4GHz remote control for forward, reverse, left, right and spin-in-place turning, with about 200m line-of-sight range in open areas. Replaceable long-range remote controllers are available for longer distances.
Q: Does the TK1000 robot chassis support ROS?
A: Yes. The main controller accepts host-computer velocity commands over Serial or CAN using an open communication protocol and reports linear and angular velocity back, so a ROS node on your onboard computer can drive it like any differential-drive base. It supports both open-loop and PID closed-loop control.
Q: Does the TK1000 support video transmission and 4G/5G control?
A: Yes, as options. The chassis can be configured with real-time HD 1080P video transmission, mesh self-organizing network control and 4G/5G remote control.
Q: How do I integrate a payload on the TK1000?
A: Mount cameras, LiDAR, a manipulator arm or a sensor mast on the flat steel top deck and power them from the reserved 48V 10A, 24V 5A and 12V 5A outputs. Keep the total within the 100kg rated load and the centre of gravity low for stair work; FlySpark can prepare the mounting and wiring plan.
Q: What is the TK1000 used for?
A: Stair-climbing robots, off-road robots, security and patrol robots, explosive ordnance disposal (EOD) robot platforms, building and plant inspection, agricultural spraying, disinfection and epidemic-prevention robots, and university or R&D autonomy projects.
Q: Is the TK1000 suitable as an EOD robot platform?
A: Yes, it is a common base for EOD and IED-inspection robots because it climbs stairs, carries 100kg and accepts a manipulator arm, cameras and radios through its Serial/CAN interface and payload power outputs. The arm, gripper and EOD tools are integrated per project.
Q: Can the TK1000 be armed?
A: The TK1000 is supplied as an unarmed mobile chassis and the standard supply contains no weapon payload. Any weapon or effector integration is only for lawful, authorised government end users, is subject to export-control and licensing rules, and is the responsibility of the integrator.
Q: What is the price of the TK1000 in India?
A: Price is on request because each chassis is configured to the customer’s payload, control and communication requirements. Contact FlySpark on WhatsApp or email for a quotation in INR or for export.
Q: What is the lead time, and can FlySpark export the TK1000?
A: The TK1000 is built on order and the lead time is confirmed with the quotation for your configuration. FlySpark supplies customers across India and can support export orders subject to applicable export-control and end-user documentation.
Q: How does the TK1000 compare with the TK990 and TK2100?
A: The TK990 is lighter (80kg payload, up to 9km/h) and the TK2100 is much larger (300kg payload, 500mm wading). The TK1000 sits between them with 100kg payload, a 40° climb and IP65 in a compact body sized for stairwells.
Q: Does FlySpark provide integration support?
A: Yes. FlySpark / AnuShakti Infotech Pvt. Ltd. supports payload mounting, power and data integration, autonomy-stack interfacing, commissioning, operator training and after-sales service.
Q: What warranty is included?
A: Warranty covers manufacturing defects for 1 year under approved use and normal operating conditions. Damage from overload, immersion, impact, falls on stairs due to misuse, wrong charging or unauthorized modification may not be covered.
Mission configurations
Configuration (5)
Select your operational configuration. Pricing may vary — request a formal quote for deployment quantities.
Standard TK1000 chassis with 48V 60Ah battery, charger, 2.4GHz remote control and Serial/CAN controller.
SKU: FSP-TK1000-UGV-STANDARD
Unit Price (CAD, ex-works)POAAvailable
TK1000 with long-range remote control, real-time HD 1080P video transmission and mesh self-organizing network radios.
SKU: FSP-TK1000-UGV-MESH
Unit Price (CAD, ex-works)POAAvailable
TK1000 configured for 4G/5G remote control and video for beyond-line-of-sight building and site operations.
SKU: FSP-TK1000-UGV-4G5G
Unit Price (CAD, ex-works)POAAvailable
TK1000 with payload deck mounting, pan-tilt camera integration and power wiring for patrol and inspection robots.
SKU: FSP-TK1000-UGV-INSPECT
Unit Price (CAD, ex-works)POAAvailable
TK1000 with host-computer integration support, Serial/CAN protocol onboarding, sensor mounting plan and commissioning for autonomous navigation projects.
SKU: FSP-TK1000-UGV-AUTONOMY
Unit Price (CAD, ex-works)POAAvailable
Active configuration
FlySpark TK1000 Stair-Climbing Tracked Chassis - Standard (IP65, 2.4GHz RC)
Standard TK1000 chassis with 48V 60Ah battery, charger, 2.4GHz remote control and Serial/CAN controller.
POA
CAD · indicative ex-works
SKU: FSP-TK1000-UGV-STANDARD
Configuration matrix
Compare all variants
Side-by-side specifications — click a column to select
Parameter
Unit Price (CAD, ex-works)
POA
POA
POA
POA
POA
Stock
Available
Available
Available
Available
Available
SKU
FSP-TK1000-UGV-STANDARD
FSP-TK1000-UGV-MESH
FSP-TK1000-UGV-4G5G
FSP-TK1000-UGV-INSPECT
FSP-TK1000-UGV-AUTONOMY
Technical Data Sheet
System Specifications
43 parameters across 7 categories
search
settingsGeneral6 fields
Product Type
Stair-climbing heavy-duty tracked robot / tank chassis
Forward / backward / left / right and in-place spinning
Control Distance
About 200m line of sight (long-range RC optional)
Controller Modes
Open-loop control and PID closed-loop control
Host Interface
Serial port and CAN bus, open protocol
Telemetry to Host
Linear and angular velocity
Secondary Development
Serial/CAN interfaces and communication protocol provided
Optional Upgrades
HD 1080P video transmission, mesh self-organizing network, 4G/5G control
settingsPower System 4
Battery
48V 60Ah lithium battery
Battery Protection
Overcharge and over-discharge protection
Payload Power Outputs
48V 10A, 24V 5A, 12V 5A
Charging
AC 220V independent aviation-plug charger
settingsSafety & Compliance 6
Lawful use only
Industrial, security, research, rescue, defence and logistics applications
Site safety
Keep people clear of tracks and below the chassis on stairs; operate only on permitted sites
Load limit
Do not exceed 100kg rated load; not rated for fording
RF rules
Use optional radio links only on legally permitted frequencies and power levels
Warranty
1 Year manufacturing defect support under approved use and normal operating conditions
Supplier
FlySpark / AnuShakti Infotech Pvt. Ltd.
Frequently asked questions
Can the FlySpark TK1000 climb stairs with a load?
Yes. It is a stair-climbing tracked chassis with a 100 kg rated load, 40° climbing angle (unloaded) and 180 mm obstacle clearance.
How long does the TK1000 run on a charge?
About 4 hours on its 48 V 60 Ah lithium battery.
Is the TK1000 waterproof?
It is rated IP65 (dust-tight, protected against water jets) and operates from −20 °C to 60 °C.
What is the TK1000's control range?
About 200 m line of sight with the standard 2.4 GHz remote; long-range RC, mesh radio and 4G/5G control are optional.
Can the TK1000 power 24 V payloads?
Yes. It provides 48 V 10 A, 24 V 5 A and 12 V 5 A payload outputs.
Can FlySpark export the FlySpark TK1000 Stair-Climbing Robot Tank Chassis – Tracked UGV Platform internationally?
Yes. The FlySpark TK1000 Stair-Climbing Robot Tank Chassis – Tracked UGV Platform ships to defense, security, and critical-infrastructure buyers in our 10 export markets and other authorized destinations, with full export documentation — end-user certification, dual-use classification, and destination-specific compliance handled before dispatch.
What configurations of the FlySpark TK1000 Stair-Climbing Robot Tank Chassis – Tracked UGV Platform are available?
The FlySpark TK1000 Stair-Climbing Robot Tank Chassis – Tracked UGV Platform is offered in 5 configurations so you can match range, payload, and integration requirements. Custom builds are available for volume orders.
Do you provide technical support and documentation for the FlySpark TK1000 Stair-Climbing Robot Tank Chassis – Tracked UGV Platform?
Every FlySpark TK1000 Stair-Climbing Robot Tank Chassis – Tracked UGV Platform order includes datasheets, integration guidance, and compliance paperwork. Our engineering team supports commissioning, spares, and field deployment.
How do I request a quote for the FlySpark TK1000 Stair-Climbing Robot Tank Chassis – Tracked UGV Platform?
Pricing for the FlySpark TK1000 Stair-Climbing Robot Tank Chassis – Tracked UGV Platform is quoted on request. Contact the export desk with your quantity and destination for a formal quote that includes export documentation, compliance handling, and freight.
Can FlySpark export FlySpark TK1000 Stair-Climbing Robot Tank Chassis – Tracked UGV Platform | 100kg Payload, 40° Climb, 180mm Obstacles, 4h Endurance, IP65, 2×1000W Brushless & Serial/CAN to Canada?
Yes. FlySpark ships to Canada on the India → North America air freight lane; transit is typically 8–14 days. Counter-UAS and RF items require an authorized end user and may need an import permit — we handle the export documentation with you.
What does FlySpark TK1000 Stair-Climbing Robot Tank Chassis – Tracked UGV Platform | 100kg Payload, 40° Climb, 180mm Obstacles, 4h Endurance, IP65, 2×1000W Brushless & Serial/CAN cost in Canada?
The indicative price is Quote on request (CAD, ex-works India, converted from INR on 2026-11-20). Freight, insurance and Canada import duties are quoted separately; the formal offer is issued in CAD on WhatsApp or email.
How long does delivery to Canada take?
Standard configurations ship in 3–6 weeks after order confirmation; air freight to Canada then takes 8–14 days. Custom builds and larger quantities are scheduled at quotation.
FlySpark exports FlySpark TK1000 Stair-Climbing Robot Tank Chassis – Tracked UGV Platform | 100kg Payload, 40° Climb, 180mm Obstacles, 4h Endurance, IP65, 2×1000W Brushless & Serial/CAN to Canada from our facility in Gandhinagar, India. Systems ship on the India → North America air freight lane with a typical transit time of 8–14 days once documentation clears. Quotes are issued in CAD (EXW Gandhinagar; DAP/CIF on request), and every shipment includes a commercial invoice, packing list and certificate of origin.
Lead time: 3–6 weeks ex-works, plus 8–14 days transit to Canada
Import duty and VAT/GST in Canada are payable by the buyer; we declare accurate HS codes and values
Payment: bank transfer (TT) or letter of credit; 50% advance, balance before dispatch
Remote commissioning, operator training and spares support in Canada via video call and courier
verified_userRF and counter-UAS equipment is supplied to authorized end users only. Depending on Canada regulations an import permit and an end-user certificate (EUC) may be required — our export desk prepares the paperwork with you before dispatch.
Global export · local pricing
FlySpark TK1000 Stair-Climbing Robot Tank Chassis – Tracked UGV Platform | 100kg Payload, 40° Climb, 180mm Obstacles, 4h Endurance, IP65, 2×1000W Brushless & Serial/CAN — priced in 15 country editions
FlySpark exports this system worldwide with end-user certification, dual-use classification, and destination-specific compliance. Open your country edition for indicative local pricing; the binding quote is issued on WhatsApp in your currency.