FlySpark Portable Drone Detection Device | 100MHz–6GHz Passive CRPC / DroneID / RID Analysis System

Key facts

At a glance

The FlySpark Portable Drone Detection Device is a passive, case-integrated drone detector covering 100 MHz–6 GHz that identifies drones by protocol analysis (CRPC, DJI DroneID and Remote ID) and supports single-station positioning of non-cooperative targets. It has a 13.3-inch 1920 × 1080 screen, an IP66 closed-state case, dual 28.8 V / 9 Ah batteries for 6–7 hours and a weight of 14.4 kg. It transmits no signal and is priced at £23,350

Use cases

• Drone detection and identification at airports, refineries, power plants and ports
• Public safety and event perimeter monitoring
• Locating drones via protocol analysis for evidence and compliance work
• Long field shifts on battery power

Standards & references

• IEC 60529 Degrees of protection provided by enclosures (IP Code) — Defines the IP66 code stated for the closed case: dust-tight and protected against powerful water jets.
• ITU Radio Regulations — Defines the international allocations of the 100 MHz–6 GHz bands monitored; the device is receive-only.

Sources: FlySpark catalog data; FlySpark product page. Updated 12 Oct 2026.

Intelligence Brief

Mission overview

FlySpark Portable Drone Detection Device | 100MHz–6GHz Passive CRPC / DroneID / RID Analysis System

The FlySpark Portable Drone Detection Device is a professional all-in-one passive UAV detection and protocol-analysis system designed for authorized security teams, public safety units, critical infrastructure sites, industrial facilities, event protection and counter-UAV detection support. It works in passive receiving mode and does not actively transmit radio signals during detection.

The system supports 100MHz–6GHz detection coverage with key bands including 433MHz, 900MHz, 1.4GHz, 2.4GHz, 5.2GHz and 5.8GHz. It supports CRPC analysis, DroneID analysis and RID analysis, enabling drone brand, model, ID and frequency-band identification where supported by the target signal.

KEY FEATURES & BENEFITS:

• Passive All-in-One Drone Detection:
• • Passive receiving mode — no active radio signal transmission
• • 100MHz–6GHz detection frequency range
• • Up to 5km detection and analysis range under favorable conditions

• Advanced Protocol Analysis:
• • CRPC detection and analysis
• • DroneID analysis and RID analysis
• • Non-standard CRPC detection and analysis
• • Single-station positioning through protocol analysis
• • Brand, model, ID and frequency-band identification

• Professional Portable Case Design:
• • Integrated all-in-one portable case with IP66 closed-state protection
• • 13.3-inch TFT LCD screen, 1920×1080 resolution
• • Closed state: 470mm × 357mm × 176mm
• • Weight: 14.4kg including two lithium batteries

• Power & Field Endurance:
• • Dual lithium battery system: 28.8V / 9Ah × 2
• • Endurance: 6–7 hours with dual batteries
• • Operating power consumption: 71W in detection mode

• Smart Security Management:
• • Blacklist and whitelist support with power-off proof list management

IMPORTANT USE NOTE: This product is a passive drone detection, identification and protocol-analysis device. It is not a jammer and does not disable, block, spoof, hijack or interfere with drones by itself.

APPLICATIONS: Public safety drone detection, critical infrastructure protection, airport perimeter support, industrial site security, event monitoring and authorized counter-UAV detection support.

FREQUENTLY ASKED QUESTIONS: