FlySpark Anti-Thermal Camouflage Suit | Anti-Infrared, Anti-Drone Thermal Imaging Concealment Suit – Snow & Woodland Green Camo Jacket, Trousers, Mittens & Overboots, Waterproof, XS–2XL

FlySpark Anti-Thermal Camouflage Suit is an anti-infrared, anti-drone thermal imaging concealment suit in snow digital camouflage. It combines a waterproof pearl-white outer shell with a grey digital pattern and a dark grey ripstop anti-infrared inner layer, so the wearer’s body heat is blocked and spread out and the outside of the suit stays close to the temperature of the snow around them. The result is a greatly reduced thermal signature on drone, handheld and fixed thermal cameras. For forest, jungle and grassland, the same suit is available in woodland green, olive drab / green digital and desert camo as custom patterns on request.

The set covers the whole body: a hooded jacket, trousers, mittens and overboot foot covers, in unisex adult sizes XS to 2XL. Fabric weight is 240 g/m². It is part of the FlySpark Counter-UAS & Anti-Drone Defense range, supplied and supported in India by AnuShakti Infotech Pvt. Ltd., with export enquiries welcome. Custom patterns, sizes and anti-IR fabric by the roll for vehicle and equipment covers are available on request.

COLOUR & PATTERN OPTIONS

The standard suit is snow digital camo. Woodland green, olive drab / green digital and desert patterns are made to order in the same four-piece cut with the same anti-IR inner layer; the outer print is chosen to match the terrain. Pattern details, minimum quantity and lead time are confirmed with the quotation.

• • Snow digital camo (standard) – pearl-white base with grey pixel pattern, for snow, glaciers and high-altitude terrain
• • Woodland green camo (custom pattern, on request) – greens and browns for forests, jungle edges and green farmland
• • Olive drab / green digital camo (custom pattern, on request) – for mixed scrub, grassland and plains
• • Desert patterns (custom pattern, on request) – for arid, sandy and rocky ground

WHY ANTI-THERMAL CAMOUFLAGE MATTERS

Small FPV and reconnaissance drones with thermal cameras have changed what it means to be hidden. A person who is invisible to the naked eye at night, or under light foliage and snow-laden branches, glows brightly on a thermal screen because the body is far warmer than the cold background. Ordinary camouflage uniforms do nothing about this. An anti-thermal suit attacks the problem directly by reducing the heat contrast between the wearer and the surroundings, which makes detection and identification from the air much harder.

HOW ANTI-THERMAL FABRIC WORKS

The dark grey ripstop anti-infrared inner layer sits between the body and the outer shell. It blocks most of the body’s radiated heat from reaching the outer fabric and diffuses what does get through across a wide area, so there are no bright hot spots. The outer shell can then settle close to ambient temperature. Its snow digital print is chosen for low IR reflectance, so it also avoids standing out under active infrared illumination. The hood, mittens and overboots close the usual gaps at the head, hands and feet.

• ANTI-THERMAL SUIT KEY FEATURES:
• • Greatly reduces the thermal (infrared) signature seen by drone and handheld thermal cameras
• • Dark grey ripstop anti-infrared inner layer blocks and spreads body heat
• • Outer surface settles close to ambient temperature in cold conditions
• • Snow digital camo: pearl-white base with grey pixel pattern, low-IR-reflectance print
• • Waterproof spandex/cotton outer shell, 240 g/m²
• • Full-coverage four-piece set: hooded jacket, trousers, mittens and overboots
• • Hood with drawcord to cover the head, one of the warmest areas on a thermal image
• • Front zip with storm flap; elastic cuffs and drawstring waist to seal out heat leaks
• • Unisex adult sizes XS to 2XL, worn over a uniform or winter layers
• • Woodland green, olive drab / green digital and desert patterns available as custom orders
• • Custom patterns, sizes and anti-IR fabric by the roll available on request

• KIT CONTENTS:
• • Hooded jacket – front zip with storm flap, attached hood with drawcord, anti-IR inner layer
• • Trousers – drawstring waist, elastic cuffs, anti-IR inner layer
• • Mittens (one pair) – cover the hands, which glow strongly on thermal cameras
• • Overboot foot covers (one pair) – pull over boots to mask warm feet and footwear

SIZING GUIDE

The suit is sized for adult men and women and is designed to be worn over a uniform or winter layers. Most users choose their normal size, or one size up for thick clothing. The ranges below are approximate; confirm with FlySpark before ordering, especially for bulk orders. Custom sizes are available on request.

• • XS – approx. height 150–160 cm, chest 82–88 cm
• • S – approx. height 160–167 cm, chest 88–94 cm
• • M – approx. height 167–174 cm, chest 94–100 cm
• • L – approx. height 174–180 cm, chest 100–106 cm
• • XL – approx. height 180–186 cm, chest 106–112 cm
• • 2XL – approx. height 186–193 cm, chest 112–120 cm

HOW TO WEAR IT FOR BEST RESULTS

• Cover the face and hands: use the hood, mittens and, where possible, a face covering in a matching colour. Exposed skin is the first thing a thermal camera picks up. • Keep the hood up and the drawcord snug so warm air does not escape around the neck. • Fit the overboots over your boots and tuck the trouser cuffs in. • Put the suit on and let it settle to ambient temperature before moving into position. • Limit time in direct sun: a sun-warmed suit contrasts with cold shade and snow. • Stay still and use terrain: rocks, snow banks and tree lines break up any remaining outline. • Remember breath, hot drinks, batteries and engines also show up. Manage them separately.

HOW THE SUIT KEEPS TROOPS HIDDEN FROM THERMAL DRONES

The suit is a passive protective layer: it improves the survivability of troops who must stay in position while enemy surveillance drones search for them. It works best as part of good concealment discipline.

• Night recon drones and FPV spotters: thermal cameras look for warm shapes against a cool background. The suit lowers that contrast, so the wearer is much harder to pick out and identify from the air. • Stay still under cover: movement draws the eye on a thermal screen. Lie or crouch under bushes, trees, rocks or netting and keep still when a drone is overhead. • Cover the face and hands: keep the hood up and the mittens on, and use a matching face covering where possible. Exposed skin is the brightest part of a person on a thermal image. • Reduce heat leaks at the cuffs and hood: tighten the hood drawcord, tuck the trouser cuffs into the overboots and keep the front zip and storm flap closed. • Combine the suit with natural cover, and use anti-IR fabric to cover vehicles, generators and other hot equipment so they do not give away the position. • Know what the suit cannot do: it does not defeat long exposure (the suit slowly warms), very hot ambient conditions, active radar, or ordinary visual cameras in daylight. Good field discipline is still needed.

DEFENCE & MILITARY APPLICATIONS

For armed forces, paramilitary units and border security agencies, the suit adds passive thermal concealment to existing camouflage, with no power, batteries or electronics to fail in the cold.

• • Concealment from enemy thermal drones: reducing the chance of detection by FPV and reconnaissance drones with thermal cameras
• • Observation posts and listening posts in snow and high-altitude terrain, including Himalayan border posts and glaciers
• • Reconnaissance patrols moving at night or in low light
• • Protecting drone-operator teams from counter-drone thermal detection while they launch and fly
• • Special-forces infiltration and exfiltration in snow and mountain terrain
• • Convoy and equipment concealment using anti-IR fabric covers over vehicles, generators and shelters
• • Casualty-evacuation teams working in exposed snowfields
• • Training troops to operate against thermal ISR (intelligence, surveillance and reconnaissance)
• • Border security forces on long winter watches

CIVILIAN & COMMERCIAL APPLICATIONS

The same properties that help troops stay hidden also help photographers, researchers and crews work close to wildlife and test thermal equipment.

• • Wildlife photography and observation: staying unseen in snow near shy animals such as foxes, ibex and snow leopards
• • Hunting in snow regions, where lawful and permitted
• • Wildlife research and field studies, including thermal-camera surveys
• • Film and TV production: winter shoots, thermal-camera scenes and documentary work
• • Red-team, security and thermal-camera testing: checking how well perimeter cameras pick up a person
• • Airsoft and training academies running night and winter scenarios
• • Adventure and winter expeditions as a waterproof white outer layer

LIMITATIONS AND HONEST NOTES

• • Masking, not invisibility: the suit greatly reduces the thermal signature but does not remove it.
• • Performance depends on ambient temperature, distance, the sensor used, exposure time and whether the face and hands are covered.
• • Exposed skin, breath, hot equipment and warm ground where you have been lying can still be seen.
• • Long exposure to direct sun or heavy exertion can raise the surface temperature and reduce masking.
• • The standard snow pattern suits snow and high-altitude terrain; for forest, grassland or desert, order a custom woodland, olive or desert pattern.
• • Results should be tested in the end user’s own conditions with their own sensors before relying on them.

CARE AND WASHING

• • Hand wash or gentle machine wash in cold water with a mild detergent
• • Do not bleach, tumble dry, iron or dry clean
• • Air dry in the shade, away from direct heat
• • Store dry and loosely folded; avoid sharp creases in the anti-IR layer
• • Clean off mud and fuel promptly; repair small tears before they spread

• STANDARD SUPPLY:
• • FlySpark Anti-Thermal Camouflage Suit, four-piece set (hooded jacket, trousers, mittens, overboot foot covers) in the size ordered
• • Snow digital camo (pearl-white base, grey pattern) as standard; woodland green, olive drab / green digital and desert patterns on request
• • Single packed size 35 × 28 × 15 cm, gross weight approx. 3.0 kg
• • Care and use guidance
• • Anti-IR fabric by the roll and custom covers supplied separately on request

IMPORTANT USE NOTE: For lawful use only. FlySpark supplies the anti-thermal camouflage suit to verified defence, police and government buyers and to lawful civilian users, and may ask for end-user details before supply. The buyer is responsible for complying with local law, hunting and wildlife regulations where applicable, and export-control rules. The suit reduces but does not eliminate the thermal signature; results depend on ambient temperature, distance, sensor, exposure time and whether the face and hands are covered.

FREQUENTLY ASKED QUESTIONS:

Q: What is an anti-thermal camouflage suit? A: An anti-thermal camouflage suit is protective outer clothing made with an anti-infrared (anti-IR) fabric layer. It blocks and spreads out body heat so the outside of the suit stays close to the surrounding temperature, which greatly reduces how strongly the wearer shows up on thermal imaging cameras. It is often called a thermal invisibility suit, but no suit makes a person completely invisible.

Q: What is the FlySpark Anti-Thermal Camouflage Suit? A: It is a four-piece anti-thermal set, in snow digital camo as standard (woodland green and olive patterns on request): a hooded jacket, trousers, mittens and overboot foot covers. The outer shell is a waterproof spandex/cotton blend in pearl-white with a grey digital pattern, with a dark grey ripstop anti-infrared inner layer. Fabric weight is 240 g/m², and it comes in sizes XS to 2XL for adult men and women.

Q: What is the anti-thermal suit price in India? A: Price is on request because it depends on size mix, quantity, pattern and whether you also need anti-IR fabric by the roll. Contact FlySpark on WhatsApp or email for a quotation in INR or for export.

Q: Does the suit work against drones with thermal cameras? A: Yes, that is its main purpose. FPV and reconnaissance drones increasingly carry thermal cameras that pick out warm bodies at night and through light foliage. The suit masks most of the body’s thermal signature, so the wearer is much harder to detect and identify from the air. How well it works depends on ambient temperature, distance, the sensor, exposure time and whether the face and hands are covered.

Q: Does it make me invisible to thermal cameras? A: No. It greatly reduces the thermal signature but does not remove it. Exposed skin, breath, hot equipment, recent heavy exertion and a warm patch left on the ground can still be seen. Treat it as one layer of concealment, used together with terrain, stillness and good field discipline.

Q: Does it work against night vision (image intensifier) devices as well as thermal? A: Thermal cameras and night-vision devices work differently. Thermal cameras see emitted heat; night-vision devices amplify reflected light, including near-infrared. The suit is designed mainly to reduce the thermal (heat) signature, and its snow print is chosen for low IR reflectance, but it is not a dedicated night-vision countermeasure. Results against a specific device should be tested in the end user’s own conditions.

Q: How does ambient temperature affect performance? A: The suit works best when the outside surface can settle close to the background temperature, as in cold snow and high-altitude terrain. In hot conditions, or after long exposure to direct sun, the outer fabric can warm up and the contrast with the background changes. Masking is strongest in cold, still conditions and at longer distances.

Q: Which sizes are available? A: Six unisex adult sizes: XS, S, M, L, XL and 2XL. The suit is worn over a uniform or winter layers, so most users choose their normal size or one size up for thick clothing. Size ranges on the chart are approximate; confirm with FlySpark before ordering. Custom sizes are available on request.

Q: What comes in the set? A: One set includes a hooded jacket with front zip and storm flap, trousers with a drawstring waist and elastic cuffs, a pair of mittens, and a pair of overboot foot covers. Packed size is 35 × 28 × 15 cm and gross weight is about 3.0 kg.

Q: Is the suit waterproof? Can I use it in rain or wet snow? A: The outer shell is waterproof, so it can be worn in snow, sleet and rain. Water and wet snow on the surface can change how the suit looks on a thermal image, so let it settle to ambient conditions and test it in your own environment.

Q: How durable is it? A: The outer shell is a 240 g/m² spandex/cotton blend and the inner layer is ripstop, which resists small tears spreading. As with any camouflage clothing, abrasion on rock and ice, sharp kit and repeated washing will wear the fabric over time. Follow the care instructions to keep the anti-IR layer in good condition.

• Q: Can I order in bulk for a unit or organisation?
• A: Yes. FlySpark handles bulk orders for defence, police, government and institutional buyers, with mixed size runs. Lead time is confirmed with the quotation.

Q: Are custom camouflage patterns available? A: Yes. Custom patterns, for example woodland, desert or mountain-rock variants, and custom sizes are available on request. Minimum quantity and lead time are confirmed with the quotation.

Q: Is it available in green / woodland camo? A: Yes, as a custom pattern on request. The standard suit is snow digital camo (pearl-white base, grey pattern). The same four-piece suit, with the same anti-IR inner layer, can be made in woodland green camo (greens and browns), olive drab or green digital camo, and desert patterns. Minimum quantity and lead time are confirmed with the quotation.

Q: Which pattern should I choose? A: Match the pattern to the terrain where the suit will be used. Choose snow digital camo for snow, glaciers and high-altitude posts; woodland green for forests, jungle edges and green farmland; olive drab or green digital for mixed scrub, grassland and plains; and desert patterns for arid and rocky ground. The pattern handles visual concealment, while the anti-IR layer handles thermal masking. Many units order snow and green sets for seasonal use.

Q: Can I buy the anti-IR fabric by the roll? A: Yes. Anti-infrared fabric is available by the roll on request, for making covers for vehicles, generators, drone-operator positions and other equipment. The same principle applies: the fabric helps mask engine and equipment heat from thermal cameras, within the same limits as the suit.

• Q: Do you export the suit?
• A: FlySpark supplies across India and handles export enquiries, subject to end-user verification and applicable export-control rules.

Q: Why do you verify end users? A: Anti-thermal camouflage is sensitive equipment. FlySpark supplies it to verified defence, police and government buyers and to lawful civilian users such as wildlife photographers, researchers and film crews. We may ask for organisation details or an end-use statement before supply.

Q: What warranty is included? A: Warranty covers manufacturing defects for 6 months under normal use and correct care. Wear and tear, cuts, burns, abrasion damage and damage from incorrect washing are not covered.

Q: Does FlySpark offer other counter-drone products? A: Yes. The anti-thermal suit sits in the FlySpark Counter-UAS & Anti-Drone Defense range. FlySpark / AnuShakti Infotech Pvt. Ltd. can advise on combining passive concealment with drone detection and other counter-drone measures.